[Wed Jul  4 06:02:33 2012] Detection parameters:
  Position = (370.4, 322.1) = 11 26 55.33 19 9 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.4 +/- 12.0
  Background counts = 6.9
  Rate = 0.009 +/- 0.001

[Wed Jul  4 06:02:33 2012] Off-axis axis estimate = 5.49'
[Wed Jul  4 06:28:13 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 06:28:13 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Wed Jul  4 06:28:13 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.102
[Wed Jul  4 06:28:13 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.17"
[Wed Jul  4 06:39:15 2012] fullrun_mos1_xmm0601780301_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul  4 06:39:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780301_pi300-10000_cl_pass0_src4.csv
[Wed Jul  4 06:39:15 2012] fullrun_mos1_xmm0601780301_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul  4 06:39:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780301_pi300-10000_cl_pass0_src4.csv
[Wed Jul  4 06:39:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601780301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601780301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 06:39:15 2012] fullrun_mos1_xmm0601780301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul  4 06:39:15 2012] fullrun_mos1_xmm0601780301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul  4 06:39:15 2012] Fit fullrun_mos1_xmm0601780301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Jul  4 06:58:28 2012] Source 7 is offset by -8.018232 and 1.368076 pixels which is larger than
2 X fitted extent = 1.055121 x 1.055121, not incorporating fit results
[Wed Jul  4 06:58:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 06:58:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 06:58:28 2012] Assessing source extent using major
[Wed Jul  4 06:58:28 2012] Source does appear to be extended
[Wed Jul  4 06:58:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 07:19:22 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 07:19:22 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Wed Jul  4 07:19:22 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.102
[Wed Jul  4 07:19:22 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.17"
[Wed Jul  4 07:30:25 2012] fullrun_mos1_xmm0601780301_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul  4 07:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780301_pi300-10000_cl_pass1_src4.csv
[Wed Jul  4 07:30:25 2012] fullrun_mos1_xmm0601780301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul  4 07:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780301_pi300-10000_cl_pass1_src4.csv
[Wed Jul  4 07:30:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601780301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601780301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 07:30:25 2012] fullrun_mos1_xmm0601780301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul  4 07:30:25 2012] fullrun_mos1_xmm0601780301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul  4 07:30:25 2012] Fit fullrun_mos1_xmm0601780301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jul  4 07:46:12 2012] Spatial fit model total counts = 150.114000, observed total counts = 150.000000
[Wed Jul  4 07:46:12 2012] Offset between fit and detection position for source 7 = 0.100669 pixels
[Wed Jul  4 07:46:12 2012] 149.521000 total counts/ 91.075500 bgd. counts: snr = 6.124213
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.100669 pixels
  Position = (370.3, 322.1) = 11 26 55.35 19 9 20.7
  Extent = 4.6 (3.9-5.7)", rotation angle = 0
  Source counts = 58.4 +/- 12.2
  Background counts = 91.1
  Rate = 0.005 +/- 0.001
[Wed Jul  4 07:46:12 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 07:46:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 07:46:12 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 07:46:12 2012] Source does appear to be extended
[Wed Jul  4 07:46:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 08:30:46 2012] XMMSAS src. selection expression = ellipse(32169.398800, 27977.881000, 278.691608, 278.691608, 0.000000, X, Y)
[Wed Jul  4 08:30:46 2012] Writing source region out to fullrun_mos1_xmm0601780301_pi300-10000_pass1_cl_src7_src.reg
[Wed Jul  4 08:30:46 2012] Extracting stamp from image fullrun_mos1_xmm0601780301_pi300-10000_cl_sm2.00.img.gz, (354, 306) - (386, 338)
[Wed Jul  4 08:30:46 2012] XMMSAS bgd. selection expression = annulus(32169.398800, 27977.881000, 464.486013, 928.972027, X, Y)
[Wed Jul  4 08:30:46 2012] Writing fullrun_mos1_xmm0601780301_pi300-10000_pass1_cl_src7.gif
[Wed Jul  4 08:31:09 2012] Mean detx,y = (-2257.96, 5162.08) 
[Wed Jul  4 08:31:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 08:31:13 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 08:31:13 2012] Setting source spectrum file to fullrun_mos1_xmm0601780301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul  4 08:31:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601780301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jul  4 08:37:25 2012] Not generating rmf since there are only 58 counts
[Wed Jul  4 08:37:25 2012] rmf not generated due to insufficient counts
[Wed Jul  4 08:44:02 2012] Updating aperture counts using extracted products
[Wed Jul  4 08:44:02 2012] Error reading totcts from fullrun_mos1_xmm0601780301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul  4 08:44:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 08:44:02 2012] Using photon index=1.80, rate=0.00503, arf fullrun_mos1_xmm0601780301_pi300-10000_pass1_cl_src7.arf
[Wed Jul  4 08:44:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 08:44:02 2012] Updating source flux to 8e-14
[Wed Jul  4 08:44:03 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Wed Jul  4 08:44:03 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting