[Thu Dec 29 10:31:16 2011] Detection parameters:
  Position = (281.2, 251.2) = 11 13 53.59 9 33 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.5 +/- 11.5
  Background counts = 20.0
  Rate = 0.005 +/- 0.001

[Thu Dec 29 10:31:18 2011] Off-axis axis estimate = 3.65'
[Thu Dec 29 10:36:59 2011] Using EEF radius (= 8.25 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 10:36:59 2011] Initial guess for spatial extent in simple fitting = 8.25"
[Thu Dec 29 10:36:59 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.087
[Thu Dec 29 10:36:59 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 8.25"
[Thu Dec 29 13:48:53 2011] fullrun_pn_xmm0601780201_pi300-10000_cl_pass0_src37.ximg exists
[Thu Dec 29 13:48:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601780201_pi300-10000_cl_pass0_src37.csv
[Thu Dec 29 13:48:53 2011] fullrun_pn_xmm0601780201_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu Dec 29 13:48:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601780201_pi300-10000_cl_pass0_src37.csv
[Thu Dec 29 13:48:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601780201_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601780201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 13:48:54 2011] fullrun_pn_xmm0601780201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu Dec 29 13:48:54 2011] fullrun_pn_xmm0601780201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu Dec 29 13:48:54 2011] Fit fullrun_pn_xmm0601780201_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu Dec 29 16:17:37 2011] Spatial fit model total counts = 264.939000, observed total counts = 265.000000
[Thu Dec 29 16:17:37 2011] Offset between fit and detection position for source 41 = 0.394039 pixels
[Thu Dec 29 16:17:37 2011] 263.342000 total counts/ 200.289000 bgd. counts: snr = 4.455303
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.394039 pixels
  Position = (281.1, 251.5) = 11 13 53.61 9 33 25.8
  Extent = 7.6 (4.7-11.2)", rotation angle = 0
  Source counts = 63.1 +/- 16.2
  Background counts = 200.3
  Rate = 0.005 +/- 0.001
[Thu Dec 29 16:17:37 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 16:17:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 16:17:37 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 16:17:37 2011] Source does appear to be extended
[Thu Dec 29 16:17:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 16:18:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 29 16:18:18 2011] Initial guess for spatial extent in simple fitting = 7.60"
[Thu Dec 29 16:18:18 2011] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.991
[Thu Dec 29 16:18:18 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 7.60"
[Thu Dec 29 18:53:15 2011] fullrun_pn_xmm0601780201_pi300-10000_cl_pass1_src33.ximg exists
[Thu Dec 29 18:53:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601780201_pi300-10000_cl_pass1_src33.csv
[Thu Dec 29 18:53:15 2011] fullrun_pn_xmm0601780201_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu Dec 29 18:53:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601780201_pi300-10000_cl_pass1_src33.csv
[Thu Dec 29 18:53:15 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601780201_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601780201_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 18:53:16 2011] fullrun_pn_xmm0601780201_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu Dec 29 18:53:16 2011] fullrun_pn_xmm0601780201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu Dec 29 18:53:16 2011] Fit fullrun_pn_xmm0601780201_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu Dec 29 20:53:55 2011] Warning, spatial fit 33 centroid is now closest to src. 39
[Thu Dec 29 20:53:55 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 20:53:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 20:53:55 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 20:53:55 2011] Source does appear to be extended
[Thu Dec 29 20:53:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 20:54:36 2011] XMMSAS src. selection expression = ellipse(24407.602160, 21835.910800, 455.812213, 455.812213, 0.000000, X, Y)
[Thu Dec 29 20:54:36 2011] Writing source region out to fullrun_pn_xmm0601780201_pi300-10000_pass1_cl_src41_src.reg
[Thu Dec 29 20:54:36 2011] Extracting stamp from image fullrun_pn_xmm0601780201_pi300-10000_cl_sm2.00.img.gz, (255, 225) - (307, 278)
[Thu Dec 29 20:54:36 2011] XMMSAS bgd. selection expression = annulus(24407.602160, 21835.910800, 759.687022, 1519.374044, X, Y) && !ellipse(25533.466800, 23935.572800, 1422.842441, 1422.842441, 0.000000, X, Y) && !ellipse(25980.464620, 20472.682200, 481.614414, 292.616808, 125.170695, X, Y)
[Thu Dec 29 20:54:36 2011] Writing fullrun_pn_xmm0601780201_pi300-10000_pass1_cl_src41.gif
[Thu Dec 29 21:50:36 2011] Mean detx,y = (1879.99, -1735.73) 
[Thu Dec 29 21:50:45 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 21:51:32 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 21:51:33 2011] Setting source spectrum file to fullrun_pn_xmm0601780201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Dec 29 21:51:33 2011] Setting bgd. spectrum file to fullrun_pn_xmm0601780201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu Dec 29 23:02:47 2011] Not generating rmf since there are only 63 counts
[Thu Dec 29 23:02:47 2011] rmf not generated due to insufficient counts
[Thu Dec 29 23:48:06 2011] Updating aperture counts using extracted products
[Thu Dec 29 23:48:06 2011] Error reading totcts from fullrun_pn_xmm0601780201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Dec 29 23:48:09 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 23:48:09 2011] Using photon index=1.80, rate=0.00477, arf fullrun_pn_xmm0601780201_pi300-10000_pass1_cl_src41.arf
[Thu Dec 29 23:48:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 23:48:09 2011] Updating source flux to 1.4e-14
[Thu Dec 29 23:48:58 2011] Source 41 has fewer than 100.000000 counts, skipping spectral fitting