[Sun Mar 11 17:24:24 2012] Detection parameters:
  Position = (275.2, 365.1) = 16 38 35.06 -20 49 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.8 +/- 16.3
  Background counts = 40.0
  Rate = 0.008 +/- 0.001

[Sun Mar 11 17:24:25 2012] Off-axis axis estimate = 5.11'
[Sun Mar 11 17:27:45 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 17:27:45 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Sun Mar 11 17:27:45 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.139
[Sun Mar 11 17:27:45 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.99"
[Sun Mar 11 19:02:46 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src21.ximg exists
[Sun Mar 11 19:02:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src21.csv
[Sun Mar 11 19:02:46 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Mar 11 19:02:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src21.csv
[Sun Mar 11 19:02:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 19:02:47 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Mar 11 19:02:47 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Mar 11 19:02:47 2012] Fit fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun Mar 11 20:07:57 2012] Source 21 is offset by 8.470867 and 3.884988 pixels which is larger than
2 X fitted extent = 1.032874 x 1.032874, not incorporating fit results
[Sun Mar 11 20:07:57 2012] Source 21 is offset by -8.880535 and -4.039196 pixels which is larger than
2 X fitted extent = 8.093609 x 8.093609, not incorporating fit results
[Sun Mar 11 20:07:57 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 20:07:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 20:07:57 2012] Assessing source extent using major
[Sun Mar 11 20:07:57 2012] Source does appear to be extended
[Sun Mar 11 20:07:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 20:07:57 2012] Source is confused with source 20
[Sun Mar 11 20:07:57 2012] Source is confused with source 22
[Sun Mar 11 20:08:19 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 20:08:19 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Sun Mar 11 20:08:19 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.139
[Sun Mar 11 20:08:19 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.99"
[Sun Mar 11 21:53:50 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src21.ximg exists
[Sun Mar 11 21:53:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src21.csv
[Sun Mar 11 21:53:50 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Mar 11 21:53:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src21.csv
[Sun Mar 11 21:53:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 21:53:51 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Mar 11 21:53:51 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Mar 11 21:53:51 2012] Fit fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Mar 11 22:26:35 2012] Spatial fit model total counts = 723.953000, observed total counts = 725.000000
[Sun Mar 11 22:26:35 2012] Offset between fit and detection position for source 21 = 0.370974 pixels
[Sun Mar 11 22:26:35 2012] 618.776000 total counts/ 466.484000 bgd. counts: snr = 7.051130
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.370974 pixels
  Position = (275.3, 364.7) = 16 38 35.02 -20 49 4.9
  Extent = 10.9 (8.1-15.0)", rotation angle = 0
  Source counts = 152.3 +/- 24.9
  Background counts = 466.5
  Rate = 0.007 +/- 0.001
[Sun Mar 11 22:26:35 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 22:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 22:26:35 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 22:26:35 2012] Source does appear to be extended
[Sun Mar 11 22:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 22:26:50 2012] XMMSAS src. selection expression = ellipse(23906.356600, 31681.009200, 653.208019, 653.208019, 0.000000, X, Y)
[Sun Mar 11 22:26:50 2012] Writing source region out to fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src21_src.reg
[Sun Mar 11 22:26:50 2012] Extracting stamp from image fullrun_pn_xmm0601741301_pi300-10000_cl_sm2.00.img.gz, (238, 327) - (313, 402)
[Sun Mar 11 22:26:50 2012] XMMSAS bgd. selection expression = annulus(23906.356600, 31681.009200, 1088.680031, 2177.360063, X, Y) && !ellipse(23763.966000, 32616.657000, 532.444015, 532.444015, 0.000000, X, Y) && !ellipse(23542.264506, 34224.678409, 1599.528046, 429.914010, 79.000681, X, Y) && !ellipse(23616.387730, 33661.718000, 510.225615, 510.225615, 0.000000, X, Y) && !ellipse(23613.714800, 33581.290000, 823.808024, 823.808024, 0.000000, X, Y) && !ellipse(23784.947699, 32550.581340, 1465.744042, 379.491791, 79.698156, X, Y) && !ellipse(23908.585812, 31356.582316, 1437.760041, 498.994127, 74.888568, X, Y) && !ellipse(24196.068400, 30300.410000, 1128.544032, 1128.544032, 0.000000, X, Y) && !ellipse(24186.785200, 29902.635600, 809.440023, 809.440023, 0.000000, X, Y) && !ellipse(24267.228800, 29475.768000, 1270.528037, 444.556813, 79.830400, X, Y)
[Sun Mar 11 22:26:50 2012] Writing fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src21.gif
[Sun Mar 11 22:49:59 2012] Mean detx,y = (50.46, 7484.93) 
[Sun Mar 11 22:50:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 22:50:21 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 22:50:21 2012] Setting source spectrum file to fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Mar 11 22:50:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Mar 12 01:12:51 2012] Updating aperture counts using extracted products
[Mon Mar 12 01:12:51 2012] Error reading totcts from fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Mar 12 01:12:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 01:12:53 2012] Using photon index=1.80, rate=0.00666, arf fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src21.arf
[Mon Mar 12 01:12:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 01:12:53 2012] Updating source flux to 2.5e-14
[Mon Mar 12 01:13:33 2012] Flag b found in src. 21 procflags, skipping spectral fitting
[Mon Mar 12 01:13:33 2012] Flag c found in src. 21 procflags, skipping spectral fitting