[Sat Apr 28 16:12:54 2012] Detection parameters:
  Position = (308.6, 389.3) = 2 1 9.22 -6 43 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 384.8 +/- 25.3
  Background counts = 50.4
  Rate = 0.02 +/- 0.001

[Sat Apr 28 16:12:55 2012] Off-axis axis estimate = 6.63'
[Sat Apr 28 17:07:32 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Sat Apr 28 17:07:32 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Sat Apr 28 17:07:32 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.833
[Sat Apr 28 17:07:32 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.74"
[Sat Apr 28 17:38:12 2012] fullrun_mos2_xmm0601740201_pi300-10000_cl_pass0_src2.ximg exists
[Sat Apr 28 17:38:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601740201_pi300-10000_cl_pass0_src2.csv
[Sat Apr 28 17:38:12 2012] fullrun_mos2_xmm0601740201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Apr 28 17:38:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601740201_pi300-10000_cl_pass0_src2.csv
[Sat Apr 28 17:38:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601740201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601740201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 28 17:38:12 2012] fullrun_mos2_xmm0601740201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Apr 28 17:38:12 2012] fullrun_mos2_xmm0601740201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Apr 28 17:38:12 2012] Fit fullrun_mos2_xmm0601740201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Apr 28 17:38:25 2012] Spatial fit model total counts = 543.946000, observed total counts = 508.000000
[Sat Apr 28 17:38:25 2012] Offset between fit and detection position for source 2 = 0.085527 pixels
[Sat Apr 28 17:38:25 2012] 540.029000 total counts/ 303.591000 bgd. counts: snr = 13.569781
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.085527 pixels
  Position = (308.6, 389.3) = 2 1 9.24 -6 43 22.7
  Extent = 5.0 (4.3-5.5)", rotation angle = 0
  Source counts = 236.4 +/- 23.2
  Background counts = 303.6
  Rate = 0.008 +/- 0.0008
[Sat Apr 28 17:38:25 2012] Vigneting correction estimate = 1.000000
[Sat Apr 28 17:38:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 28 17:38:25 2012] Assessing source extent using major axis lower bound
[Sat Apr 28 17:38:25 2012] Source does appear to be extended
[Sat Apr 28 17:38:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 28 18:30:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr 28 18:30:22 2012] Initial guess for spatial extent in simple fitting = 4.99"
[Sat Apr 28 18:30:22 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.830
[Sat Apr 28 18:30:22 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.99"
[Sat Apr 28 19:03:00 2012] fullrun_mos2_xmm0601740201_pi300-10000_cl_pass1_src2.ximg exists
[Sat Apr 28 19:03:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601740201_pi300-10000_cl_pass1_src2.csv
[Sat Apr 28 19:03:00 2012] fullrun_mos2_xmm0601740201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Apr 28 19:03:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601740201_pi300-10000_cl_pass1_src2.csv
[Sat Apr 28 19:03:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601740201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601740201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr 28 19:03:00 2012] fullrun_mos2_xmm0601740201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Apr 28 19:03:00 2012] fullrun_mos2_xmm0601740201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Apr 28 19:03:00 2012] Fit fullrun_mos2_xmm0601740201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Apr 28 19:03:14 2012] Spatial fit model total counts = 534.057000, observed total counts = 501.000000
[Sat Apr 28 19:03:14 2012] Offset between fit and detection position for source 2 = 0.003481 pixels
[Sat Apr 28 19:03:14 2012] 528.409000 total counts/ 287.964000 bgd. counts: snr = 14.169243
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.003481 pixels
  Position = (308.6, 389.3) = 2 1 9.24 -6 43 22.7
  Extent = 5.0 (4.4-5.5)", rotation angle = 0
  Source counts = 240.4 +/- 23.0
  Background counts = 288.0
  Rate = 0.008 +/- 0.0007
[Sat Apr 28 19:03:14 2012] Vigneting correction estimate = 1.000000
[Sat Apr 28 19:03:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr 28 19:03:14 2012] Assessing source extent using major axis lower bound
[Sat Apr 28 19:03:14 2012] Source does appear to be extended
[Sat Apr 28 19:03:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr 28 20:16:56 2012] XMMSAS src. selection expression = ellipse(26798.260600, 33823.616000, 299.572209, 299.572209, 0.000000, X, Y)
[Sat Apr 28 20:16:56 2012] Writing source region out to fullrun_mos2_xmm0601740201_pi300-10000_pass1_cl_src2_src.reg
[Sat Apr 28 20:16:56 2012] Extracting stamp from image fullrun_mos2_xmm0601740201_pi300-10000_cl_sm2.00.img.gz, (291, 372) - (326, 407)
[Sat Apr 28 20:16:56 2012] XMMSAS bgd. selection expression = annulus(26798.260600, 33823.616000, 499.287014, 998.574029, X, Y) && !ellipse(25662.263600, 33559.121200, 422.984012, 422.984012, 0.000000, X, Y)
[Sat Apr 28 20:16:56 2012] Writing fullrun_mos2_xmm0601740201_pi300-10000_pass1_cl_src2.gif
[Sat Apr 28 20:19:27 2012] Mean detx,y = (3290.86, 6047.53) 
[Sat Apr 28 20:19:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Apr 28 20:19:38 2012] Binned source spectrum to 10 counts/bin
[Sat Apr 28 20:19:39 2012] Setting source spectrum file to fullrun_mos2_xmm0601740201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Apr 28 20:19:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601740201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Apr 28 20:35:47 2012] Updating aperture counts using extracted products
[Sat Apr 28 20:35:47 2012] Error reading totcts from fullrun_mos2_xmm0601740201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Apr 28 20:35:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 28 20:35:47 2012] Using photon index=1.80, rate=0.00778, arf fullrun_mos2_xmm0601740201_pi300-10000_pass1_cl_src2.arf
[Sat Apr 28 20:35:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr 28 20:35:47 2012] Updating source flux to 1.5e-13
[Sat Apr 28 20:36:14 2012] Reading fit data from xmm0601740201/analysis//spectral/fullrun_mos2_xmm0601740201_pi300-10000_pass1_cl_src2_pl.csv
[Sat Apr 28 20:36:14 2012] Spectral fit parameter nH value = 5.04315e+21
[Sat Apr 28 20:36:14 2012] Spectral fit parameter PhoIndex value = 2.30305
[Sat Apr 28 20:36:14 2012] Failed to get F(0.3-8.0) from xmm0601740201/analysis//spectral/fullrun_mos2_xmm0601740201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Apr 28 20:36:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Apr 28 20:36:14 2012] Using Nh = 5e+21, photon index=2.30, rate=0.00778, arf fullrun_mos2_xmm0601740201_pi300-10000_pass1_cl_src2.arf
[Sat Apr 28 20:36:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Apr 28 20:36:14 2012] Updating source flux to 1.7e-13