[Tue Sep  4 18:05:53 2012] Detection parameters:
  Position = (385.0, 449.8) = 16 1 0.52 -60 59 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.2 +/- 10.7
  Background counts = 11.9
  Rate = 0.003 +/- 0.0005

[Tue Sep  4 18:05:53 2012] Off-axis axis estimate = 12.64'
[Tue Sep  4 19:47:06 2012] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 19:47:06 2012] Initial guess for spatial extent in simple fitting = 12.75"
[Tue Sep  4 19:47:06 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.892
[Tue Sep  4 19:47:06 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.75"
[Tue Sep  4 20:33:14 2012] fullrun_mos2_xmm0601741001_pi300-10000_cl_pass0_src18.ximg exists
[Tue Sep  4 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741001_pi300-10000_cl_pass0_src18.csv
[Tue Sep  4 20:33:14 2012] fullrun_mos2_xmm0601741001_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Sep  4 20:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741001_pi300-10000_cl_pass0_src18.csv
[Tue Sep  4 20:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601741001_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601741001_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 20:33:15 2012] fullrun_mos2_xmm0601741001_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Sep  4 20:33:15 2012] fullrun_mos2_xmm0601741001_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Sep  4 20:33:15 2012] Fit fullrun_mos2_xmm0601741001_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Sep  4 20:33:30 2012] Spatial fit model total counts = 190.000000, observed total counts = 190.000000
[Tue Sep  4 20:33:30 2012] Offset between fit and detection position for source 10 = 0.426089 pixels
[Tue Sep  4 20:33:30 2012] 188.805700 total counts/ 150.586000 bgd. counts: snr = 3.114548
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.426089 pixels
  Position = (384.6, 449.9) = 16 1 0.77 -60 59 33.0
  Extent = 4.9 (3.7-6.4)", rotation angle = 0
  Source counts = 38.2 +/- 13.7
  Background counts = 150.6
  Rate = 0.002 +/- 0.0006
[Tue Sep  4 20:33:30 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 20:33:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 20:33:30 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 20:33:30 2012] Source does appear to be extended
[Tue Sep  4 20:33:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 22:14:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep  4 22:14:35 2012] Initial guess for spatial extent in simple fitting = 4.93"
[Tue Sep  4 22:14:35 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.126
[Tue Sep  4 22:14:35 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 4.93"
[Tue Sep  4 22:53:42 2012] fullrun_mos2_xmm0601741001_pi300-10000_cl_pass1_src18.ximg exists
[Tue Sep  4 22:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741001_pi300-10000_cl_pass1_src18.csv
[Tue Sep  4 22:53:42 2012] fullrun_mos2_xmm0601741001_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Sep  4 22:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601741001_pi300-10000_cl_pass1_src18.csv
[Tue Sep  4 22:53:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601741001_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601741001_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 22:53:42 2012] fullrun_mos2_xmm0601741001_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Sep  4 22:53:42 2012] fullrun_mos2_xmm0601741001_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Sep  4 22:53:42 2012] Fit fullrun_mos2_xmm0601741001_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Sep  4 22:53:56 2012] Spatial fit model total counts = 168.000000, observed total counts = 168.000000
[Tue Sep  4 22:53:56 2012] Offset between fit and detection position for source 10 = 0.011704 pixels
[Tue Sep  4 22:53:56 2012] 169.619900 total counts/ 130.717000 bgd. counts: snr = 3.402640
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.011704 pixels
  Position = (384.6, 449.9) = 16 1 0.77 -60 59 33.0
  Extent = 5.0 (3.7-6.6)", rotation angle = 0
  Source counts = 38.9 +/- 13.0
  Background counts = 130.7
  Rate = 0.002 +/- 0.0006
[Tue Sep  4 22:53:56 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 22:53:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 22:53:56 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 22:53:56 2012] Source does appear to be extended
[Tue Sep  4 22:53:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 23:25:59 2012] XMMSAS src. selection expression = ellipse(33413.042600, 39094.563400, 298.481409, 298.481409, 0.000000, X, Y)
[Tue Sep  4 23:25:59 2012] Writing source region out to fullrun_mos2_xmm0601741001_pi300-10000_pass1_cl_src10_src.reg
[Tue Sep  4 23:25:59 2012] Extracting stamp from image fullrun_mos2_xmm0601741001_pi300-10000_cl_sm2.00.img.gz, (367, 433) - (402, 467)
[Tue Sep  4 23:25:59 2012] XMMSAS bgd. selection expression = annulus(33413.042600, 39094.563400, 497.469014, 994.938029, X, Y) && !ellipse(32554.449982, 38213.990082, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 23:25:59 2012] Writing fullrun_mos2_xmm0601741001_pi300-10000_pass1_cl_src10.gif
[Tue Sep  4 23:28:52 2012] Mean detx,y = (-9966.88, 8644.20) 
[Tue Sep  4 23:28:53 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 23:28:57 2012] grppha failed
[Tue Sep  4 23:28:57 2012] Setting source spectrum file to fullrun_mos2_xmm0601741001_pi300-10000_pass1_cl_src10_src.pi.gz
[Tue Sep  4 23:28:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601741001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Sep  4 23:30:37 2012] Not generating rmf since there are only 38 counts
[Tue Sep  4 23:30:37 2012] rmf not generated due to insufficient counts
[Tue Sep  4 23:31:03 2012] Updating aperture counts using extracted products
[Tue Sep  4 23:31:03 2012] Error reading totcts from fullrun_mos2_xmm0601741001_pi300-10000_pass1_cl_src10_src.pi.gz
[Tue Sep  4 23:31:03 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 23:31:05 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep  4 23:31:06 2012] xmm0601741001/analysis//spectral/fullrun_mos2_xmm0601741001_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete