[Tue Sep  4 18:05:20 2012] Detection parameters:
  Position = (305.5, 320.9) = 16 1 48.06 -61 8 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28007.1 +/- 197.7
  Background counts = 35.2
  Rate = 1 +/- 0.01

[Tue Sep  4 18:05:21 2012] Off-axis axis estimate = 1.71'
[Tue Sep  4 18:07:05 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 18:07:05 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Sep  4 18:07:05 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Tue Sep  4 18:07:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Sep  4 19:28:22 2012] fullrun_pn_xmm0601741001_pi300-10000_cl_pass0_src1.ximg exists
[Tue Sep  4 19:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741001_pi300-10000_cl_pass0_src1.csv
[Tue Sep  4 19:28:22 2012] fullrun_pn_xmm0601741001_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Sep  4 19:28:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741001_pi300-10000_cl_pass0_src1.csv
[Tue Sep  4 19:28:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601741001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601741001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 19:28:23 2012] fullrun_pn_xmm0601741001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep  4 19:28:23 2012] fullrun_pn_xmm0601741001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep  4 19:28:23 2012] Fit fullrun_pn_xmm0601741001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep  4 20:33:24 2012] Spatial fit model total counts = 25192.200000, observed total counts = 25034.000000
[Tue Sep  4 20:33:24 2012] Offset between fit and detection position for source 1 = 0.113961 pixels
[Tue Sep  4 20:33:24 2012] 25261.050000 total counts/ 5200.950000 bgd. counts: snr = 278.158128
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.113961 pixels
  Position = (305.4, 320.9) = 16 1 48.13 -61 8 54.8
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 20060.1 +/- 158.9
  Background counts = 5200.9
  Rate = 0.9 +/- 0.007
[Tue Sep  4 20:33:24 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 20:33:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 20:33:24 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 20:33:24 2012] Source does appear to be extended
[Tue Sep  4 20:33:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 20:33:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep  4 20:33:40 2012] Initial guess for spatial extent in simple fitting = 5.85"
[Tue Sep  4 20:33:40 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.883
[Tue Sep  4 20:33:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.85"
[Tue Sep  4 22:05:06 2012] fullrun_pn_xmm0601741001_pi300-10000_cl_pass1_src1.ximg exists
[Tue Sep  4 22:05:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741001_pi300-10000_cl_pass1_src1.csv
[Tue Sep  4 22:05:06 2012] fullrun_pn_xmm0601741001_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Sep  4 22:05:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601741001_pi300-10000_cl_pass1_src1.csv
[Tue Sep  4 22:05:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601741001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601741001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 22:05:07 2012] fullrun_pn_xmm0601741001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep  4 22:05:07 2012] fullrun_pn_xmm0601741001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep  4 22:05:07 2012] Fit fullrun_pn_xmm0601741001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep  4 22:53:51 2012] Spatial fit model total counts = 25198.100000, observed total counts = 25034.000000
[Tue Sep  4 22:53:51 2012] Offset between fit and detection position for source 1 = 0.000346 pixels
[Tue Sep  4 22:53:51 2012] 25266.890000 total counts/ 5203.490000 bgd. counts: snr = 278.135978
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000346 pixels
  Position = (305.4, 320.9) = 16 1 48.13 -61 8 54.8
  Extent = 5.8 (5.8-5.9)", rotation angle = 0
  Source counts = 20063.4 +/- 159.0
  Background counts = 5203.5
  Rate = 0.9 +/- 0.007
[Tue Sep  4 22:53:51 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 22:53:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 22:53:51 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 22:53:51 2012] Source does appear to be extended
[Tue Sep  4 22:53:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 22:54:05 2012] Counts = 20063.400000, rescaling region sizes by 3.000000
[Tue Sep  4 22:54:05 2012] XMMSAS src. selection expression = ellipse(26521.312000, 27870.953800, 1051.619430, 1051.619430, 0.000000, X, Y)
[Tue Sep  4 22:54:05 2012] Writing source region out to fullrun_pn_xmm0601741001_pi300-10000_pass1_cl_src1_src.reg
[Tue Sep  4 22:54:05 2012] Extracting stamp from image fullrun_pn_xmm0601741001_pi300-10000_cl_sm2.00.img.gz, (245, 260) - (366, 381)
[Tue Sep  4 22:54:06 2012] XMMSAS bgd. selection expression = annulus(26521.312000, 27870.953800, 5258.097151, 10516.194303, X, Y) && !ellipse(15462.377625, 37461.026428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31295.453200, 32809.117000, 396.416811, 396.416811, 0.000000, X, Y) && !ellipse(20996.400300, 28176.217000, 410.030412, 410.030412, 0.000000, X, Y) && !ellipse(27074.582000, 23937.179600, 411.652012, 411.652012, 0.000000, X, Y) && !ellipse(21944.248001, 37734.024506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33437.903015, 39085.899048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31213.662842, 29535.028534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25983.448944, 24022.821320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31105.276581, 30939.727539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29489.182000, 19714.984000, 1474.808042, 912.344026, 0.000000, X, Y) && !ellipse(16889.096115, 17328.888443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30075.174000, 17147.222000, 757.333622, 757.333622, 0.000000, X, Y) && !ellipse(32488.690216, 38128.091919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22330.427140, 35614.348000, 1061.728031, 1061.728031, 0.000000, X, Y) && !ellipse(31684.452637, 34762.852905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22719.584259, 34265.573883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30559.744200, 15728.632000, 1687.952049, 1687.952049, 0.000000, X, Y) && !ellipse(33452.011841, 28502.070801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27106.499786, 26060.189911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19854.516922, 25664.256012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27353.187250, 25349.880000, 1123.144032, 251.467968, 78.269159, X, Y) && !ellipse(27532.432400, 24755.198000, 1361.792039, 1361.792039, 0.000000, X, Y) && !ellipse(28049.446940, 23312.043200, 835.176024, 835.176024, 0.000000, X, Y) && !ellipse(28704.978000, 20745.814000, 1472.784042, 1472.784042, 0.000000, X, Y) && !ellipse(29088.460571, 20021.717392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22471.139893, 20174.049698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33834.344025, 19403.527008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26829.243042, 18764.190643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30374.420000, 16047.078000, 1790.880052, 1790.880052, 0.000000, X, Y) && !ellipse(29409.804077, 19000.777649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24274.249400, 18103.981400, 669.988819, 669.988819, 0.000000, X, Y) && !ellipse(30054.829600, 17196.318000, 741.326421, 741.326421, 0.000000, X, Y) && !ellipse(31909.139801, 16568.915512, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 22:54:06 2012] Writing fullrun_pn_xmm0601741001_pi300-10000_pass1_cl_src1.gif
[Tue Sep  4 22:54:20 2012] Mean detx,y = (129.81, -185.57) 
[Tue Sep  4 22:54:24 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 22:57:02 2012] grppha failed
[Tue Sep  4 22:57:02 2012] Setting source spectrum file to fullrun_pn_xmm0601741001_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Sep  4 22:57:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0601741001_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Sep  4 23:31:03 2012] Updating aperture counts using extracted products
[Tue Sep  4 23:31:03 2012] Error reading totcts from fullrun_pn_xmm0601741001_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Sep  4 23:31:03 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 23:31:06 2012] Source 1 has no response, skipping
[Tue Sep  4 23:31:07 2012] xmm0601741001/analysis//spectral/fullrun_pn_xmm0601741001_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete