[Sat Sep  1 22:00:13 2012] Detection parameters:
  Position = (321.9, 309.1) = 21 27 40.76 56 55 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 293.2 +/- 28.3
  Background counts = 55.8
  Rate = 0.01 +/- 0.001

[Sat Sep  1 22:00:13 2012] Off-axis axis estimate = 1.87'
[Sat Sep  1 22:59:42 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 22:59:42 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sat Sep  1 22:59:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 8, frac = 0.416
[Sat Sep  1 22:59:42 2012] Skipping simple spatial due to low active detector fraction
[Sat Sep  1 23:33:14 2012] Spatial fit model total counts = 738.858000, observed total counts = 739.000000
[Sat Sep  1 23:33:14 2012] Offset between fit and detection position for source 4 = 5.244654 pixels
[Sat Sep  1 23:33:14 2012] Warning, changing simple spatial fit ID from -1 to 10
[Sat Sep  1 23:33:14 2012] 719.476000 total counts/ 545.908000 bgd. counts: snr = 7.428651
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 5.244654 pixels
  Position = (325.9, 305.7) = 21 27 38.65 56 55 43.2
  Extent = 15.4 (15.4-30.8)", rotation angle = 0
  Source counts = 173.6 +/- 26.8
  Background counts = 545.9
  Rate = 0.01 +/- 0.001
[Sat Sep  1 23:33:14 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 23:33:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 23:33:14 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 23:33:14 2012] Source does appear to be extended
[Sat Sep  1 23:33:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 23:33:14 2012] Source is confused with source 3
[Sat Sep  1 23:33:14 2012] Source is confused with source 5
[Sun Sep  2 00:16:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep  2 00:16:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep  2 00:16:36 2012] Initial guess for spatial extent in simple fitting = 15.39"
[Sun Sep  2 00:16:36 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.981
[Sun Sep  2 00:16:36 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 15.39"
[Sun Sep  2 01:00:26 2012] fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_src2.ximg exists
[Sun Sep  2 01:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_src2.csv
[Sun Sep  2 01:00:26 2012] fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Sep  2 01:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_src2.csv
[Sun Sep  2 01:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 01:00:26 2012] fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Sep  2 01:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Sep  2 01:00:26 2012] fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Sep  2 01:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Sep  2 01:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601741901_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 01:00:34 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Sun Sep  2 01:00:34 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 01:00:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 01:00:34 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 01:00:34 2012] Source does appear to be extended
[Sun Sep  2 01:00:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 01:19:46 2012] XMMSAS src. selection expression = ellipse(28306.748000, 26548.690000, 923.628027, 923.628027, 0.000000, X, Y)
[Sun Sep  2 01:19:46 2012] Writing source region out to fullrun_mos2_xmm0601741901_pi300-10000_pass1_cl_src4_src.reg
[Sun Sep  2 01:19:46 2012] Extracting stamp from image fullrun_mos2_xmm0601741901_pi300-10000_cl_sm2.00.img.gz, (273, 253) - (379, 359)
[Sun Sep  2 01:19:46 2012] XMMSAS bgd. selection expression = annulus(28306.748000, 26548.690000, 1539.380044, 3078.760089, X, Y) && !ellipse(27176.990800, 27570.634800, 1691.656849, 1505.568043, 0.000000, X, Y) && !ellipse(28250.804138, 27340.041473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28219.246460, 28136.539642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27880.172668, 26230.664032, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep  2 01:19:46 2012] Writing fullrun_mos2_xmm0601741901_pi300-10000_pass1_cl_src4.gif
[Sun Sep  2 01:23:01 2012] Mean detx,y = (-925.10, -611.55) 
[Sun Sep  2 01:23:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 01:23:08 2012] grppha failed
[Sun Sep  2 01:23:08 2012] Setting source spectrum file to fullrun_mos2_xmm0601741901_pi300-10000_pass1_cl_src4_src.pi.gz
[Sun Sep  2 01:23:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601741901_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Sep  2 01:24:15 2012] Updating aperture counts using extracted products
[Sun Sep  2 01:24:15 2012] Error reading totcts from fullrun_mos2_xmm0601741901_pi300-10000_pass1_cl_src4_src.pi.gz
[Sun Sep  2 01:24:15 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 01:24:17 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Sun Sep  2 01:24:17 2012] Source 4 has no response, skipping
[Sun Sep  2 01:24:18 2012] xmm0601741901/analysis//spectral/fullrun_mos2_xmm0601741901_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete