[Sat Apr  7 05:14:43 2012] Detection parameters:
  Position = (243.0, 404.6) = 12 3 11.73 -53 40 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.6 +/- 14.3
  Background counts = 50.1
  Rate = 0.002 +/- 0.0005

[Sat Apr  7 05:14:43 2012] Off-axis axis estimate = 8.68'
[Sat Apr  7 05:16:32 2012] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 05:16:32 2012] Initial guess for spatial extent in simple fitting = 10.77"
[Sat Apr  7 05:16:32 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.016
[Sat Apr  7 05:16:32 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.77"
[Sat Apr  7 06:01:41 2012] fullrun_pn_xmm0601740601_pi300-10000_cl_pass0_src5.ximg exists
[Sat Apr  7 06:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601740601_pi300-10000_cl_pass0_src5.csv
[Sat Apr  7 06:01:41 2012] fullrun_pn_xmm0601740601_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Apr  7 06:01:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601740601_pi300-10000_cl_pass0_src5.csv
[Sat Apr  7 06:01:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601740601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601740601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 06:01:41 2012] fullrun_pn_xmm0601740601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Apr  7 06:01:41 2012] fullrun_pn_xmm0601740601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Apr  7 06:01:41 2012] Fit fullrun_pn_xmm0601740601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Apr  7 06:22:44 2012] Spatial fit model total counts = 722.471000, observed total counts = 720.000000
[Sat Apr  7 06:22:44 2012] Offset between fit and detection position for source 6 = 0.771181 pixels
[Sat Apr  7 06:22:44 2012] Warning, changing simple spatial fit ID from 5 to 3
[Sat Apr  7 06:22:44 2012] 666.591600 total counts/ 625.463000 bgd. counts: snr = 1.644535
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.771181 pixels
  Position = (243.1, 405.4) = 12 3 11.70 -53 40 43.0
  Extent = 5.6 (2.8-10.9)", rotation angle = 0
  Source counts = 41.1 +/- 25.8
  Background counts = 625.5
  Rate = 0.001 +/- 0.0009
  Deleting source due to low Poisson probability