[Sun Mar 11 17:24:23 2012] Detection parameters:
  Position = (265.9, 429.0) = 16 38 37.95 -20 44 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.0 +/- 15.0
  Background counts = 41.3
  Rate = 0.004 +/- 0.0007

[Sun Mar 11 17:24:25 2012] Off-axis axis estimate = 9.75'
[Sun Mar 11 17:27:45 2012] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 17:27:45 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Sun Mar 11 17:27:45 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.937
[Sun Mar 11 17:27:45 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 11.31"
[Sun Mar 11 19:02:46 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src12.ximg exists
[Sun Mar 11 19:02:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src12.csv
[Sun Mar 11 19:02:46 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Mar 11 19:02:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src12.csv
[Sun Mar 11 19:02:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 19:02:47 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Mar 11 19:02:47 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Mar 11 19:02:47 2012] Fit fullrun_pn_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Mar 11 20:07:57 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.020739 pixels away
[Sun Mar 11 20:07:57 2012] Warning, spatial fit 12 centroid is now closest to src. 9
[Sun Mar 11 20:07:57 2012] Source 12 is offset by -8.408973 and -1.714867 pixels which is larger than
2 X fitted extent = 1.350501 x 1.350501, not incorporating fit results
[Sun Mar 11 20:07:57 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 20:07:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 20:07:57 2012] Assessing source extent using major
[Sun Mar 11 20:07:57 2012] Source does appear to be extended
[Sun Mar 11 20:07:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 20:07:57 2012] Source is confused with source 8
[Sun Mar 11 20:08:19 2012] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 20:08:19 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Sun Mar 11 20:08:19 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.937
[Sun Mar 11 20:08:19 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 11.31"
[Sun Mar 11 21:53:50 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src12.ximg exists
[Sun Mar 11 21:53:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src12.csv
[Sun Mar 11 21:53:50 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Mar 11 21:53:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src12.csv
[Sun Mar 11 21:53:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 21:53:50 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Mar 11 21:53:50 2012] fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Mar 11 21:53:50 2012] Fit fullrun_pn_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Mar 11 22:26:35 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.029594 pixels away
[Sun Mar 11 22:26:35 2012] Warning, spatial fit 12 centroid is now closest to src. 9
[Sun Mar 11 22:26:35 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.310007 pixels away
[Sun Mar 11 22:26:35 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 22:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 22:26:35 2012] Assessing source extent using major
[Sun Mar 11 22:26:35 2012] Source does appear to be extended
[Sun Mar 11 22:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 22:26:49 2012] XMMSAS src. selection expression = ellipse(23084.369354, 37272.856537, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 11 22:26:49 2012] Writing source region out to fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src12_src.reg
[Sun Mar 11 22:26:49 2012] Extracting stamp from image fullrun_pn_xmm0601741301_pi300-10000_cl_sm2.00.img.gz, (228, 391) - (303, 466)
[Sun Mar 11 22:26:49 2012] XMMSAS bgd. selection expression = annulus(23084.369354, 37272.856537, 1087.500000, 2175.000000, X, Y) && !ellipse(23146.948395, 36857.341797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23278.527012, 35783.726000, 1020.448029, 800.821963, 90.000000, X, Y) && !ellipse(23056.988037, 37792.190887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23430.242676, 35179.506653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23542.264506, 34224.678409, 1599.528046, 429.914010, 79.000681, X, Y) && !ellipse(22913.042969, 38327.415588, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 22:26:49 2012] Writing fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src12.gif
[Sun Mar 11 22:39:05 2012] Mean detx,y = (61.93, 13116.70) 
[Sun Mar 11 22:39:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 22:39:43 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 22:39:44 2012] Setting source spectrum file to fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Mar 11 22:39:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Mar 11 23:50:28 2012] Not generating rmf since there are only 82 counts
[Sun Mar 11 23:50:28 2012] rmf not generated due to insufficient counts
[Mon Mar 12 01:12:50 2012] Updating aperture counts using extracted products
[Mon Mar 12 01:12:50 2012] Error reading totcts from fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Mar 12 01:12:52 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 01:12:52 2012] Using photon index=1.80, rate=0.00363, arf fullrun_pn_xmm0601741301_pi300-10000_pass1_cl_src12.arf
[Mon Mar 12 01:12:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 01:12:52 2012] Updating source flux to 2.1e-14
[Mon Mar 12 01:13:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting