[Wed Dec 28 08:12:09 2011] Detection parameters:
  Position = (289.3, 276.1) = 14 51 33.15 -55 40 38.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8126.2 +/- 106.1
  Background counts = 14.0
  Rate = 0.4 +/- 0.005

[Wed Dec 28 08:12:10 2011] Off-axis axis estimate = 1.75'
[Wed Dec 28 10:33:42 2011] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 10:33:42 2011] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Dec 28 10:33:42 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Wed Dec 28 10:33:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Wed Dec 28 11:38:41 2011] fullrun_mos2_xmm0601740901_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 28 11:38:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601740901_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 11:38:41 2011] fullrun_mos2_xmm0601740901_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 28 11:38:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601740901_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 11:38:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601740901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601740901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 11:38:42 2011] fullrun_mos2_xmm0601740901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 28 11:38:42 2011] fullrun_mos2_xmm0601740901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 28 11:38:42 2011] Fit fullrun_mos2_xmm0601740901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 28 11:39:09 2011] Spatial fit model total counts = 7254.410000, observed total counts = 7240.000000
[Wed Dec 28 11:39:09 2011] Offset between fit and detection position for source 2 = 0.188710 pixels
[Wed Dec 28 11:39:09 2011] 7285.090000 total counts/ 1451.940000 bgd. counts: snr = 153.083650
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.188710 pixels
  Position = (289.3, 276.3) = 14 51 33.18 -55 40 39.5
  Extent = 5.2 (5.1-5.4)", rotation angle = 0
  Source counts = 5833.1 +/- 85.4
  Background counts = 1451.9
  Rate = 0.3 +/- 0.004
[Wed Dec 28 11:39:09 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 11:39:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 11:39:09 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 11:39:09 2011] Source does appear to be extended
[Wed Dec 28 11:39:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 13:44:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 13:44:26 2011] Initial guess for spatial extent in simple fitting = 5.25"
[Wed Dec 28 13:44:26 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.773
[Wed Dec 28 13:44:26 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.25"
[Wed Dec 28 14:21:14 2011] fullrun_mos2_xmm0601740901_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 28 14:21:14 2011] fullrun_mos2_xmm0601740901_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 28 14:21:14 2011] Fit fullrun_mos2_xmm0601740901_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Dec 28 14:21:14 2011] fullrun_mos2_xmm0601740901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 28 14:21:14 2011] fullrun_mos2_xmm0601740901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 28 14:21:14 2011] Fit fullrun_mos2_xmm0601740901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 28 14:21:39 2011] Spatial fit model total counts = 7240.000000, observed total counts = 7240.000000
[Wed Dec 28 14:21:39 2011] Offset between fit and detection position for source 2 = 0.000926 pixels
[Wed Dec 28 14:21:39 2011] 7270.570000 total counts/ 1448.500000 bgd. counts: snr = 152.974194
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000926 pixels
  Position = (289.3, 276.3) = 14 51 33.18 -55 40 39.5
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 5822.1 +/- 85.3
  Background counts = 1448.5
  Rate = 0.3 +/- 0.004
[Wed Dec 28 14:21:40 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 14:21:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 14:21:40 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 14:21:40 2011] Source does appear to be extended
[Wed Dec 28 14:21:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 17:24:02 2011] Counts = 5822.070000, rescaling region sizes by 2.000000
[Wed Dec 28 17:24:02 2011] XMMSAS src. selection expression = ellipse(25117.510600, 23992.211200, 630.044418, 630.044418, 0.000000, X, Y)
[Wed Dec 28 17:24:02 2011] Writing source region out to fullrun_mos2_xmm0601740901_pi300-10000_pass1_cl_src2_src.reg
[Wed Dec 28 17:24:02 2011] Extracting stamp from image fullrun_mos2_xmm0601740901_pi300-10000_cl_sm2.00.img.gz, (253, 240) - (325, 313)
[Wed Dec 28 17:24:02 2011] XMMSAS bgd. selection expression = annulus(25117.510600, 23992.211200, 2100.148060, 4200.296121, X, Y) && !ellipse(26046.041260, 21788.758865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20694.608017, 21094.168686, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 28 17:24:02 2011] Writing fullrun_mos2_xmm0601740901_pi300-10000_pass1_cl_src2.gif
[Wed Dec 28 17:24:09 2011] Mean detx,y = (22.17, 98.22) 
[Wed Dec 28 17:24:14 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 17:24:53 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 17:24:53 2011] Setting source spectrum file to fullrun_mos2_xmm0601740901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 28 17:24:53 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601740901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Dec 28 18:05:44 2011] Updating aperture counts using extracted products
[Wed Dec 28 18:05:44 2011] Error reading totcts from fullrun_mos2_xmm0601740901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 28 18:05:45 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 18:05:45 2011] Using photon index=1.80, rate=0.262, arf fullrun_mos2_xmm0601740901_pi300-10000_pass1_cl_src2.arf
[Wed Dec 28 18:05:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 18:05:45 2011] Updating source flux to 2.8e-12
[Wed Dec 28 18:08:03 2011] Reading fit data from xmm0601740901/analysis//spectral/fullrun_mos2_xmm0601740901_pi300-10000_pass1_cl_src2_pl.csv
[Wed Dec 28 18:08:03 2011] Spectral fit parameter nH value = 7.57321e+21
[Wed Dec 28 18:08:03 2011] Spectral fit parameter PhoIndex value = 1.53995
[Wed Dec 28 18:08:03 2011] Failed to get F(0.3-8.0) from xmm0601740901/analysis//spectral/fullrun_mos2_xmm0601740901_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Dec 28 18:08:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 18:08:03 2011] Using Nh = 7.6e+21, photon index=1.54, rate=0.262, arf fullrun_mos2_xmm0601740901_pi300-10000_pass1_cl_src2.arf
[Wed Dec 28 18:08:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 18:08:03 2011] Updating source flux to 4.8e-12