[Thu May 24 10:11:32 2012] Detection parameters:
  Position = (288.0, 433.1) = 11 9 46.08 -3 31 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.7 +/- 7.6
  Background counts = 3.4
  Rate = 0.008 +/- 0.002

[Thu May 24 10:11:32 2012] Off-axis axis estimate = 9.79'
[Thu May 24 10:18:53 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Thu May 24 10:18:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 10:18:53 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Thu May 24 10:18:53 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Thu May 24 10:18:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.32"
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 24 10:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src3.csv
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 24 10:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src3.csv
[Thu May 24 10:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 24 10:31:20 2012] Fit fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 24 10:43:50 2012] Spatial fit model total counts = 58.695900, observed total counts = 60.000000
[Thu May 24 10:43:50 2012] Offset between fit and detection position for source 2 = 0.395446 pixels
[Thu May 24 10:43:50 2012] 60.345700 total counts/ 35.312600 bgd. counts: snr = 4.212596
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.395446 pixels
  Position = (287.6, 433.2) = 11 9 46.19 -3 31 23.8
  Extent = 7.2 (5.1-11.7)", rotation angle = 0
  Source counts = 25.0 +/- 7.8
  Background counts = 35.3
  Rate = 0.004 +/- 0.001
[Thu May 24 10:43:50 2012] Vigneting correction estimate = 1.000000
[Thu May 24 10:43:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 10:43:50 2012] Assessing source extent using major axis lower bound
[Thu May 24 10:43:50 2012] Source does appear to be extended
[Thu May 24 10:43:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 10:47:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 10:47:39 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Thu May 24 10:47:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.067
[Thu May 24 10:47:39 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.24"
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 24 11:02:52 2012] Fit fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 24 11:02:52 2012] Fit fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May 24 11:15:02 2012] Spatial fit model total counts = 50.564800, observed total counts = 52.000000
[Thu May 24 11:15:02 2012] Offset between fit and detection position for source 2 = 0.158136 pixels
[Thu May 24 11:15:02 2012] 51.326800 total counts/ 16.283900 bgd. counts: snr = 8.684020
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.158136 pixels
  Position = (287.4, 433.3) = 11 9 46.24 -3 31 23.7
  Extent = 12.5 (6.2-24.9)" x 7.5 (5.1-11.6)", rotation angle = 63 (90-90) degrees
  Source counts = 35.0 +/- 7.2
  Background counts = 16.3
  Rate = 0.005 +/- 0.001
[Thu May 24 11:15:02 2012] Vigneting correction estimate = 1.000000
[Thu May 24 11:15:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 11:15:02 2012] Assessing source extent using major axis lower bound
[Thu May 24 11:15:02 2012] Source does appear to be extended
[Thu May 24 11:15:02 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.54
[Thu May 24 11:24:23 2012] XMMSAS src. selection expression = ellipse(24957.773200, 37646.335200, 747.468022, 448.849813, 62.736600, X, Y)
[Thu May 24 11:24:23 2012] Writing source region out to fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src2_src.reg
[Thu May 24 11:24:23 2012] Extracting stamp from image fullrun_mos1_xmm0601780101_pi300-10000_cl_sm2.00.img.gz, (244, 390) - (330, 476)
[Thu May 24 11:24:23 2012] XMMSAS bgd. selection expression = annulus(24957.773200, 37646.335200, 1245.780036, 2491.560072, X, Y)
[Thu May 24 11:24:23 2012] Writing fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src2.gif
[Thu May 24 11:25:25 2012] Mean detx,y = (9879.29, 1885.37) 
[Thu May 24 11:25:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 11:25:38 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 11:25:38 2012] Setting source spectrum file to fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 11:25:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 24 11:33:30 2012] Not generating rmf since there are only 35 counts
[Thu May 24 11:33:30 2012] rmf not generated due to insufficient counts
[Thu May 24 11:40:03 2012] Updating aperture counts using extracted products
[Thu May 24 11:40:03 2012] Error reading totcts from fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 11:40:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 11:40:04 2012] Using photon index=1.80, rate=0.00507, arf fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src2.arf
[Thu May 24 11:40:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 11:40:04 2012] Updating source flux to 8.3e-14
[Thu May 24 11:40:05 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting