[Sat Sep  1 22:00:13 2012] Detection parameters:
  Position = (292.4, 323.3) = 21 27 56.46 56 57 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.8 +/- 16.3
  Background counts = 54.0
  Rate = 0.004 +/- 0.0009

[Sat Sep  1 22:00:13 2012] Off-axis axis estimate = 1.86'
[Sat Sep  1 22:59:42 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 22:59:42 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sat Sep  1 22:59:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.937
[Sat Sep  1 22:59:42 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.36"
[Sat Sep  1 23:33:08 2012] fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_src7.ximg exists
[Sat Sep  1 23:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_src7.csv
[Sat Sep  1 23:33:08 2012] fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Sep  1 23:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_src7.csv
[Sat Sep  1 23:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 23:33:08 2012] fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Sep  1 23:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Sep  1 23:33:08 2012] fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Sep  1 23:33:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Sep  1 23:33:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601741901_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 23:33:14 2012] Source 8 is offset by -7.600764 and 5.514142 pixels which is larger than
2 X fitted extent = 3.229917 x 3.229917, not incorporating fit results
[Sat Sep  1 23:33:14 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 23:33:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 23:33:14 2012] Assessing source extent using major
[Sat Sep  1 23:33:14 2012] Source does appear to be extended
[Sat Sep  1 23:33:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 23:33:14 2012] Deleting source due to low Poisson probability 0.9