[Wed May 8 04:29:24 2013] Detection parameters: Position = (332.0, 317.9) = 0 57 17.92 -46 47 22.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 62.6 +/- 13.5 Background counts = 67.0 Rate = 0.002 +/- 0.0004 [Wed May 8 04:29:25 2013] Off-axis axis estimate = 2.81' [Wed May 8 04:32:37 2013] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting [Wed May 8 04:32:37 2013] Initial guess for spatial extent in simple fitting = 7.83" [Wed May 8 04:32:37 2013] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.614 [Wed May 8 04:32:37 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 7.83" [Wed May 8 07:01:11 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src50.ximg exists [Wed May 8 07:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src50.csv [Wed May 8 07:01:11 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src50_1.ximg exists [Wed May 8 07:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src50.csv [Wed May 8 07:01:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src50_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 07:01:13 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists [Wed May 8 07:01:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src50.csv [Wed May 8 07:01:14 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists [Wed May 8 07:01:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src50.csv [Wed May 8 07:01:14 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 08:40:56 2013] Warning, spatial fit 50 centroid is now closest to src. 24 [Wed May 8 08:40:56 2013] Vigneting correction estimate = 1.000000 [Wed May 8 08:40:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 08:40:56 2013] Assessing source extent using major [Wed May 8 08:40:56 2013] Source does appear to be extended [Wed May 8 08:40:56 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 08:40:56 2013] Source is confused with source 24 [Wed May 8 08:41:23 2013] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting [Wed May 8 08:41:23 2013] Initial guess for spatial extent in simple fitting = 7.83" [Wed May 8 08:41:23 2013] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.614 [Wed May 8 08:41:23 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 7.83" [Wed May 8 11:18:21 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src49.ximg exists [Wed May 8 11:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src49.csv [Wed May 8 11:18:21 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src49_1.ximg exists [Wed May 8 11:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src49.csv [Wed May 8 11:18:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src49_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 11:18:22 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src49.ximg exists [Wed May 8 11:18:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src49.csv [Wed May 8 11:18:22 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists [Wed May 8 11:18:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src49.csv [Wed May 8 11:18:22 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 12:42:50 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 36.301110 pixels away [Wed May 8 12:42:51 2013] Source 51 is offset by -3.616507 and -8.348303 pixels which is larger than 2 X fitted extent = 7.204230 x 6.428092, not incorporating fit results [Wed May 8 12:42:51 2013] Vigneting correction estimate = 1.000000 [Wed May 8 12:42:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 12:42:51 2013] Assessing source extent using major [Wed May 8 12:42:51 2013] Source does appear to be extended [Wed May 8 12:42:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 12:43:18 2013] XMMSAS src. selection expression = ellipse(28836.593872, 27604.965607, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 8 12:43:18 2013] Writing source region out to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src51_src.reg [Wed May 8 12:43:18 2013] Extracting stamp from image fullrun_pn_xmm0601400201_pi300-10000_cl_sm2.00.img.gz, (295, 280) - (370, 355) [Wed May 8 12:43:18 2013] XMMSAS bgd. selection expression = annulus(28836.593872, 27604.965607, 1087.500000, 2175.000000, X, Y) && !ellipse(27868.204860, 26645.549400, 1364.716839, 1364.716839, 0.000000, X, Y) && !ellipse(29806.202880, 30052.779200, 773.476022, 432.260812, 229.434187, X, Y) && !ellipse(28945.126160, 27178.533386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30648.983600, 27633.615400, 479.527214, 479.527214, 0.000000, X, Y) && !ellipse(30182.709656, 26586.374237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27077.482971, 25981.986023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26651.883600, 24971.667000, 1007.912029, 384.588011, 120.323100, X, Y) [Wed May 8 12:43:18 2013] Writing fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src51.gif [Wed May 8 13:20:24 2013] Mean detx,y = (327.21, -1579.32) [Wed May 8 13:20:28 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 8 13:20:50 2013] Binned source spectrum to 10 counts/bin [Wed May 8 13:20:50 2013] Setting source spectrum file to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src51_src_b10.pi.gz [Wed May 8 13:20:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src51_bgd.pi.gz [Wed May 8 14:38:39 2013] Not generating rmf since there are only 62 counts [Wed May 8 14:38:39 2013] rmf not generated due to insufficient counts [Wed May 8 16:01:06 2013] Updating aperture counts using extracted products [Wed May 8 16:01:06 2013] Total counts from fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 529.00 [Wed May 8 16:01:06 2013] Total counts from fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src51_bgd.pi.gz = 1826.00 [Wed May 8 16:01:06 2013] Got source and background scale factors 890627.000000, 5033943.000000 [Wed May 8 16:01:06 2013] User source parameters: Position = (332.0, 317.9) = 0 57 17.92 -46 47 22.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 205.9 +/- 24.0 Background aperture counts = 323.1 Rate = 0.004 +/- 0.0005 [Wed May 8 16:01:06 2013] Updating counts from extracted products [Wed May 8 16:01:06 2013] Set source signif. to 205.94/17.97 = 11.46 [Wed May 8 16:01:14 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 16:01:14 2013] Using photon index=1.80, rate=0.00406, arf fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src51.arf [Wed May 8 16:01:14 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 16:01:14 2013] Updating source flux to 1.3e-14 [Wed May 8 16:01:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 16:01:44 2013] xmm0601400201/analysis//spectral/fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete