[Sun Mar 11 17:24:24 2012] Detection parameters: Position = (285.1, 303.9) = 16 38 32.00 -20 53 29.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 124.1 +/- 18.6 Background counts = 49.2 Rate = 0.007 +/- 0.001 [Sun Mar 11 17:24:25 2012] Off-axis axis estimate = 1.05' [Sun Mar 11 17:27:45 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting [Sun Mar 11 17:27:45 2012] Initial guess for spatial extent in simple fitting = 6.95" [Sun Mar 11 17:27:45 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.909 [Sun Mar 11 17:27:45 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 6.95" [Sun Mar 11 19:02:46 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src31.ximg exists [Sun Mar 11 19:02:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src31.csv [Sun Mar 11 19:02:46 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src31_1.ximg exists [Sun Mar 11 19:02:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src31.csv [Sun Mar 11 19:02:46 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src31_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Mar 11 19:02:47 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists [Sun Mar 11 19:02:47 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists [Sun Mar 11 19:02:47 2012] Fit fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly [Sun Mar 11 20:07:57 2012] Source 31 is offset by -5.873739 and -2.997397 pixels which is larger than 2 X fitted extent = 0.796713 x 0.796713, not incorporating fit results [Sun Mar 11 20:07:57 2012] Spatial fit model total counts = 1055.560000, observed total counts = 1055.000000 [Sun Mar 11 20:07:57 2012] Offset between fit and detection position for source 31 = 4.880400 pixels [Sun Mar 11 20:07:57 2012] 1022.800000 total counts/ 800.203000 bgd. counts: snr = 7.868994 Spatial fit parameters: Offset between fit and detection position for source 31 = 4.880400 pixels Position = (283.5, 308.5) = 16 38 32.50 -20 53 9.2 Extent = 13.9 (13.5-27.8)", rotation angle = 0 Source counts = 222.6 +/- 32.0 Background counts = 800.2 Rate = 0.01 +/- 0.001 [Sun Mar 11 20:07:57 2012] Vigneting correction estimate = 1.000000 [Sun Mar 11 20:07:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Mar 11 20:07:57 2012] Assessing source extent using major axis lower bound [Sun Mar 11 20:07:57 2012] Source does appear to be extended [Sun Mar 11 20:07:57 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Mar 11 20:07:57 2012] Source is confused with source 30 [Sun Mar 11 20:08:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Mar 11 20:08:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Mar 11 20:08:19 2012] Initial guess for spatial extent in simple fitting = 13.90" [Sun Mar 11 20:08:19 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.897 [Sun Mar 11 20:08:19 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 13.90" [Sun Mar 11 21:53:50 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src31.ximg exists [Sun Mar 11 21:53:50 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src31_1.ximg exists [Sun Mar 11 21:53:50 2012] Fit fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src31 appears to have run properly [Sun Mar 11 21:53:51 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists [Sun Mar 11 21:53:51 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists [Sun Mar 11 21:53:51 2012] Fit fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly [Sun Mar 11 22:26:35 2012] Spatial fit model total counts = 1352.870000, observed total counts = 1354.000000 [Sun Mar 11 22:26:35 2012] Offset between fit and detection position for source 31 = 6.768626 pixels [Sun Mar 11 22:26:35 2012] 1332.751000 total counts/ 582.267000 bgd. counts: snr = 31.101429 Spatial fit parameters: Offset between fit and detection position for source 31 = 6.768626 pixels Position = (285.3, 302.0) = 16 38 31.93 -20 53 37.6 Extent = 27.8 (27.8-27.8)", rotation angle = 0 Source counts = 750.5 +/- 36.5 Background counts = 582.3 Rate = 0.03 +/- 0.002 [Sun Mar 11 22:26:35 2012] Vigneting correction estimate = 1.000000 [Sun Mar 11 22:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Mar 11 22:26:35 2012] Assessing source extent using major axis lower bound [Sun Mar 11 22:26:35 2012] Source does appear to be extended [Sun Mar 11 22:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Mar 11 22:26:50 2012] XMMSAS src. selection expression = ellipse(24774.192000, 26228.258000, 1667.754048, 1667.754048, 0.000000, X, Y) [Sun Mar 11 22:26:50 2012] Writing source region out to fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src31_src.reg [Sun Mar 11 22:26:50 2012] Extracting stamp from image fullrun_pn_xmm0601741301_pi300-10000_cl_sm2.00.img.gz, (189, 206) - (381, 398) [Sun Mar 11 22:26:50 2012] XMMSAS bgd. selection expression = annulus(24774.192000, 26228.258000, 2779.590080, 5559.180160, X, Y) && !ellipse(25062.827400, 24083.050800, 1412.148041, 1412.148041, 0.000000, X, Y) && !ellipse(22395.474213, 25886.155396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25806.124540, 27134.445800, 381.891211, 381.891211, 0.000000, X, Y) && !ellipse(23784.947699, 32550.581340, 1465.744042, 379.491791, 79.698156, X, Y) && !ellipse(23906.356600, 31681.009200, 870.944025, 870.944025, 0.000000, X, Y) && !ellipse(23908.585812, 31356.582316, 1437.760041, 498.994127, 74.888568, X, Y) && !ellipse(24196.068400, 30300.410000, 1128.544032, 1128.544032, 0.000000, X, Y) && !ellipse(24186.785200, 29902.635600, 809.440023, 809.440023, 0.000000, X, Y) && !ellipse(24267.228800, 29475.768000, 1270.528037, 444.556813, 79.830400, X, Y) && !ellipse(24437.424000, 28461.796000, 699.396820, 699.396820, 0.000000, X, Y) && !ellipse(29324.453400, 28244.721400, 325.066409, 325.066409, 0.000000, X, Y) && !ellipse(24487.446136, 28062.273163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24612.085600, 27086.864600, 1488.568043, 350.701610, 260.747000, X, Y) && !ellipse(26918.964447, 23127.317108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24926.372925, 22741.411255, 870.000000, 870.000000, 0.000000, X, Y) [Sun Mar 11 22:26:50 2012] Writing fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src31.gif [Sun Mar 11 22:58:32 2012] Mean detx,y = (-18.07, 1520.94) [Sun Mar 11 22:58:37 2012] Setting backscal keywords in source and bgd. spectrum [Sun Mar 11 23:00:12 2012] Binned source spectrum to 10 counts/bin [Sun Mar 11 23:00:12 2012] Setting source spectrum file to fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Sun Mar 11 23:00:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src31_bgd.pi.gz [Mon Mar 12 01:12:51 2012] Updating aperture counts using extracted products [Mon Mar 12 01:12:51 2012] Error reading totcts from fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Mon Mar 12 01:12:54 2012] Calculating source flux in energy range 0.30-8.00 [Mon Mar 12 01:12:54 2012] Using photon index=1.80, rate=0.0328, arf fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src31.arf [Mon Mar 12 01:12:54 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Mar 12 01:12:54 2012] Updating source flux to 7.6e-14 [Mon Mar 12 01:13:33 2012] Flag b found in src. 31 procflags, skipping spectral fitting [Mon Mar 12 01:13:33 2012] Flag c found in src. 31 procflags, skipping spectral fitting