[Wed May 8 04:29:23 2013] Detection parameters: Position = (434.5, 287.3) = 0 56 34.47 -46 49 27.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 270.4 +/- 22.7 Background counts = 62.8 Rate = 0.01 +/- 0.0008 [Wed May 8 04:29:25 2013] Off-axis axis estimate = 9.90' [Wed May 8 04:32:37 2013] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting [Wed May 8 04:32:37 2013] Initial guess for spatial extent in simple fitting = 11.38" [Wed May 8 04:32:37 2013] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.082 [Wed May 8 04:32:37 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 11.38" [Wed May 8 07:01:11 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src28.ximg exists [Wed May 8 07:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src28.csv [Wed May 8 07:01:11 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src28_1.ximg exists [Wed May 8 07:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src28.csv [Wed May 8 07:01:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 07:01:12 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists [Wed May 8 07:01:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src28.csv [Wed May 8 07:01:12 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists [Wed May 8 07:01:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src28.csv [Wed May 8 07:01:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 08:40:56 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 15.630555 pixels away [Wed May 8 08:40:56 2013] Vigneting correction estimate = 1.000000 [Wed May 8 08:40:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 08:40:56 2013] Assessing source extent using major [Wed May 8 08:40:56 2013] Source does appear to be extended [Wed May 8 08:40:56 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 08:41:23 2013] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting [Wed May 8 08:41:23 2013] Initial guess for spatial extent in simple fitting = 11.38" [Wed May 8 08:41:23 2013] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.082 [Wed May 8 08:41:23 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 11.38" [Wed May 8 11:18:21 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src28.ximg exists [Wed May 8 11:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src28.csv [Wed May 8 11:18:21 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src28_1.ximg exists [Wed May 8 11:18:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src28.csv [Wed May 8 11:18:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 11:18:22 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists [Wed May 8 11:18:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src28.csv [Wed May 8 11:18:22 2013] fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists [Wed May 8 11:18:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src28.csv [Wed May 8 11:18:22 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0601400201_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 8 12:42:50 2013] Source 29 is offset by 2.602872 and -8.903473 pixels which is larger than 2 X fitted extent = 1.307756 x 1.307756, not incorporating fit results [Wed May 8 12:42:51 2013] Vigneting correction estimate = 1.000000 [Wed May 8 12:42:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 8 12:42:51 2013] Assessing source extent using major [Wed May 8 12:42:51 2013] Source does appear to be extended [Wed May 8 12:42:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 8 12:43:17 2013] XMMSAS src. selection expression = ellipse(37753.493835, 24948.815887, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 8 12:43:17 2013] Writing source region out to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src29_src.reg [Wed May 8 12:43:17 2013] Extracting stamp from image fullrun_pn_xmm0601400201_pi300-10000_cl_sm2.00.img.gz, (397, 250) - (472, 325) [Wed May 8 12:43:17 2013] XMMSAS bgd. selection expression = annulus(37753.493835, 24948.815887, 1087.500000, 2175.000000, X, Y) && !ellipse(40108.462341, 26036.063660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35294.399800, 27609.488800, 592.238417, 592.238417, 0.000000, X, Y) && !ellipse(35256.281800, 26549.898200, 485.312014, 259.699207, 46.027700, X, Y) && !ellipse(40599.194061, 22653.221802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34778.623779, 22378.551056, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 8 12:43:17 2013] Writing fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src29.gif [Wed May 8 13:06:31 2013] Mean detx,y = (9198.38, -4537.38) [Wed May 8 13:06:34 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 8 13:06:51 2013] Binned source spectrum to 10 counts/bin [Wed May 8 13:06:51 2013] Setting source spectrum file to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Wed May 8 13:06:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src29_bgd.pi.gz [Wed May 8 14:26:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 8 14:26:22 2013] rmf not generated due to insufficient counts [Wed May 8 16:01:02 2013] Updating aperture counts using extracted products [Wed May 8 16:01:02 2013] Total counts from fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 617.00 [Wed May 8 16:01:02 2013] Total counts from fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src29_bgd.pi.gz = 3049.00 [Wed May 8 16:01:02 2013] Got source and background scale factors 1224784.000000, 10290679.000000 [Wed May 8 16:01:02 2013] User source parameters: Position = (434.5, 287.3) = 0 56 34.47 -46 49 27.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 254.1 +/- 25.9 Background aperture counts = 362.9 Rate = 0.005 +/- 0.0005 [Wed May 8 16:01:02 2013] Updating counts from extracted products [Wed May 8 16:01:02 2013] Set source signif. to 254.11/19.05 = 13.34 [Wed May 8 16:01:13 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 8 16:01:13 2013] Using photon index=1.80, rate=0.00501, arf fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src29.arf [Wed May 8 16:01:13 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 8 16:01:13 2013] Updating source flux to 2.3e-14 [Wed May 8 16:01:32 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 8 16:01:44 2013] xmm0601400201/analysis//spectral/fullrun_pn_xmm0601400201_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete