[Wed Dec 21 10:12:47 2011] Detection parameters:
  Position = (304.2, 435.8) = 20 44 11.65 -10 34 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.7 +/- 16.9
  Background counts = 26.8
  Rate = 0.003 +/- 0.0003

[Wed Dec 21 10:12:49 2011] Off-axis axis estimate = 9.97'
[Wed Dec 21 13:07:00 2011] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 13:07:00 2011] Initial guess for spatial extent in simple fitting = 11.41"
[Wed Dec 21 13:07:00 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.922
[Wed Dec 21 13:07:00 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 11.41"
[Wed Dec 21 17:08:23 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src10.ximg exists
[Wed Dec 21 17:08:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src10.csv
[Wed Dec 21 17:08:23 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Dec 21 17:08:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src10.csv
[Wed Dec 21 17:08:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 17:08:23 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Dec 21 17:08:23 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Dec 21 17:08:23 2011] Fit fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Dec 21 17:08:40 2011] Spatial fit model total counts = 400.999000, observed total counts = 401.000000
[Wed Dec 21 17:08:40 2011] Offset between fit and detection position for source 7 = 0.388886 pixels
[Wed Dec 21 17:08:40 2011] 399.797000 total counts/ 275.585000 bgd. counts: snr = 7.482311
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.388886 pixels
  Position = (303.9, 435.7) = 20 44 11.75 -10 34 35.4
  Extent = 5.7 (4.6-7.0)", rotation angle = 0
  Source counts = 124.2 +/- 20.0
  Background counts = 275.6
  Rate = 0.002 +/- 0.0003
[Wed Dec 21 17:08:40 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 17:08:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 17:08:40 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 17:08:40 2011] Source does appear to be extended
[Wed Dec 21 17:08:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 18:05:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 18:05:13 2011] Initial guess for spatial extent in simple fitting = 5.71"
[Wed Dec 21 18:05:13 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.912
[Wed Dec 21 18:05:13 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 5.71"
[Wed Dec 21 18:52:34 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src9.ximg exists
[Wed Dec 21 18:52:34 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src9.csv
[Wed Dec 21 18:52:34 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Dec 21 18:52:34 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src9.csv
[Wed Dec 21 18:52:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 18:52:35 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Dec 21 18:52:35 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Dec 21 18:52:35 2011] Fit fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Dec 21 18:52:43 2011] Spatial fit model total counts = 399.574000, observed total counts = 399.000000
[Wed Dec 21 18:52:43 2011] Offset between fit and detection position for source 7 = 0.013742 pixels
[Wed Dec 21 18:52:43 2011] 398.982000 total counts/ 274.880000 bgd. counts: snr = 7.485266
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.013742 pixels
  Position = (303.8, 435.7) = 20 44 11.76 -10 34 35.4
  Extent = 5.7 (4.7-7.0)", rotation angle = 0
  Source counts = 124.1 +/- 20.0
  Background counts = 274.9
  Rate = 0.002 +/- 0.0003
[Wed Dec 21 18:52:43 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 18:52:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 18:52:43 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 18:52:43 2011] Source does appear to be extended
[Wed Dec 21 18:52:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 03:06:42 2011] XMMSAS src. selection expression = ellipse(26385.709600, 37853.995400, 339.225610, 339.225610, 0.000000, X, Y)
[Mon Dec 26 03:06:42 2011] Writing source region out to fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src7_src.reg
[Mon Dec 26 03:06:42 2011] Extracting stamp from image fullrun_mos2_xmm0601391101_pi300-10000_cl_sm2.00.img.gz, (284, 416) - (323, 455)
[Mon Dec 26 03:06:42 2011] XMMSAS bgd. selection expression = annulus(26385.709600, 37853.995400, 565.376016, 1130.752033, X, Y)
[Mon Dec 26 03:06:42 2011] Writing fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src7.gif
[Mon Dec 26 03:27:42 2011] Mean detx,y = (4023.27, 9972.49) 
[Mon Dec 26 03:27:45 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 03:28:08 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 03:28:09 2011] Setting source spectrum file to fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Dec 26 03:28:09 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Dec 26 04:29:53 2011] Updating aperture counts using extracted products
[Mon Dec 26 04:29:53 2011] Error reading totcts from fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Dec 26 04:29:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 04:29:54 2011] Using photon index=1.80, rate=0.00199, arf fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src7.arf
[Mon Dec 26 04:29:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 04:29:54 2011] Updating source flux to 5.3e-14