[Sat Oct 15 02:32:47 2011] Detection parameters:
  Position = (258.7, 193.2) = 14 33 0.71 -44 19 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.6 +/- 28.9
  Background counts = 314.1
  Rate = 0.003 +/- 0.0005

[Sat Oct 15 02:32:48 2011] Off-axis axis estimate = 8.16'
[Sat Oct 15 02:40:57 2011] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 02:40:57 2011] Initial guess for spatial extent in simple fitting = 10.51"
[Sat Oct 15 02:40:57 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.059
[Sat Oct 15 02:40:57 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 10.51"
[Sat Oct 15 05:28:11 2011] fullrun_pn_xmm0601420101_pi300-10000_cl_pass0_src41.ximg exists
[Sat Oct 15 05:28:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601420101_pi300-10000_cl_pass0_src41.csv
[Sat Oct 15 05:28:11 2011] fullrun_pn_xmm0601420101_pi300-10000_cl_pass0_src41_1.ximg exists
[Sat Oct 15 05:28:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601420101_pi300-10000_cl_pass0_src41.csv
[Sat Oct 15 05:28:11 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601420101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601420101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 05:28:12 2011] fullrun_pn_xmm0601420101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sat Oct 15 05:28:12 2011] fullrun_pn_xmm0601420101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sat Oct 15 05:28:12 2011] Fit fullrun_pn_xmm0601420101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sat Oct 15 08:36:08 2011] Spatial fit model total counts = 2894.990000, observed total counts = 2895.000000
[Sat Oct 15 08:36:08 2011] Offset between fit and detection position for source 44 = 6.962457 pixels
[Sat Oct 15 08:36:08 2011] 2936.514000 total counts/ 2484.600000 bgd. counts: snr = 9.066247
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 6.962457 pixels
  Position = (264.9, 196.5) = 14 32 58.23 -44 19 20.2
  Extent = 21.0 (20.2-42.0)", rotation angle = 0
  Source counts = 451.9 +/- 54.2
  Background counts = 2484.6
  Rate = 0.01 +/- 0.001
[Sat Oct 15 08:36:08 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 08:36:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 08:36:08 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 08:36:08 2011] Source does appear to be extended
[Sat Oct 15 08:36:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 08:36:08 2011] Source is confused with source 1
[Sat Oct 15 08:36:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 08:36:48 2011] Initial guess for spatial extent in simple fitting = 21.01"
[Sat Oct 15 08:36:48 2011] source mask rpix=4.8, npix_max = 113, mask sum = 102, frac = 0.897
[Sat Oct 15 08:36:48 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 21.01"
[Sat Oct 15 11:25:28 2011] fullrun_pn_xmm0601420101_pi300-10000_cl_pass1_src41.ximg exists
[Sat Oct 15 11:25:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601420101_pi300-10000_cl_pass1_src41.csv
[Sat Oct 15 11:25:28 2011] fullrun_pn_xmm0601420101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Oct 15 11:25:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601420101_pi300-10000_cl_pass1_src41.csv
[Sat Oct 15 11:25:28 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601420101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601420101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 11:25:29 2011] fullrun_pn_xmm0601420101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Oct 15 11:25:29 2011] fullrun_pn_xmm0601420101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Oct 15 11:25:29 2011] Fit fullrun_pn_xmm0601420101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sat Oct 15 13:54:34 2011] Warning, spatial fit 41 centroid is now closest to src. 18
[Sat Oct 15 13:54:34 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 13:54:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 13:54:34 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 13:54:34 2011] Source does appear to be extended
[Sat Oct 15 13:54:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 13:55:11 2011] XMMSAS src. selection expression = ellipse(22993.778000, 17044.426000, 1260.888036, 1260.888036, 0.000000, X, Y)
[Sat Oct 15 13:55:11 2011] Writing source region out to fullrun_pn_xmm0601420101_pi300-10000_pass1_cl_src44_src.reg
[Sat Oct 15 13:55:11 2011] Extracting stamp from image fullrun_pn_xmm0601420101_pi300-10000_cl_sm2.00.img.gz, (192, 124) - (337, 269)
[Sat Oct 15 13:55:11 2011] XMMSAS bgd. selection expression = annulus(22993.778000, 17044.426000, 2101.480060, 4202.960121, X, Y) && !ellipse(24056.035800, 17110.062600, 1095.400032, 1095.400032, 0.000000, X, Y) && !ellipse(25891.574310, 15800.038940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18412.334213, 13789.600311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25138.002655, 17613.076141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18363.281219, 19089.414474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25263.789600, 18850.477600, 1096.152032, 1096.152032, 0.000000, X, Y) && !ellipse(25486.177887, 16666.992294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.834000, 16313.678000, 1725.536050, 1725.536050, 0.000000, X, Y) && !ellipse(24432.261353, 19424.991592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26022.128000, 18056.118000, 1535.592044, 1535.592044, 0.000000, X, Y) && !ellipse(22044.606000, 18431.686000, 1593.816046, 1593.816046, 0.000000, X, Y) && !ellipse(25444.258800, 19237.076000, 1456.736042, 1456.736042, 0.000000, X, Y) && !ellipse(27119.776000, 17736.112000, 1610.640046, 1610.640046, 0.000000, X, Y) && !ellipse(25728.117432, 17518.028748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26124.880000, 16594.975600, 1645.800047, 1645.800047, 0.000000, X, Y) && !ellipse(24469.086609, 15561.577484, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Oct 15 13:55:11 2011] Writing fullrun_pn_xmm0601420101_pi300-10000_pass1_cl_src44.gif
[Sat Oct 15 15:24:00 2011] Mean detx,y = (-5510.50, 9530.88) 
[Sat Oct 15 15:24:04 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 15:24:48 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 15:24:48 2011] Setting source spectrum file to fullrun_pn_xmm0601420101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Oct 15 15:24:48 2011] Setting bgd. spectrum file to fullrun_pn_xmm0601420101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Oct 15 18:20:21 2011] Updating aperture counts using extracted products
[Sat Oct 15 18:20:21 2011] Error reading totcts from fullrun_pn_xmm0601420101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Oct 15 18:20:22 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 18:20:22 2011] Using photon index=1.80, rate=0.011, arf fullrun_pn_xmm0601420101_pi300-10000_pass1_cl_src44.arf
[Sat Oct 15 18:20:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 18:20:22 2011] Updating source flux to 5.2e-14
[Sat Oct 15 18:23:12 2011] Flag c found in src. 44 procflags, skipping spectral fitting