[Thu May 24 10:11:32 2012] Detection parameters:
  Position = (303.2, 322.1) = 11 9 41.66 -3 39 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2288.6 +/- 57.2
  Background counts = 3.7
  Rate = 0.3 +/- 0.008

[Thu May 24 10:11:32 2012] Off-axis axis estimate = 1.75'
[Thu May 24 10:18:53 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Thu May 24 10:18:53 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Thu May 24 10:18:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Thu May 24 10:18:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 24 10:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src1.csv
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 24 10:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src1.csv
[Thu May 24 10:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 24 10:31:20 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 24 10:31:20 2012] Fit fullrun_mos1_xmm0601780101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 24 10:43:50 2012] Spatial fit model total counts = 2037.000000, observed total counts = 2037.000000
[Thu May 24 10:43:50 2012] Offset between fit and detection position for source 1 = 0.199954 pixels
[Thu May 24 10:43:50 2012] 2042.412000 total counts/ 467.602000 bgd. counts: snr = 72.826591
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.199954 pixels
  Position = (303.0, 322.2) = 11 9 41.72 -3 39 26.8
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 1574.8 +/- 45.2
  Background counts = 467.6
  Rate = 0.2 +/- 0.007
[Thu May 24 10:43:50 2012] Vigneting correction estimate = 1.000000
[Thu May 24 10:43:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 10:43:50 2012] Assessing source extent using major axis lower bound
[Thu May 24 10:43:50 2012] Source does appear to be extended
[Thu May 24 10:43:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 10:47:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 10:47:39 2012] Initial guess for spatial extent in simple fitting = 5.48"
[Thu May 24 10:47:39 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.292
[Thu May 24 10:47:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.48"
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 24 11:02:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src1.csv
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 24 11:02:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src1.csv
[Thu May 24 11:02:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 24 11:02:52 2012] fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 24 11:02:52 2012] Fit fullrun_mos1_xmm0601780101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 24 11:15:02 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Thu May 24 11:15:02 2012] Vigneting correction estimate = 1.000000
[Thu May 24 11:15:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 11:15:02 2012] Assessing source extent using major axis lower bound
[Thu May 24 11:15:02 2012] Source does appear to be extended
[Thu May 24 11:15:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 11:24:23 2012] Counts = 1574.810000, rescaling region sizes by 2.000000
[Thu May 24 11:24:23 2012] XMMSAS src. selection expression = ellipse(26311.884724, 27984.295400, 657.587240, 657.587240, 0.000000, X, Y)
[Thu May 24 11:24:23 2012] Writing source region out to fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src1_src.reg
[Thu May 24 11:24:23 2012] Extracting stamp from image fullrun_mos1_xmm0601780101_pi300-10000_cl_sm2.00.img.gz, (265, 284) - (341, 360)
[Thu May 24 11:24:23 2012] XMMSAS bgd. selection expression = annulus(26311.884724, 27984.295400, 2191.957465, 4383.914930, X, Y) && !ellipse(30967.141000, 28212.354400, 501.047214, 501.047214, 0.000000, X, Y)
[Thu May 24 11:24:23 2012] Writing fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src1.gif
[Thu May 24 11:24:26 2012] Mean detx,y = (389.52, -259.91) 
[Thu May 24 11:24:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 11:24:48 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 11:24:48 2012] Setting source spectrum file to fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 11:24:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 24 11:40:03 2012] Updating aperture counts using extracted products
[Thu May 24 11:40:03 2012] Error reading totcts from fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 11:40:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 11:40:04 2012] Using photon index=1.80, rate=0.228, arf fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src1.arf
[Thu May 24 11:40:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 11:40:04 2012] Updating source flux to 2.3e-12
[Thu May 24 11:40:24 2012] Reading fit data from xmm0601780101/analysis//spectral/fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 24 11:40:24 2012] Spectral fit parameter nH value = 3.03808e+14
[Thu May 24 11:40:24 2012] Spectral fit parameter PhoIndex value = 1.9226
[Thu May 24 11:40:24 2012] Failed to get F(0.3-8.0) from xmm0601780101/analysis//spectral/fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 24 11:40:24 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 11:40:24 2012] Using Nh = 3e+14, photon index=1.92, rate=0.228, arf fullrun_mos1_xmm0601780101_pi300-10000_pass1_cl_src1.arf
[Thu May 24 11:40:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 11:40:24 2012] Updating source flux to 2.1e-12