[Thu May 24 10:11:32 2012] Detection parameters:
  Position = (491.1, 271.8) = 11 8 47.04 -3 43 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.2 +/- 7.3
  Background counts = 2.7
  Rate = 0.005 +/- 0.001

[Thu May 24 10:11:32 2012] Off-axis axis estimate = 14.10'
[Thu May 24 10:18:53 2012] Using EEF radius (= 13.48 ")to estimate initial spatial extent for simple fitting
[Thu May 24 10:18:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 10:18:53 2012] Initial guess for spatial extent in simple fitting = 13.48"
[Thu May 24 10:18:53 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.946
[Thu May 24 10:18:53 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.48"
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 24 10:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src5.csv
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 24 10:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src5.csv
[Thu May 24 10:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 24 10:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 24 10:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 24 10:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 10:43:50 2012] Spatial fit model total counts = 60.749400, observed total counts = 54.000000
[Thu May 24 10:43:50 2012] Offset between fit and detection position for source 6 = 0.291715 pixels
[Thu May 24 10:43:50 2012] 60.376700 total counts/ 39.831800 bgd. counts: snr = 3.255285
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.291715 pixels
  Position = (490.8, 271.8) = 11 8 47.13 -3 43 5.9
  Extent = 5.2" x 3.0", rotation angle = 83
  Source counts = 20.5 +/- 7.8
  Background counts = 39.8
  Rate = 0.003 +/- 0.001
[Thu May 24 10:43:50 2012] Vigneting correction estimate = 1.000000
[Thu May 24 10:43:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 10:43:50 2012] Assessing source extent using major
[Thu May 24 10:43:50 2012] Source does appear to be extended
[Thu May 24 10:43:50 2012] Computing asymmetry using major and minor axis, asym = 1.74
[Thu May 24 10:43:50 2012] Source is asymmetric
[Thu May 24 10:47:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 10:47:39 2012] Initial guess for spatial extent in simple fitting = 4.13"
[Thu May 24 10:47:39 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.072
[Thu May 24 10:47:39 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.13"
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 24 11:02:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src5.csv
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 24 11:02:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src5.csv
[Thu May 24 11:02:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 24 11:02:52 2012] Fit fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu May 24 11:15:02 2012] Spatial fit model total counts = 54.884900, observed total counts = 49.000000
[Thu May 24 11:15:02 2012] Offset between fit and detection position for source 6 = 0.128325 pixels
[Thu May 24 11:15:02 2012] 54.474500 total counts/ 28.451800 bgd. counts: snr = 4.878625
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.128325 pixels
  Position = (491.0, 271.9) = 11 8 47.09 -3 43 5.7
  Extent = 7.2" x 2.9", rotation angle = 66
  Source counts = 26.0 +/- 7.4
  Background counts = 28.5
  Rate = 0.004 +/- 0.001
[Thu May 24 11:15:02 2012] Vigneting correction estimate = 1.000000
[Thu May 24 11:15:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 11:15:02 2012] Assessing source extent using major
[Thu May 24 11:15:02 2012] Source does appear to be extended
[Thu May 24 11:15:02 2012] Computing asymmetry using major and minor axis, asym = 2.47
[Thu May 24 11:15:02 2012] Source is asymmetric
[Thu May 24 11:24:23 2012] XMMSAS src. selection expression = ellipse(42664.424656, 23604.012478, 431.638368, 174.928698, 65.616814, X, Y)
[Thu May 24 11:24:23 2012] Writing source region out to fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src6_src.reg
[Thu May 24 11:24:23 2012] Extracting stamp from image fullrun_mos1_xmm0601780101_pi300-10000_cl_sm2.00.img.gz, (466, 247) - (516, 297)
[Thu May 24 11:24:23 2012] XMMSAS bgd. selection expression = annulus(42664.424656, 23604.012478, 719.397280, 1438.794560, X, Y)
[Thu May 24 11:24:23 2012] Writing fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src6.gif
[Thu May 24 11:26:01 2012] Mean detx,y = (-9512.00, 13457.87) 
[Thu May 24 11:26:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 11:26:23 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 11:26:23 2012] Setting source spectrum file to fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 24 11:26:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May 24 11:33:43 2012] Not generating rmf since there are only 26 counts
[Thu May 24 11:33:43 2012] rmf not generated due to insufficient counts
[Thu May 24 11:40:03 2012] Updating aperture counts using extracted products
[Thu May 24 11:40:03 2012] Error reading totcts from fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 24 11:40:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 11:40:04 2012] Using photon index=1.80, rate=0.00376, arf fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src6.arf
[Thu May 24 11:40:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 11:40:04 2012] Updating source flux to 1.7e-13
[Thu May 24 11:40:05 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting