[Wed Dec 28 08:11:20 2011] Detection parameters:
  Position = (386.2, 270.7) = 14 50 43.30 -55 41 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.0 +/- 9.8
  Background counts = 11.0
  Rate = 0.004 +/- 0.0008

[Wed Dec 28 08:11:21 2011] Off-axis axis estimate = 6.67'
[Wed Dec 28 09:54:37 2011] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 09:54:37 2011] Initial guess for spatial extent in simple fitting = 9.77"
[Wed Dec 28 09:54:37 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.995
[Wed Dec 28 09:54:37 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 9.77"
[Wed Dec 28 10:33:42 2011] fullrun_mos1_xmm0601740901_pi300-10000_cl_pass0_src4.ximg exists
[Wed Dec 28 10:33:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601740901_pi300-10000_cl_pass0_src4.csv
[Wed Dec 28 10:33:42 2011] fullrun_mos1_xmm0601740901_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Dec 28 10:33:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601740901_pi300-10000_cl_pass0_src4.csv
[Wed Dec 28 10:33:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601740901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601740901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:33:42 2011] fullrun_mos1_xmm0601740901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Dec 28 10:33:42 2011] fullrun_mos1_xmm0601740901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Dec 28 10:33:42 2011] Fit fullrun_mos1_xmm0601740901_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Dec 28 11:39:01 2011] Source 7 is offset by 6.119469 and 5.752721 pixels which is larger than
2 X fitted extent = 1.122501 x 1.122501, not incorporating fit results
[Wed Dec 28 11:39:01 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 11:39:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 11:39:01 2011] Assessing source extent using major
[Wed Dec 28 11:39:01 2011] Source does appear to be extended
[Wed Dec 28 11:39:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 13:16:50 2011] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 13:16:50 2011] Initial guess for spatial extent in simple fitting = 9.77"
[Wed Dec 28 13:16:50 2011] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.995
[Wed Dec 28 13:16:50 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 9.77"
[Wed Dec 28 13:44:26 2011] fullrun_mos1_xmm0601740901_pi300-10000_cl_pass1_src4.ximg exists
[Wed Dec 28 13:44:26 2011] fullrun_mos1_xmm0601740901_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Dec 28 13:44:26 2011] Fit fullrun_mos1_xmm0601740901_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Dec 28 13:44:26 2011] fullrun_mos1_xmm0601740901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Dec 28 13:44:26 2011] fullrun_mos1_xmm0601740901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Dec 28 13:44:26 2011] Fit fullrun_mos1_xmm0601740901_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Dec 28 14:21:33 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.759009 pixels away
[Wed Dec 28 14:21:33 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 14:21:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 14:21:33 2011] Assessing source extent using major
[Wed Dec 28 14:21:33 2011] Source does appear to be extended
[Wed Dec 28 14:21:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 16:55:19 2011] XMMSAS src. selection expression = ellipse(33552.711792, 23502.634705, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 16:55:19 2011] Writing source region out to fullrun_mos1_xmm0601740901_pi300-10000_pass1_cl_src7_src.reg
[Wed Dec 28 16:55:19 2011] Extracting stamp from image fullrun_mos1_xmm0601740901_pi300-10000_cl_sm2.00.img.gz, (349, 233) - (424, 308)
[Wed Dec 28 16:55:19 2011] XMMSAS bgd. selection expression = annulus(33552.711792, 23502.634705, 1087.500000, 2175.000000, X, Y)
[Wed Dec 28 16:55:19 2011] Writing fullrun_mos1_xmm0601740901_pi300-10000_pass1_cl_src7.gif
[Wed Dec 28 16:58:05 2011] Mean detx,y = (2580.07, -8379.47) 
[Wed Dec 28 16:58:09 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 16:58:39 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 16:58:40 2011] Setting source spectrum file to fullrun_mos1_xmm0601740901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Dec 28 16:58:40 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0601740901_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Dec 28 17:23:39 2011] Not generating rmf since there are only 51 counts
[Wed Dec 28 17:23:39 2011] rmf not generated due to insufficient counts
[Wed Dec 28 18:05:43 2011] Updating aperture counts using extracted products
[Wed Dec 28 18:05:43 2011] Error reading totcts from fullrun_mos1_xmm0601740901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Dec 28 18:05:44 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 18:05:44 2011] Using photon index=1.80, rate=0.00397, arf fullrun_mos1_xmm0601740901_pi300-10000_pass1_cl_src7.arf
[Wed Dec 28 18:05:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 18:05:44 2011] Updating source flux to 6.4e-14
[Wed Dec 28 18:05:48 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting