[Wed May 8 04:29:24 2013] Detection parameters: Position = (311.8, 299.2) = 0 57 26.48 -46 48 39.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 116.6 +/- 20.0 Background counts = 72.7 Rate = 0.003 +/- 0.0004 [Wed May 8 04:29:25 2013] Off-axis axis estimate = 0.97' [Wed May 8 04:32:37 2013] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting [Wed May 8 04:32:37 2013] Initial guess for spatial extent in simple fitting = 6.91" [Wed May 8 04:32:37 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.916 [Wed May 8 04:32:37 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 6.91" [Wed May 8 07:01:11 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src54.ximg exists [Wed May 8 07:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src54.csv [Wed May 8 07:01:11 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src54_1.ximg exists [Wed May 8 07:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src54.csv [Wed May 8 07:01:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 07:01:14 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src54.ximg exists [Wed May 8 07:01:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src54.csv [Wed May 8 07:01:14 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists [Wed May 8 07:01:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src54.csv [Wed May 8 07:01:14 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 08:40:56 2013] Source 55 is offset by -6.564357 and -7.156276 pixels which is larger than 2 X fitted extent = 1.505825 x 2.120248, not incorporating fit results [Wed May 8 08:40:56 2013] Vigneting correction estimate = 1.000000 [Wed May 8 08:40:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 08:40:56 2013] Assessing source extent using major [Wed May 8 08:40:56 2013] Source does appear to be extended [Wed May 8 08:40:56 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 08:41:23 2013] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting [Wed May 8 08:41:23 2013] Initial guess for spatial extent in simple fitting = 6.91" [Wed May 8 08:41:23 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.916 [Wed May 8 08:41:23 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 6.91" [Wed May 8 11:18:21 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src53.ximg exists [Wed May 8 11:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src53.csv [Wed May 8 11:18:21 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src53_1.ximg exists [Wed May 8 11:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src53.csv [Wed May 8 11:18:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src53_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 11:18:22 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists [Wed May 8 11:18:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src53.csv [Wed May 8 11:18:22 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists [Wed May 8 11:18:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src53.csv [Wed May 8 11:18:22 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 12:42:51 2013] Source 55 is offset by -6.564357 and -7.156184 pixels which is larger than 2 X fitted extent = 1.562446 x 2.299623, not incorporating fit results [Wed May 8 12:42:51 2013] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 11.826579 pixels away [Wed May 8 12:42:51 2013] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 14.313542 pixels away [Wed May 8 12:42:51 2013] Vigneting correction estimate = 1.000000 [Wed May 8 12:42:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 12:42:51 2013] Assessing source extent using major [Wed May 8 12:42:51 2013] Source does appear to be extended [Wed May 8 12:42:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 12:43:18 2013] XMMSAS src. selection expression = ellipse(27077.482971, 25981.986023, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 8 12:43:18 2013] Writing source region out to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src55_src.reg [Wed May 8 12:43:18 2013] Extracting stamp from image fullrun_pn_xmm0601400201_pi300-10000_cl_sm2.00.img.gz, (274, 262) - (349, 337) [Wed May 8 12:43:18 2013] XMMSAS bgd. selection expression = annulus(27077.482971, 25981.986023, 1087.500000, 2175.000000, X, Y) && !ellipse(27868.204860, 26645.549400, 1364.716839, 1364.716839, 0.000000, X, Y) && !ellipse(28945.126160, 27178.533386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28836.593872, 27604.965607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.883600, 24971.667000, 1007.912029, 384.588011, 120.323100, X, Y) && !ellipse(25317.038000, 24748.865540, 1117.232032, 333.831210, 47.734700, X, Y) && !ellipse(25949.710000, 24114.304000, 1182.648034, 892.424026, 101.122300, X, Y) && !ellipse(25699.618347, 23614.464539, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 8 12:43:18 2013] Writing fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src55.gif [Wed May 8 13:22:53 2013] Mean detx,y = (-82.65, 587.75) [Wed May 8 13:22:57 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 8 13:23:10 2013] Binned source spectrum to 10 counts/bin [Wed May 8 13:23:10 2013] Setting source spectrum file to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src55_src_b10.pi.gz [Wed May 8 13:23:10 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src55_bgd.pi.gz [Wed May 8 14:45:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 14:45:50 2013] rmf not generated due to insufficient counts [Wed May 8 16:01:07 2013] Updating aperture counts using extracted products [Wed May 8 16:01:07 2013] Total counts from fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 1744.00 [Wed May 8 16:01:07 2013] Total counts from fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src55_bgd.pi.gz = 2133.00 [Wed May 8 16:01:07 2013] Got source and background scale factors 1342400.000000, 5250789.000000 [Wed May 8 16:01:07 2013] User source parameters: Position = (311.8, 299.2) = 0 57 26.48 -46 48 39.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1198.7 +/- 42.8 Background aperture counts = 545.3 Rate = 0.02 +/- 0.0008 [Wed May 8 16:01:07 2013] Updating counts from extracted products [Wed May 8 16:01:07 2013] Set source signif. to 1198.68/23.35 = 51.33 [Wed May 8 16:01:14 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 16:01:14 2013] Using photon index=1.80, rate=0.0236, arf fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src55.arf [Wed May 8 16:01:14 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 16:01:14 2013] Updating source flux to 6.2e-14 [Wed May 8 16:01:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 16:01:44 2013] xmm0601400201/analysis//spectral/fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete