[Thu May 24 10:12:07 2012] Detection parameters:
  Position = (294.4, 385.0) = 11 9 44.22 -3 34 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.3 +/- 7.9
  Background counts = 3.3
  Rate = 0.007 +/- 0.002

[Thu May 24 10:12:07 2012] Off-axis axis estimate = 6.28'
[Thu May 24 10:31:20 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Thu May 24 10:31:20 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Thu May 24 10:31:20 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.029
[Thu May 24 10:31:20 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.57"
[Thu May 24 10:43:45 2012] fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 24 10:43:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_src4.csv
[Thu May 24 10:43:45 2012] fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 24 10:43:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_src4.csv
[Thu May 24 10:43:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 10:43:45 2012] fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 24 10:43:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 24 10:43:45 2012] fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 24 10:43:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 24 10:43:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 10:43:52 2012] Spatial fit model total counts = 61.315700, observed total counts = 54.000000
[Thu May 24 10:43:52 2012] Offset between fit and detection position for source 2 = 0.323373 pixels
[Thu May 24 10:43:52 2012] 61.193200 total counts/ 13.386200 bgd. counts: snr = 13.066607
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.323373 pixels
  Position = (294.1, 384.9) = 11 9 44.31 -3 34 54.1
  Extent = 14.3 (6.9-19.1)" x 7.5 (5.6-10.4)", rotation angle = 310 (235-0) degrees
  Source counts = 47.8 +/- 7.8
  Background counts = 13.4
  Rate = 0.007 +/- 0.001
[Thu May 24 10:43:52 2012] Vigneting correction estimate = 1.000000
[Thu May 24 10:43:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 10:43:52 2012] Assessing source extent using major axis lower bound
[Thu May 24 10:43:52 2012] Source does appear to be extended
[Thu May 24 10:43:52 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.66
[Thu May 24 11:02:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 11:02:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 11:02:52 2012] Initial guess for spatial extent in simple fitting = 10.90"
[Thu May 24 11:02:52 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.996
[Thu May 24 11:02:52 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.90"
[Thu May 24 11:14:57 2012] fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_src4.ximg exists
[Thu May 24 11:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_src4.csv
[Thu May 24 11:14:57 2012] fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu May 24 11:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_src4.csv
[Thu May 24 11:14:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 11:14:57 2012] fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu May 24 11:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 24 11:14:57 2012] fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu May 24 11:14:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 24 11:14:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 11:15:04 2012] Spatial fit model total counts = 61.043800, observed total counts = 54.000000
[Thu May 24 11:15:04 2012] Offset between fit and detection position for source 2 = 0.086641 pixels
[Thu May 24 11:15:04 2012] 60.763900 total counts/ 11.695900 bgd. counts: snr = 14.347675
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.086641 pixels
  Position = (294.1, 385.0) = 11 9 44.30 -3 34 53.8
  Extent = 14.7 (7.6-21.8)" x 7.8 (4.6-10.9)", rotation angle = 310 (283-337) degrees
  Source counts = 49.1 +/- 7.8
  Background counts = 11.7
  Rate = 0.007 +/- 0.001
[Thu May 24 11:15:04 2012] Vigneting correction estimate = 1.000000
[Thu May 24 11:15:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 11:15:04 2012] Assessing source extent using major axis lower bound
[Thu May 24 11:15:04 2012] Source does appear to be extended
[Thu May 24 11:15:04 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.70
[Thu May 24 11:33:54 2012] XMMSAS src. selection expression = ellipse(25539.278380, 33443.382600, 882.684025, 465.702013, 309.721829, X, Y)
[Thu May 24 11:33:54 2012] Writing source region out to fullrun_mos2_xmm0601780101_pi300-10000_pass1_cl_src2_src.reg
[Thu May 24 11:33:54 2012] Extracting stamp from image fullrun_mos2_xmm0601780101_pi300-10000_cl_sm2.00.img.gz, (243, 334) - (345, 436)
[Thu May 24 11:33:54 2012] XMMSAS bgd. selection expression = annulus(25539.278380, 33443.382600, 1471.140042, 2942.280085, X, Y) && !ellipse(28154.291700, 33369.671400, 464.419213, 464.419213, 0.000000, X, Y)
[Thu May 24 11:33:54 2012] Writing fullrun_mos2_xmm0601780101_pi300-10000_pass1_cl_src2.gif
[Thu May 24 11:38:05 2012] Mean detx,y = (-1077.20, 5549.86) 
[Thu May 24 11:38:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 11:38:39 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 11:38:39 2012] Setting source spectrum file to fullrun_mos2_xmm0601780101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 11:38:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601780101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 24 11:39:32 2012] Not generating rmf since there are only 49 counts
[Thu May 24 11:39:32 2012] rmf not generated due to insufficient counts
[Thu May 24 11:40:04 2012] Updating aperture counts using extracted products
[Thu May 24 11:40:04 2012] Error reading totcts from fullrun_mos2_xmm0601780101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 11:40:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 11:40:04 2012] Using photon index=1.80, rate=0.00708, arf fullrun_mos2_xmm0601780101_pi300-10000_pass1_cl_src2.arf
[Thu May 24 11:40:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 11:40:05 2012] Updating source flux to 1e-13
[Thu May 24 11:40:24 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 24 11:40:25 2012] xmm0601780101/analysis//spectral/fullrun_mos2_xmm0601780101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete