[Sat Apr  7 05:14:54 2012] Detection parameters:
  Position = (291.9, 276.8) = 12 2 47.84 -53 50 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9566.0 +/- 160.8
  Background counts = 20.9
  Rate = 0.3 +/- 0.006

[Sat Apr  7 05:14:54 2012] Off-axis axis estimate = 1.64'
[Sat Apr  7 06:01:41 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 06:01:41 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Apr  7 06:01:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.692
[Sat Apr  7 06:01:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sat Apr  7 06:09:14 2012] fullrun_mos1_xmm0601740601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Apr  7 06:09:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601740601_pi300-10000_cl_pass0_src1.csv
[Sat Apr  7 06:09:14 2012] fullrun_mos1_xmm0601740601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Apr  7 06:09:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601740601_pi300-10000_cl_pass0_src1.csv
[Sat Apr  7 06:09:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601740601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601740601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 06:09:14 2012] fullrun_mos1_xmm0601740601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Apr  7 06:09:14 2012] fullrun_mos1_xmm0601740601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Apr  7 06:09:14 2012] Fit fullrun_mos1_xmm0601740601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Apr  7 06:22:46 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.053152 pixels away
[Sat Apr  7 06:22:46 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 06:22:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 06:22:46 2012] Assessing source extent using major
[Sat Apr  7 06:22:46 2012] Source does appear to be extended
[Sat Apr  7 06:22:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 06:54:03 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 06:54:03 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Apr  7 06:54:03 2012] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.692
[Sat Apr  7 06:54:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.25"
[Sat Apr  7 07:01:38 2012] fullrun_mos1_xmm0601740601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Apr  7 07:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601740601_pi300-10000_cl_pass1_src1.csv
[Sat Apr  7 07:01:38 2012] fullrun_mos1_xmm0601740601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Apr  7 07:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601740601_pi300-10000_cl_pass1_src1.csv
[Sat Apr  7 07:01:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601740601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601740601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 07:01:38 2012] fullrun_mos1_xmm0601740601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Apr  7 07:01:38 2012] fullrun_mos1_xmm0601740601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Apr  7 07:01:38 2012] Fit fullrun_mos1_xmm0601740601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Apr  7 07:15:11 2012] Spatial fit model total counts = 7501.990000, observed total counts = 7660.000000
[Sat Apr  7 07:15:11 2012] Offset between fit and detection position for source 1 = 0.772505 pixels
[Sat Apr  7 07:15:11 2012] 7436.830000 total counts/ 2011.280000 bgd. counts: snr = 120.978307
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.772505 pixels
  Position = (291.8, 276.0) = 12 2 47.87 -53 50 5.9
  Extent = 4.9 (4.8-5.0)", rotation angle = 0
  Source counts = 5425.6 +/- 86.2
  Background counts = 2011.3
  Rate = 0.2 +/- 0.003
[Sat Apr  7 07:15:11 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 07:15:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 07:15:11 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 07:15:11 2012] Source does appear to be extended
[Sat Apr  7 07:15:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 09:37:42 2012] Counts = 5425.550000, rescaling region sizes by 2.000000
[Sat Apr  7 09:37:42 2012] XMMSAS src. selection expression = ellipse(25339.036020, 23964.742200, 589.917617, 589.917617, 0.000000, X, Y)
[Sat Apr  7 09:37:42 2012] Writing source region out to fullrun_mos1_xmm0601740601_pi300-10000_pass1_cl_src1_src.reg
[Sat Apr  7 09:37:42 2012] Extracting stamp from image fullrun_mos1_xmm0601740601_pi300-10000_cl_sm2.00.img.gz, (258, 242) - (326, 310)
[Sat Apr  7 09:37:42 2012] XMMSAS bgd. selection expression = annulus(25339.036020, 23964.742200, 1966.392057, 3932.784113, X, Y) && !ellipse(21196.790460, 27414.299800, 367.032011, 367.032011, 0.000000, X, Y)
[Sat Apr  7 09:37:42 2012] Writing fullrun_mos1_xmm0601740601_pi300-10000_pass1_cl_src1.gif
[Sat Apr  7 09:37:44 2012] Mean detx,y = (214.90, -126.85) 
[Sat Apr  7 09:37:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr  7 09:37:52 2012] Binned source spectrum to 10 counts/bin
[Sat Apr  7 09:37:52 2012] Setting source spectrum file to fullrun_mos1_xmm0601740601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Apr  7 09:37:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601740601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Apr  7 09:51:01 2012] Updating aperture counts using extracted products
[Sat Apr  7 09:51:01 2012] Error reading totcts from fullrun_mos1_xmm0601740601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Apr  7 09:51:01 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 09:51:01 2012] Using photon index=1.80, rate=0.18, arf fullrun_mos1_xmm0601740601_pi300-10000_pass1_cl_src1.arf
[Sat Apr  7 09:51:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 09:51:01 2012] Updating source flux to 1.9e-12
[Sat Apr  7 09:51:22 2012] Reading fit data from xmm0601740601/analysis//spectral/fullrun_mos1_xmm0601740601_pi300-10000_pass1_cl_src1_pl.csv
[Sat Apr  7 09:51:22 2012] Spectral fit parameter nH value = 2.26827e+22
[Sat Apr  7 09:51:22 2012] Spectral fit parameter PhoIndex value = 0.876364
[Sat Apr  7 09:51:22 2012] Failed to get F(0.3-8.0) from xmm0601740601/analysis//spectral/fullrun_mos1_xmm0601740601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Apr  7 09:51:22 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr  7 09:51:22 2012] Using Nh = 2.3e+22, photon index=0.88, rate=0.18, arf fullrun_mos1_xmm0601740601_pi300-10000_pass1_cl_src1.arf
[Sat Apr  7 09:51:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr  7 09:51:22 2012] Updating source flux to 5.1e-12