[Wed Jan  4 16:06:18 2012] Detection parameters:
  Position = (335.3, 286.7) = 14 44 55.57 -20 51 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.1 +/- 16.4
  Background counts = 62.5
  Rate = 0.003 +/- 0.0005

[Wed Jan  4 16:06:18 2012] Off-axis axis estimate = 2.80'
[Wed Jan  4 17:37:58 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Wed Jan  4 17:37:58 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Wed Jan  4 17:37:58 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.182
[Wed Jan  4 17:37:58 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.83"
[Wed Jan  4 18:07:35 2012] fullrun_mos2_xmm0601600101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jan  4 18:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601600101_pi300-10000_cl_pass0_src11.csv
[Wed Jan  4 18:07:35 2012] fullrun_mos2_xmm0601600101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jan  4 18:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601600101_pi300-10000_cl_pass0_src11.csv
[Wed Jan  4 18:07:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601600101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601600101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 18:07:35 2012] fullrun_mos2_xmm0601600101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jan  4 18:07:35 2012] fullrun_mos2_xmm0601600101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jan  4 18:07:35 2012] Fit fullrun_mos2_xmm0601600101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jan  4 18:07:54 2012] Spatial fit model total counts = 332.000000, observed total counts = 332.000000
[Wed Jan  4 18:07:54 2012] Offset between fit and detection position for source 7 = 0.379459 pixels
[Wed Jan  4 18:07:54 2012] 330.316600 total counts/ 257.007000 bgd. counts: snr = 4.572865
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.379459 pixels
  Position = (334.9, 286.8) = 14 44 55.68 -20 51 24.4
  Extent = 6.1 (4.6-7.5)", rotation angle = 0
  Source counts = 73.3 +/- 18.2
  Background counts = 257.0
  Rate = 0.002 +/- 0.0005
[Wed Jan  4 18:07:54 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 18:07:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 18:07:54 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 18:07:54 2012] Source does appear to be extended
[Wed Jan  4 18:07:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 19:33:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan  4 19:33:38 2012] Initial guess for spatial extent in simple fitting = 6.11"
[Wed Jan  4 19:33:38 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.104
[Wed Jan  4 19:33:38 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.11"
[Wed Jan  4 19:55:14 2012] fullrun_mos2_xmm0601600101_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jan  4 19:55:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601600101_pi300-10000_cl_pass1_src9.csv
[Wed Jan  4 19:55:14 2012] fullrun_mos2_xmm0601600101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jan  4 19:55:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601600101_pi300-10000_cl_pass1_src9.csv
[Wed Jan  4 19:55:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601600101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601600101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan  4 19:55:14 2012] fullrun_mos2_xmm0601600101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jan  4 19:55:14 2012] fullrun_mos2_xmm0601600101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jan  4 19:55:14 2012] Fit fullrun_mos2_xmm0601600101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Jan  4 19:55:32 2012] Spatial fit model total counts = 331.999000, observed total counts = 332.000000
[Wed Jan  4 19:55:32 2012] Offset between fit and detection position for source 7 = 0.000031 pixels
[Wed Jan  4 19:55:32 2012] 330.315700 total counts/ 257.004000 bgd. counts: snr = 4.573023
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.000031 pixels
  Position = (334.9, 286.8) = 14 44 55.68 -20 51 24.4
  Extent = 6.1 (4.6-7.5)", rotation angle = 0
  Source counts = 73.3 +/- 18.2
  Background counts = 257.0
  Rate = 0.002 +/- 0.0005
[Wed Jan  4 19:55:32 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 19:55:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 19:55:32 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 19:55:32 2012] Source does appear to be extended
[Wed Jan  4 19:55:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 21:22:07 2012] XMMSAS src. selection expression = ellipse(29088.151580, 24905.528800, 366.383411, 366.383411, 0.000000, X, Y)
[Wed Jan  4 21:22:07 2012] Writing source region out to fullrun_mos2_xmm0601600101_pi300-10000_pass1_cl_src7_src.reg
[Wed Jan  4 21:22:07 2012] Extracting stamp from image fullrun_mos2_xmm0601600101_pi300-10000_cl_sm2.00.img.gz, (314, 266) - (356, 308)
[Wed Jan  4 21:22:07 2012] XMMSAS bgd. selection expression = annulus(29088.151580, 24905.528800, 610.639018, 1221.278035, X, Y)
[Wed Jan  4 21:22:07 2012] Writing fullrun_mos2_xmm0601600101_pi300-10000_pass1_cl_src7.gif
[Wed Jan  4 21:26:43 2012] Mean detx,y = (3898.94, 293.48) 
[Wed Jan  4 21:26:46 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan  4 21:27:00 2012] Binned source spectrum to 10 counts/bin
[Wed Jan  4 21:27:01 2012] Setting source spectrum file to fullrun_mos2_xmm0601600101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jan  4 21:27:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601600101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jan  4 21:39:07 2012] Not generating rmf since there are only 73 counts
[Wed Jan  4 21:39:07 2012] rmf not generated due to insufficient counts
[Wed Jan  4 21:41:06 2012] Updating aperture counts using extracted products
[Wed Jan  4 21:41:06 2012] Error reading totcts from fullrun_mos2_xmm0601600101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jan  4 21:41:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan  4 21:41:07 2012] Using photon index=1.80, rate=0.00212, arf fullrun_mos2_xmm0601600101_pi300-10000_pass1_cl_src7.arf
[Wed Jan  4 21:41:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan  4 21:41:07 2012] Updating source flux to 2.5e-14
[Wed Jan  4 21:41:37 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting