[Sat May 19 20:00:37 2012] Detection parameters:
  Position = (364.8, 352.8) = 16 55 57.62 -32 59 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 363.7 +/- 23.6
  Background counts = 12.5
  Rate = 0.02 +/- 0.001

[Sat May 19 20:00:37 2012] Off-axis axis estimate = 6.22'
[Sat May 19 21:12:38 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Sat May 19 21:12:38 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Sat May 19 21:12:38 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.241
[Sat May 19 21:12:38 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.54"
[Sat May 19 21:38:43 2012] fullrun_mos2_xmm0601741401_pi300-10000_cl_pass0_src2.ximg exists
[Sat May 19 21:38:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741401_pi300-10000_cl_pass0_src2.csv
[Sat May 19 21:38:43 2012] fullrun_mos2_xmm0601741401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat May 19 21:38:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741401_pi300-10000_cl_pass0_src2.csv
[Sat May 19 21:38:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601741401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601741401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 21:38:43 2012] fullrun_mos2_xmm0601741401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat May 19 21:38:43 2012] fullrun_mos2_xmm0601741401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 19 21:38:43 2012] Fit fullrun_mos2_xmm0601741401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat May 19 21:38:56 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.364354 pixels away
[Sat May 19 21:38:57 2012] Vigneting correction estimate = 1.000000
[Sat May 19 21:38:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 21:38:57 2012] Assessing source extent using major
[Sat May 19 21:38:57 2012] Source does appear to be extended
[Sat May 19 21:38:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 22:41:53 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Sat May 19 22:41:53 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Sat May 19 22:41:53 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.241
[Sat May 19 22:41:53 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.54"
[Sat May 19 23:06:53 2012] fullrun_mos2_xmm0601741401_pi300-10000_cl_pass1_src2.ximg exists
[Sat May 19 23:06:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741401_pi300-10000_cl_pass1_src2.csv
[Sat May 19 23:06:53 2012] fullrun_mos2_xmm0601741401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat May 19 23:06:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741401_pi300-10000_cl_pass1_src2.csv
[Sat May 19 23:06:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601741401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601741401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 23:06:54 2012] fullrun_mos2_xmm0601741401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat May 19 23:06:54 2012] fullrun_mos2_xmm0601741401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 19 23:06:54 2012] Fit fullrun_mos2_xmm0601741401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat May 19 23:07:07 2012] Spatial fit model total counts = 448.000000, observed total counts = 448.000000
[Sat May 19 23:07:07 2012] Offset between fit and detection position for source 3 = 0.201830 pixels
[Sat May 19 23:07:07 2012] 447.353000 total counts/ 228.817000 bgd. counts: snr = 14.447039
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.201830 pixels
  Position = (364.7, 352.8) = 16 55 57.68 -32 59 45.7
  Extent = 3.8 (3.2-4.3)", rotation angle = 0
  Source counts = 218.5 +/- 21.2
  Background counts = 228.8
  Rate = 0.01 +/- 0.0009
[Sat May 19 23:07:07 2012] Vigneting correction estimate = 1.000000
[Sat May 19 23:07:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 23:07:07 2012] Assessing source extent using major axis lower bound
[Sat May 19 23:07:07 2012] Source does appear to be extended
[Sat May 19 23:07:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 00:20:27 2012] XMMSAS src. selection expression = ellipse(31676.287800, 30643.199000, 227.456407, 227.456407, 0.000000, X, Y)
[Sun May 20 00:20:27 2012] Writing source region out to fullrun_mos2_xmm0601741401_pi300-10000_pass1_cl_src3_src.reg
[Sun May 20 00:20:27 2012] Extracting stamp from image fullrun_mos2_xmm0601741401_pi300-10000_cl_sm2.00.img.gz, (352, 340) - (378, 366)
[Sun May 20 00:20:27 2012] XMMSAS bgd. selection expression = annulus(31676.287800, 30643.199000, 379.094011, 758.188022, X, Y)
[Sun May 20 00:20:27 2012] Writing fullrun_mos2_xmm0601741401_pi300-10000_pass1_cl_src3.gif
[Sun May 20 00:20:48 2012] Mean detx,y = (-5061.86, 2414.93) 
[Sun May 20 00:20:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 00:20:55 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 00:20:55 2012] Setting source spectrum file to fullrun_mos2_xmm0601741401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 20 00:20:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601741401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 20 00:34:10 2012] Updating aperture counts using extracted products
[Sun May 20 00:34:10 2012] Error reading totcts from fullrun_mos2_xmm0601741401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 20 00:34:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 00:34:10 2012] Using photon index=1.80, rate=0.0098, arf fullrun_mos2_xmm0601741401_pi300-10000_pass1_cl_src3.arf
[Sun May 20 00:34:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 00:34:10 2012] Updating source flux to 1.8e-13