[Sat Oct  1 02:36:25 2011] Detection parameters:
  Position = (279.1, 286.0) = 1 19 42.59 3 24 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 844.0 +/- 35.4
  Background counts = 26.4
  Rate = 0.01 +/- 0.0006

[Sat Oct  1 02:36:26 2011] Off-axis axis estimate = 1.67'
[Sat Oct  1 05:45:32 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 05:45:32 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Oct  1 05:45:32 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Sat Oct  1 05:45:32 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sat Oct  1 06:50:42 2011] fullrun_mos2_xmm0601670101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Oct  1 06:50:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601670101_pi300-10000_cl_pass0_src1.csv
[Sat Oct  1 06:50:42 2011] fullrun_mos2_xmm0601670101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Oct  1 06:50:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601670101_pi300-10000_cl_pass0_src1.csv
[Sat Oct  1 06:50:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601670101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601670101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 06:50:42 2011] fullrun_mos2_xmm0601670101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 06:50:42 2011] fullrun_mos2_xmm0601670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 06:50:42 2011] Fit fullrun_mos2_xmm0601670101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 06:51:12 2011] Spatial fit model total counts = 1170.720000, observed total counts = 1168.000000
[Sat Oct  1 06:51:12 2011] Offset between fit and detection position for source 1 = 0.041381 pixels
[Sat Oct  1 06:51:12 2011] 1159.071000 total counts/ 625.921000 bgd. counts: snr = 21.310304
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.041381 pixels
  Position = (279.1, 285.9) = 1 19 42.58 3 24 20.9
  Extent = 4.7 (4.4-5.1)", rotation angle = 0
  Source counts = 533.1 +/- 34.0
  Background counts = 625.9
  Rate = 0.009 +/- 0.0006
[Sat Oct  1 06:51:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 06:51:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 06:51:12 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 06:51:12 2011] Source does appear to be extended
[Sat Oct  1 06:51:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 09:15:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 09:15:00 2011] Initial guess for spatial extent in simple fitting = 4.73"
[Sat Oct  1 09:15:00 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.192
[Sat Oct  1 09:15:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.73"
[Sat Oct  1 10:06:39 2011] fullrun_mos2_xmm0601670101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Oct  1 10:06:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601670101_pi300-10000_cl_pass1_src1.csv
[Sat Oct  1 10:06:39 2011] fullrun_mos2_xmm0601670101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Oct  1 10:06:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601670101_pi300-10000_cl_pass1_src1.csv
[Sat Oct  1 10:06:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601670101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601670101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 10:06:40 2011] fullrun_mos2_xmm0601670101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 10:06:40 2011] fullrun_mos2_xmm0601670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 10:06:40 2011] Fit fullrun_mos2_xmm0601670101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 10:07:02 2011] Spatial fit model total counts = 1163.720000, observed total counts = 1168.000000
[Sat Oct  1 10:07:02 2011] Offset between fit and detection position for source 1 = 0.001780 pixels
[Sat Oct  1 10:07:02 2011] 1152.209000 total counts/ 618.689000 bgd. counts: snr = 21.449368
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001780 pixels
  Position = (279.1, 285.9) = 1 19 42.58 3 24 20.9
  Extent = 4.8 (4.4-5.1)", rotation angle = 0
  Source counts = 533.5 +/- 33.9
  Background counts = 618.7
  Rate = 0.009 +/- 0.0006
[Sat Oct  1 10:07:02 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 10:07:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 10:07:02 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 10:07:02 2011] Source does appear to be extended
[Sat Oct  1 10:07:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 12:44:27 2011] XMMSAS src. selection expression = ellipse(24233.221760, 24828.461800, 286.232408, 286.232408, 0.000000, X, Y)
[Sat Oct  1 12:44:27 2011] Writing source region out to fullrun_mos2_xmm0601670101_pi300-10000_pass1_cl_src1_src.reg
[Sat Oct  1 12:44:27 2011] Extracting stamp from image fullrun_mos2_xmm0601670101_pi300-10000_cl_sm2.00.img.gz, (263, 269) - (296, 302)
[Sat Oct  1 12:44:27 2011] XMMSAS bgd. selection expression = annulus(24233.221760, 24828.461800, 477.054014, 954.108027, X, Y) && !ellipse(23469.761012, 25097.784255, 598.255560, 249.476286, 115.063202, X, Y) && !ellipse(23623.953613, 25592.387024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24549.072021, 24221.669739, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Oct  1 12:44:27 2011] Writing fullrun_mos2_xmm0601670101_pi300-10000_pass1_cl_src1.gif
[Sat Oct  1 12:44:30 2011] Mean detx,y = (78.15, 35.48) 
[Sat Oct  1 12:44:31 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct  1 12:44:35 2011] Binned source spectrum to 10 counts/bin
[Sat Oct  1 12:44:35 2011] Setting source spectrum file to fullrun_mos2_xmm0601670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Oct  1 12:44:35 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601670101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Oct  1 13:15:51 2011] Updating aperture counts using extracted products
[Sat Oct  1 13:15:51 2011] Error reading totcts from fullrun_mos2_xmm0601670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Oct  1 13:15:52 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 13:15:52 2011] Using photon index=1.80, rate=0.00912, arf fullrun_mos2_xmm0601670101_pi300-10000_pass1_cl_src1.arf
[Sat Oct  1 13:15:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct  1 13:15:52 2011] Updating source flux to 1.3e-13
[Sat Oct  1 13:17:06 2011] Reading fit data from xmm0601670101/analysis//spectral/fullrun_mos2_xmm0601670101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Oct  1 13:17:06 2011] Spectral fit parameter nH value = 1.22055e+21
[Sat Oct  1 13:17:06 2011] Spectral fit parameter PhoIndex value = 1.71499
[Sat Oct  1 13:17:06 2011] Failed to get F(0.3-8.0) from xmm0601670101/analysis//spectral/fullrun_mos2_xmm0601670101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 13:17:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 13:17:06 2011] Using Nh = 1.2e+21, photon index=1.71, rate=0.00912, arf fullrun_mos2_xmm0601670101_pi300-10000_pass1_cl_src1.arf
[Sat Oct  1 13:17:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct  1 13:17:06 2011] Updating source flux to 1.5e-13