[Wed Dec 21 10:12:46 2011] Detection parameters:
  Position = (324.4, 306.2) = 20 44 5.68 -10 43 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 859.3 +/- 47.1
  Background counts = 52.2
  Rate = 0.02 +/- 0.001

[Wed Dec 21 10:12:49 2011] Off-axis axis estimate = 1.97'
[Wed Dec 21 13:07:00 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 13:07:00 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Wed Dec 21 13:07:00 2011] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.669
[Wed Dec 21 13:07:00 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.41"
[Wed Dec 21 17:08:23 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Dec 21 17:08:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src2.csv
[Wed Dec 21 17:08:23 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Dec 21 17:08:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src2.csv
[Wed Dec 21 17:08:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 17:08:23 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Dec 21 17:08:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Dec 21 17:08:23 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Dec 21 17:08:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Dec 21 17:08:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601391101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 17:08:40 2011] Source 3 is offset by -0.569319 and 5.175825 pixels which is larger than
2 X fitted extent = 4.748138 x 4.748138, not incorporating fit results
[Wed Dec 21 17:08:40 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 17:08:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 17:08:40 2011] Assessing source extent using major
[Wed Dec 21 17:08:40 2011] Source does appear to be extended
[Wed Dec 21 17:08:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 17:08:40 2011] Source is confused with source 4
[Wed Dec 21 18:05:13 2011] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 18:05:13 2011] Initial guess for spatial extent in simple fitting = 7.41"
[Wed Dec 21 18:05:13 2011] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.669
[Wed Dec 21 18:05:13 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.41"
[Wed Dec 21 18:52:34 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Dec 21 18:52:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src2.csv
[Wed Dec 21 18:52:34 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Dec 21 18:52:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src2.csv
[Wed Dec 21 18:52:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 18:52:35 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Dec 21 18:52:35 2011] fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Dec 21 18:52:35 2011] Fit fullrun_mos2_xmm0601391101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Dec 21 18:52:43 2011] Warning, spatial fit 2 centroid is now closest to src. 4
[Wed Dec 21 18:52:43 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 18:52:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 18:52:43 2011] Assessing source extent using major
[Wed Dec 21 18:52:43 2011] Source does appear to be extended
[Wed Dec 21 18:52:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 03:06:42 2011] XMMSAS src. selection expression = ellipse(28177.172211, 26586.700806, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 03:06:42 2011] Writing source region out to fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src3_src.reg
[Mon Dec 26 03:06:42 2011] Extracting stamp from image fullrun_mos2_xmm0601391101_pi300-10000_cl_sm2.00.img.gz, (287, 269) - (362, 344)
[Mon Dec 26 03:06:42 2011] XMMSAS bgd. selection expression = annulus(28177.172211, 26586.700806, 1087.500000, 2175.000000, X, Y) && !ellipse(26966.925400, 27232.440200, 1513.555283, 1513.555283, 0.000000, X, Y) && !ellipse(28499.636139, 27629.601624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28280.216553, 27181.915894, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 03:06:42 2011] Writing fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src3.gif
[Mon Dec 26 03:18:34 2011] Mean detx,y = (-541.57, -351.92) 
[Mon Dec 26 03:18:39 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 03:19:07 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 03:19:07 2011] Setting source spectrum file to fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Dec 26 03:19:07 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Dec 26 03:42:01 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 03:42:01 2011] rmf not generated due to insufficient counts
[Mon Dec 26 04:29:51 2011] Updating aperture counts using extracted products
[Mon Dec 26 04:29:51 2011] Error reading totcts from fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Dec 26 04:29:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 26 04:29:53 2011] Using photon index=1.80, rate=0.0175, arf fullrun_mos2_xmm0601391101_pi300-10000_pass1_cl_src3.arf
[Mon Dec 26 04:29:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 26 04:29:53 2011] Updating source flux to 1.7e-13
[Mon Dec 26 04:30:48 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting