[Thu Dec 29 10:33:30 2011] Detection parameters:
  Position = (293.9, 275.6) = 11 13 49.83 9 35 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6707.4 +/- 97.9
  Background counts = 8.3
  Rate = 0.5 +/- 0.007

[Thu Dec 29 10:33:32 2011] Off-axis axis estimate = 1.69'
[Thu Dec 29 15:14:10 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 15:14:10 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Dec 29 15:14:10 2011] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.954
[Thu Dec 29 15:14:10 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Thu Dec 29 16:17:18 2011] fullrun_mos2_xmm0601780201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec 29 16:17:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780201_pi300-10000_cl_pass0_src1.csv
[Thu Dec 29 16:17:18 2011] fullrun_mos2_xmm0601780201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec 29 16:17:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780201_pi300-10000_cl_pass0_src1.csv
[Thu Dec 29 16:17:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 16:17:19 2011] fullrun_mos2_xmm0601780201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec 29 16:17:19 2011] fullrun_mos2_xmm0601780201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec 29 16:17:19 2011] Fit fullrun_mos2_xmm0601780201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec 29 16:17:55 2011] Spatial fit model total counts = 6035.010000, observed total counts = 6035.000000
[Thu Dec 29 16:17:55 2011] Offset between fit and detection position for source 1 = 0.147290 pixels
[Thu Dec 29 16:17:55 2011] 6082.140000 total counts/ 1461.580000 bgd. counts: snr = 120.860203
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.147290 pixels
  Position = (293.8, 275.7) = 11 13 49.87 9 35 10.8
  Extent = 5.1 (5.0-5.3)", rotation angle = 0
  Source counts = 4620.6 +/- 78.0
  Background counts = 1461.6
  Rate = 0.3 +/- 0.005
[Thu Dec 29 16:17:55 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 16:17:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 16:17:55 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 16:17:55 2011] Source does appear to be extended
[Thu Dec 29 16:17:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 19:59:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 29 19:59:34 2011] Initial guess for spatial extent in simple fitting = 5.14"
[Thu Dec 29 19:59:34 2011] source mask rpix=1.2, npix_max = 11, mask sum = 11, frac = 0.974
[Thu Dec 29 19:59:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.14"
[Thu Dec 29 20:53:39 2011] fullrun_mos2_xmm0601780201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec 29 20:53:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780201_pi300-10000_cl_pass1_src1.csv
[Thu Dec 29 20:53:39 2011] fullrun_mos2_xmm0601780201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec 29 20:53:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780201_pi300-10000_cl_pass1_src1.csv
[Thu Dec 29 20:53:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 20:53:39 2011] fullrun_mos2_xmm0601780201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec 29 20:53:39 2011] fullrun_mos2_xmm0601780201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec 29 20:53:39 2011] Fit fullrun_mos2_xmm0601780201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec 29 20:54:11 2011] Spatial fit model total counts = 6035.010000, observed total counts = 6035.000000
[Thu Dec 29 20:54:11 2011] Offset between fit and detection position for source 1 = 0.000177 pixels
[Thu Dec 29 20:54:11 2011] 6082.020000 total counts/ 1457.250000 bgd. counts: snr = 121.149913
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000177 pixels
  Position = (293.8, 275.7) = 11 13 49.87 9 35 10.8
  Extent = 5.1 (5.0-5.3)", rotation angle = 0
  Source counts = 4624.8 +/- 78.0
  Background counts = 1457.2
  Rate = 0.3 +/- 0.005
[Thu Dec 29 20:54:11 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 20:54:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 20:54:11 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 20:54:11 2011] Source does appear to be extended
[Thu Dec 29 20:54:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 23:30:33 2011] Counts = 4624.770000, rescaling region sizes by 2.000000
[Thu Dec 29 23:30:33 2011] XMMSAS src. selection expression = ellipse(25514.528120, 23934.662000, 617.848818, 617.848818, 0.000000, X, Y)
[Thu Dec 29 23:30:33 2011] Writing source region out to fullrun_mos2_xmm0601780201_pi300-10000_pass1_cl_src1_src.reg
[Thu Dec 29 23:30:33 2011] Extracting stamp from image fullrun_mos2_xmm0601780201_pi300-10000_cl_sm2.00.img.gz, (258, 240) - (329, 311)
[Thu Dec 29 23:30:33 2011] XMMSAS bgd. selection expression = annulus(25514.528120, 23934.662000, 2059.496059, 4118.992119, X, Y) && !ellipse(21678.601400, 24076.996000, 380.833611, 380.833611, 0.000000, X, Y)
[Thu Dec 29 23:30:33 2011] Writing fullrun_mos2_xmm0601780201_pi300-10000_pass1_cl_src1.gif
[Thu Dec 29 23:30:37 2011] Mean detx,y = (88.68, 61.86) 
[Thu Dec 29 23:30:39 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 23:31:08 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 23:31:09 2011] Setting source spectrum file to fullrun_mos2_xmm0601780201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 29 23:31:09 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601780201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Dec 29 23:48:13 2011] Updating aperture counts using extracted products
[Thu Dec 29 23:48:13 2011] Error reading totcts from fullrun_mos2_xmm0601780201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 29 23:48:14 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 23:48:14 2011] Using photon index=1.80, rate=0.312, arf fullrun_mos2_xmm0601780201_pi300-10000_pass1_cl_src1.arf
[Thu Dec 29 23:48:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 23:48:14 2011] Updating source flux to 3.5e-12
[Thu Dec 29 23:48:58 2011] Reading fit data from xmm0601780201/analysis//spectral/fullrun_mos2_xmm0601780201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Dec 29 23:48:58 2011] Spectral fit parameter nH value = 1.14301e+20
[Thu Dec 29 23:48:58 2011] Spectral fit parameter PhoIndex value = 1.73282
[Thu Dec 29 23:48:58 2011] Failed to get F(0.3-8.0) from xmm0601780201/analysis//spectral/fullrun_mos2_xmm0601780201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Dec 29 23:48:58 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 23:48:58 2011] Using Nh = 1.1e+20, photon index=1.73, rate=0.312, arf fullrun_mos2_xmm0601780201_pi300-10000_pass1_cl_src1.arf
[Thu Dec 29 23:48:58 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 23:48:58 2011] Updating source flux to 3.7e-12