[Sun Mar 11 17:25:25 2012] Detection parameters:
  Position = (288.7, 277.3) = 16 38 30.87 -20 55 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20681.4 +/- 169.9
  Background counts = 16.8
  Rate = 0.9 +/- 0.007

[Sun Mar 11 17:25:25 2012] Off-axis axis estimate = 1.69'
[Sun Mar 11 19:26:25 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 19:26:25 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Sun Mar 11 19:26:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Sun Mar 11 19:26:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sun Mar 11 20:07:44 2012] fullrun_mos2_xmm0601741301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 11 20:07:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741301_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 20:07:44 2012] fullrun_mos2_xmm0601741301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 11 20:07:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741301_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 20:07:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601741301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601741301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 20:07:44 2012] fullrun_mos2_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 11 20:07:44 2012] fullrun_mos2_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 11 20:07:44 2012] Fit fullrun_mos2_xmm0601741301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 11 20:08:05 2012] Spatial fit model total counts = 19264.700000, observed total counts = 18617.000000
[Sun Mar 11 20:08:05 2012] Offset between fit and detection position for source 1 = 0.206783 pixels
[Sun Mar 11 20:08:05 2012] 19192.210000 total counts/ 4831.710000 bgd. counts: snr = 206.594679
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.206783 pixels
  Position = (288.8, 277.5) = 16 38 30.85 -20 55 24.4
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 14360.5 +/- 138.5
  Background counts = 4831.7
  Rate = 0.6 +/- 0.006
[Sun Mar 11 20:08:05 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 20:08:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 20:08:05 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 20:08:05 2012] Source does appear to be extended
[Sun Mar 11 20:08:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 22:04:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 22:04:01 2012] Initial guess for spatial extent in simple fitting = 5.49"
[Sun Mar 11 22:04:01 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.966
[Sun Mar 11 22:04:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.49"
[Sun Mar 11 22:26:23 2012] fullrun_mos2_xmm0601741301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 11 22:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741301_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 22:26:23 2012] fullrun_mos2_xmm0601741301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 11 22:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741301_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 22:26:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601741301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601741301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 22:26:23 2012] fullrun_mos2_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 11 22:26:23 2012] fullrun_mos2_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 11 22:26:23 2012] Fit fullrun_mos2_xmm0601741301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 11 22:26:38 2012] Spatial fit model total counts = 19237.200000, observed total counts = 18495.000000
[Sun Mar 11 22:26:38 2012] Offset between fit and detection position for source 1 = 0.009346 pixels
[Sun Mar 11 22:26:38 2012] 19230.470000 total counts/ 4887.370000 bgd. counts: snr = 205.166012
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.009346 pixels
  Position = (288.8, 277.5) = 16 38 30.85 -20 55 24.4
  Extent = 5.5 (5.4-5.6)", rotation angle = 0
  Source counts = 14343.1 +/- 138.7
  Background counts = 4887.4
  Rate = 0.6 +/- 0.006
[Sun Mar 11 22:26:38 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 22:26:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 22:26:38 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 22:26:38 2012] Source does appear to be extended
[Sun Mar 11 22:26:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 12 01:01:15 2012] Counts = 14343.100000, rescaling region sizes by 3.000000
[Mon Mar 12 01:01:15 2012] XMMSAS src. selection expression = ellipse(25076.718600, 24090.699800, 988.135228, 988.135228, 0.000000, X, Y)
[Mon Mar 12 01:01:15 2012] Writing source region out to fullrun_mos2_xmm0601741301_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 12 01:01:15 2012] Extracting stamp from image fullrun_mos2_xmm0601741301_pi300-10000_cl_sm2.00.img.gz, (232, 221) - (346, 334)
[Mon Mar 12 01:01:15 2012] XMMSAS bgd. selection expression = annulus(25076.718600, 24090.699800, 4940.676142, 9881.352284, X, Y) && !ellipse(25843.175781, 27109.930084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22388.231293, 25885.149139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24015.700531, 24140.391327, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 12 01:01:15 2012] Writing fullrun_mos2_xmm0601741301_pi300-10000_pass1_cl_src1.gif
[Mon Mar 12 01:01:28 2012] Mean detx,y = (116.72, 59.60) 
[Mon Mar 12 01:01:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 12 01:06:25 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 12 01:06:26 2012] Setting source spectrum file to fullrun_mos2_xmm0601741301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 12 01:06:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601741301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 12 01:12:54 2012] Updating aperture counts using extracted products
[Mon Mar 12 01:12:54 2012] Error reading totcts from fullrun_mos2_xmm0601741301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 12 01:12:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 01:12:55 2012] Using photon index=1.80, rate=0.587, arf fullrun_mos2_xmm0601741301_pi300-10000_pass1_cl_src1.arf
[Mon Mar 12 01:12:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 01:12:55 2012] Updating source flux to 6e-12
[Mon Mar 12 01:13:33 2012] Reading fit data from xmm0601741301/analysis//spectral/fullrun_mos2_xmm0601741301_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 12 01:13:33 2012] Spectral fit parameter nH value = 1.72131e+21
[Mon Mar 12 01:13:33 2012] Spectral fit parameter PhoIndex value = 2.05058
[Mon Mar 12 01:13:33 2012] Failed to get F(0.3-8.0) from xmm0601741301/analysis//spectral/fullrun_mos2_xmm0601741301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 12 01:13:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 12 01:13:33 2012] Using Nh = 1.7e+21, photon index=2.05, rate=0.587, arf fullrun_mos2_xmm0601741301_pi300-10000_pass1_cl_src1.arf
[Mon Mar 12 01:13:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 12 01:13:33 2012] Updating source flux to 6.1e-12