[Wed May  8 04:29:25 2013] Detection parameters:
  Position = (230.3, 177.1) = 0 58 1.11 -46 57 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.7 +/- 15.2
  Background counts = 61.5
  Rate = 0.001 +/- 0.0003

[Wed May  8 04:29:25 2013] Off-axis axis estimate = 10.09'
[Wed May  8 04:32:37 2013] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Wed May  8 04:32:37 2013] Initial guess for spatial extent in simple fitting = 11.47"
[Wed May  8 04:32:37 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.914
[Wed May  8 04:32:37 2013] Giving source the simple spatial ID 83 for pass 0, mean size = 11.47"
[Wed May  8 07:01:11 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src83.ximg exists
[Wed May  8 07:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src83.csv
[Wed May  8 07:01:11 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src83_1.ximg exists
[Wed May  8 07:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src83.csv
[Wed May  8 07:01:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 07:01:14 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Wed May  8 07:01:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src83.csv
[Wed May  8 07:01:14 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Wed May  8 07:01:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src83.csv
[Wed May  8 07:01:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  8 08:40:56 2013] Warning, spatial fit 83 centroid is now closest to src. 85
[Wed May  8 08:40:56 2013] Spatial fit model total counts = 873.989000, observed total counts = 687.000000
[Wed May  8 08:40:56 2013] Poor agreement between spatial fit and data for source 84
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 08:40:56 2013] Vigneting correction estimate = 1.000000
[Wed May  8 08:40:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 08:40:56 2013] Assessing source extent using major
[Wed May  8 08:40:56 2013] Source does appear to be extended
[Wed May  8 08:40:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  8 08:40:56 2013] Source is confused with source 83
[Wed May  8 08:41:23 2013] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Wed May  8 08:41:23 2013] Initial guess for spatial extent in simple fitting = 11.47"
[Wed May  8 08:41:23 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.914
[Wed May  8 08:41:23 2013] Giving source the simple spatial ID 80 for pass 1, mean size = 11.47"
[Wed May  8 11:18:22 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src80.ximg exists
[Wed May  8 11:18:22 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src80_1.ximg exists
[Wed May  8 11:18:22 2013] Fit fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src80 appears to have run properly
[Wed May  8 11:18:23 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Wed May  8 11:18:23 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Wed May  8 11:18:23 2013] Fit fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src80 appears to have run properly
[Wed May  8 12:42:51 2013] Spatial fit model total counts = 774.767000, observed total counts = 771.000000
[Wed May  8 12:42:51 2013] Offset between fit and detection position for source 84 = 0.655667 pixels
[Wed May  8 12:42:51 2013] 773.880000 total counts/ 653.548000 bgd. counts: snr = 4.706980
Spatial fit parameters:
  Offset between fit and detection position for source 84 = 0.655667 pixels
  Position = (229.7, 176.7) = 0 58 1.34 -46 57 29.8
  Extent = 22.9 (19.6-45.9)" x 5.1 (3.1-8.9)", rotation angle = 127 (119-133) degrees
  Source counts = 120.3 +/- 27.8
  Background counts = 653.5
  Rate = 0.002 +/- 0.0005
[Wed May  8 12:42:51 2013] Spatial fit model total counts = 877.502000, observed total counts = 687.000000
[Wed May  8 12:42:51 2013] Poor agreement between spatial fit and data for source 84
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  8 12:42:51 2013] Vigneting correction estimate = 1.000000
[Wed May  8 12:42:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  8 12:42:51 2013] Assessing source extent using major axis lower bound
[Wed May  8 12:42:51 2013] Source does appear to be extended
[Wed May  8 12:42:51 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.20
[Wed May  8 12:42:51 2013] Source is asymmetric
[Wed May  8 12:43:18 2013] XMMSAS src. selection expression = ellipse(19937.424600, 15326.399400, 1376.850040, 303.592809, 126.502700, X, Y)
[Wed May  8 12:43:18 2013] Writing source region out to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src84_src.reg
[Wed May  8 12:43:18 2013] Extracting stamp from image fullrun_pn_xmm0601400201_pi300-10000_cl_sm2.00.img.gz, (151, 98) - (309, 256)
[Wed May  8 12:43:19 2013] XMMSAS bgd. selection expression = annulus(19937.424600, 15326.399400, 2294.750066, 4589.500132, X, Y) && !ellipse(16913.990997, 16743.056229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23498.944800, 16350.522600, 650.928019, 326.204009, 47.775992, X, Y) && !ellipse(24059.586220, 13824.649400, 1184.040034, 676.460819, 344.782900, X, Y) && !ellipse(23678.998400, 20713.892000, 1425.352041, 333.845610, 121.507600, X, Y) && !ellipse(22031.240036, 20291.169678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21958.662860, 19831.128200, 555.246416, 295.765609, 24.097200, X, Y) && !ellipse(23180.660000, 19951.738000, 1425.352041, 1425.352041, 0.000000, X, Y) && !ellipse(22194.536000, 18704.650000, 1604.496046, 770.896022, 126.428700, X, Y) && !ellipse(21943.817886, 18243.792953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21511.465000, 17589.270800, 2136.920061, 448.754413, 124.076000, X, Y) && !ellipse(20531.343400, 16232.007400, 1770.336051, 542.420816, 125.453000, X, Y) && !ellipse(19703.335571, 14949.139221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23515.577972, 12611.407166, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  8 12:43:19 2013] Writing fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src84.gif
[Wed May  8 13:45:27 2013] Mean detx,y = (144.80, 13597.10) 
[Wed May  8 13:45:31 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  8 13:46:21 2013] Binned source spectrum to 10 counts/bin
[Wed May  8 13:46:21 2013] Setting source spectrum file to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Wed May  8 13:46:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src84_bgd.pi.gz
[Wed May  8 16:01:12 2013] Updating aperture counts using extracted products
[Wed May  8 16:01:12 2013] Total counts from fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src84_src_b10.pi.gz = 468.00
[Wed May  8 16:01:12 2013] Total counts from fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src84_bgd.pi.gz = 3904.00
[Wed May  8 16:01:12 2013] Got source and background scale factors 1313600.000000, 11099810.000000
[Wed May  8 16:01:12 2013] User source parameters:
  Position = (229.7, 176.7) = 0 58 1.34 -46 57 29.8
  Extent = 22.9 (19.6-45.9)" x 5.1 (3.1-8.9)", rotation angle = 127 (119-133) degrees
  Source aperture counts = 6.0 +/- 22.7
  Background aperture counts = 462.0
  Rate = 0.0001 +/- 0.0004

[Wed May  8 16:01:14 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  8 16:01:14 2013] Using photon index=1.80, rate=0.00237, arf fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src84.arf
[Wed May  8 16:01:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  8 16:01:14 2013] Updating source flux to 1.5e-14
[Wed May  8 16:01:32 2013] Flag p found in src. 84 procflags, skipping spectral fitting
[Wed May  8 16:01:32 2013] Flag c found in src. 84 procflags, skipping spectral fitting
[Wed May  8 16:01:44 2013] xmm0601400201/analysis//spectral/fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src84_pl.csv not found, spectral fit skipped or did not complete