[Wed Jul  4 06:02:46 2012] Detection parameters:
  Position = (301.9, 322.0) = 11 27 16.35 19 9 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6137.8 +/- 92.8
  Background counts = 6.7
  Rate = 0.6 +/- 0.008

[Wed Jul  4 06:02:46 2012] Off-axis axis estimate = 1.73'
[Wed Jul  4 06:39:15 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 06:39:15 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jul  4 06:39:15 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Jul  4 06:39:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Jul  4 06:58:23 2012] fullrun_mos2_xmm0601780301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul  4 06:58:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780301_pi300-10000_cl_pass0_src1.csv
[Wed Jul  4 06:58:23 2012] fullrun_mos2_xmm0601780301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul  4 06:58:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780301_pi300-10000_cl_pass0_src1.csv
[Wed Jul  4 06:58:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 06:58:23 2012] fullrun_mos2_xmm0601780301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul  4 06:58:23 2012] fullrun_mos2_xmm0601780301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul  4 06:58:23 2012] Fit fullrun_mos2_xmm0601780301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul  4 06:58:30 2012] Spatial fit model total counts = 5101.150000, observed total counts = 5530.000000
[Wed Jul  4 06:58:30 2012] Offset between fit and detection position for source 1 = 0.179593 pixels
[Wed Jul  4 06:58:30 2012] 4961.302300 total counts/ 85.682300 bgd. counts: snr = 526.725437
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.179593 pixels
  Position = (301.8, 322.2) = 11 27 16.38 19 9 20.9
  Extent = 6.4 (6.4-6.4)", rotation angle = 0
  Source counts = 4875.6 +/- 70.4
  Background counts = 85.7
  Rate = 0.4 +/- 0.006
[Wed Jul  4 06:58:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 06:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 06:58:30 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 06:58:30 2012] Source does appear to be extended
[Wed Jul  4 06:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 07:30:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul  4 07:30:25 2012] Initial guess for spatial extent in simple fitting = 6.42"
[Wed Jul  4 07:30:25 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.024
[Wed Jul  4 07:30:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.42"
[Wed Jul  4 07:46:05 2012] fullrun_mos2_xmm0601780301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul  4 07:46:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601780301_pi300-10000_cl_pass1_src1.csv
[Wed Jul  4 07:46:06 2012] fullrun_mos2_xmm0601780301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul  4 07:46:06 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601780301_pi300-10000_cl_pass1_src1.csv
[Wed Jul  4 07:46:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 07:46:07 2012] fullrun_mos2_xmm0601780301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul  4 07:46:07 2012] fullrun_mos2_xmm0601780301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul  4 07:46:07 2012] Fit fullrun_mos2_xmm0601780301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul  4 07:46:13 2012] Spatial fit model total counts = 5688.250000, observed total counts = 5526.000000
[Wed Jul  4 07:46:13 2012] Offset between fit and detection position for source 1 = 0.147722 pixels
[Wed Jul  4 07:46:13 2012] 5742.100000 total counts/ 1487.290000 bgd. counts: snr = 110.327135
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.147722 pixels
  Position = (301.7, 322.0) = 11 27 16.41 19 9 20.4
  Extent = 5.4 (5.3-5.6)", rotation angle = 0
  Source counts = 4254.8 +/- 75.8
  Background counts = 1487.3
  Rate = 0.4 +/- 0.007
[Wed Jul  4 07:46:13 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 07:46:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 07:46:13 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 07:46:13 2012] Source does appear to be extended
[Wed Jul  4 07:46:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 08:37:51 2012] Counts = 4254.810000, rescaling region sizes by 2.000000
[Wed Jul  4 08:37:51 2012] XMMSAS src. selection expression = ellipse(26201.478000, 27969.194400, 651.518419, 651.518419, 0.000000, X, Y)
[Wed Jul  4 08:37:51 2012] Writing source region out to fullrun_mos2_xmm0601780301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul  4 08:37:51 2012] Extracting stamp from image fullrun_mos2_xmm0601780301_pi300-10000_cl_sm2.00.img.gz, (264, 285) - (339, 359)
[Wed Jul  4 08:37:51 2012] XMMSAS bgd. selection expression = annulus(26201.478000, 27969.194400, 2171.728062, 4343.456125, X, Y) && !ellipse(25440.768921, 27674.277802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24242.896698, 28389.866608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22938.632400, 26819.024020, 604.850538, 604.850538, 0.000000, X, Y)
[Wed Jul  4 08:37:51 2012] Writing fullrun_mos2_xmm0601780301_pi300-10000_pass1_cl_src1.gif
[Wed Jul  4 08:37:52 2012] Mean detx,y = (46.79, 105.40) 
[Wed Jul  4 08:37:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 08:38:01 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 08:38:01 2012] Setting source spectrum file to fullrun_mos2_xmm0601780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul  4 08:38:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601780301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul  4 08:44:02 2012] Updating aperture counts using extracted products
[Wed Jul  4 08:44:02 2012] Error reading totcts from fullrun_mos2_xmm0601780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul  4 08:44:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 08:44:02 2012] Using photon index=1.80, rate=0.366, arf fullrun_mos2_xmm0601780301_pi300-10000_pass1_cl_src1.arf
[Wed Jul  4 08:44:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 08:44:02 2012] Updating source flux to 4.1e-12
[Wed Jul  4 08:44:21 2012] Reading fit data from xmm0601780301/analysis//spectral/fullrun_mos2_xmm0601780301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul  4 08:44:21 2012] Spectral fit parameter nH value = 1.80507e+20
[Wed Jul  4 08:44:21 2012] Spectral fit parameter PhoIndex value = 1.38288
[Wed Jul  4 08:44:21 2012] Failed to get F(0.3-8.0) from xmm0601780301/analysis//spectral/fullrun_mos2_xmm0601780301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul  4 08:44:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 08:44:21 2012] Using Nh = 1.8e+20, photon index=1.38, rate=0.366, arf fullrun_mos2_xmm0601780301_pi300-10000_pass1_cl_src1.arf
[Wed Jul  4 08:44:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 08:44:21 2012] Updating source flux to 5.1e-12