[Sat Oct 15 02:32:50 2011] Detection parameters:
  Position = (239.1, 428.5) = 14 33 8.56 -44 2 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.2 +/- 14.1
  Background counts = 47.1
  Rate = 0.001 +/- 0.0003

[Sat Oct 15 02:32:52 2011] Off-axis axis estimate = 10.37'
[Sat Oct 15 05:28:12 2011] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 05:28:12 2011] Initial guess for spatial extent in simple fitting = 11.61"
[Sat Oct 15 05:28:12 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.045
[Sat Oct 15 05:28:12 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 11.61"
[Sat Oct 15 06:41:55 2011] fullrun_mos1_xmm0601420101_pi300-10000_cl_pass0_src28.ximg exists
[Sat Oct 15 06:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601420101_pi300-10000_cl_pass0_src28.csv
[Sat Oct 15 06:41:55 2011] fullrun_mos1_xmm0601420101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat Oct 15 06:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601420101_pi300-10000_cl_pass0_src28.csv
[Sat Oct 15 06:41:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601420101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601420101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 06:41:55 2011] fullrun_mos1_xmm0601420101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat Oct 15 06:41:55 2011] fullrun_mos1_xmm0601420101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Oct 15 06:41:55 2011] Fit fullrun_mos1_xmm0601420101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sat Oct 15 08:36:16 2011] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.713277 pixels away
[Sat Oct 15 08:36:16 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 08:36:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 08:36:16 2011] Assessing source extent using major
[Sat Oct 15 08:36:16 2011] Source does appear to be extended
[Sat Oct 15 08:36:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 11:25:30 2011] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 11:25:30 2011] Initial guess for spatial extent in simple fitting = 11.61"
[Sat Oct 15 11:25:30 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.045
[Sat Oct 15 11:25:30 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 11.61"
[Sat Oct 15 12:28:44 2011] fullrun_mos1_xmm0601420101_pi300-10000_cl_pass1_src27.ximg exists
[Sat Oct 15 12:28:44 2011] fullrun_mos1_xmm0601420101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat Oct 15 12:28:44 2011] Fit fullrun_mos1_xmm0601420101_pi300-10000_cl_pass1_src27 appears to have run properly
[Sat Oct 15 12:28:45 2011] fullrun_mos1_xmm0601420101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat Oct 15 12:28:45 2011] fullrun_mos1_xmm0601420101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Oct 15 12:28:45 2011] Fit fullrun_mos1_xmm0601420101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sat Oct 15 13:54:42 2011] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.713277 pixels away
[Sat Oct 15 13:54:42 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 13:54:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 13:54:42 2011] Assessing source extent using major
[Sat Oct 15 13:54:42 2011] Source does appear to be extended
[Sat Oct 15 13:54:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 16:54:09 2011] XMMSAS src. selection expression = ellipse(20751.983200, 37234.005493, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Oct 15 16:54:09 2011] Writing source region out to fullrun_mos1_xmm0601420101_pi300-10000_pass1_cl_src7_src.reg
[Sat Oct 15 16:54:09 2011] Extracting stamp from image fullrun_mos1_xmm0601420101_pi300-10000_cl_sm2.00.img.gz, (202, 391) - (277, 466)
[Sat Oct 15 16:54:09 2011] XMMSAS bgd. selection expression = annulus(20751.983200, 37234.005493, 1087.500000, 2175.000000, X, Y) && !ellipse(20961.722549, 40244.864471, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Oct 15 16:54:09 2011] Writing fullrun_mos1_xmm0601420101_pi300-10000_pass1_cl_src7.gif
[Sat Oct 15 17:02:12 2011] Mean detx,y = (10728.02, -4008.91) 
[Sat Oct 15 17:02:13 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 17:02:23 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 17:02:23 2011] Setting source spectrum file to fullrun_mos1_xmm0601420101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Oct 15 17:02:23 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0601420101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Oct 15 17:29:58 2011] Not generating rmf since there are only 64 counts
[Sat Oct 15 17:29:58 2011] rmf not generated due to insufficient counts
[Sat Oct 15 18:20:22 2011] Updating aperture counts using extracted products
[Sat Oct 15 18:20:22 2011] Error reading totcts from fullrun_mos1_xmm0601420101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Oct 15 18:20:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 18:20:23 2011] Using photon index=1.80, rate=0.00118, arf fullrun_mos1_xmm0601420101_pi300-10000_pass1_cl_src7.arf
[Sat Oct 15 18:20:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 18:20:23 2011] Updating source flux to 2.2e-14
[Sat Oct 15 18:20:25 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting