[Sun Aug 12 11:12:53 2012] Detection parameters:
  Position = (478.1, 282.4) = 20 43 23.14 -10 45 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.6 +/- 11.5
  Background counts = 23.9
  Rate = 0.001 +/- 0.0002

[Sun Aug 12 11:12:54 2012] Off-axis axis estimate = 13.08'
[Sun Aug 12 12:38:41 2012] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 12:38:41 2012] Initial guess for spatial extent in simple fitting = 12.97"
[Sun Aug 12 12:38:41 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Sun Aug 12 12:38:41 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.97"
[Sun Aug 12 13:49:53 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src28.ximg exists
[Sun Aug 12 13:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src28.csv
[Sun Aug 12 13:49:53 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Aug 12 13:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src28.csv
[Sun Aug 12 13:49:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 13:49:53 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Aug 12 13:49:53 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Aug 12 13:49:53 2012] Fit fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Aug 12 13:50:10 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 17.196292 pixels away
[Sun Aug 12 13:50:10 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 13:50:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 13:50:10 2012] Assessing source extent using major
[Sun Aug 12 13:50:10 2012] Source does appear to be extended
[Sun Aug 12 13:50:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 15:31:55 2012] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 15:31:55 2012] Initial guess for spatial extent in simple fitting = 12.97"
[Sun Aug 12 15:31:55 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Sun Aug 12 15:31:55 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.97"
[Sun Aug 12 16:23:39 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_src26.ximg exists
[Sun Aug 12 16:23:39 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Aug 12 16:23:39 2012] Fit fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_src26 appears to have run properly
[Sun Aug 12 16:23:39 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Aug 12 16:23:39 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Aug 12 16:23:39 2012] Fit fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Aug 12 16:23:52 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 17.196292 pixels away
[Sun Aug 12 16:23:52 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:23:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:23:52 2012] Assessing source extent using major
[Sun Aug 12 16:23:52 2012] Source does appear to be extended
[Sun Aug 12 16:23:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 18:51:51 2012] XMMSAS src. selection expression = ellipse(41546.043884, 24523.692596, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 18:51:51 2012] Writing source region out to fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src17_src.reg
[Sun Aug 12 18:51:51 2012] Extracting stamp from image fullrun_mos2_xmm0601390801_pi300-10000_cl_sm2.00.img.gz, (441, 245) - (516, 320)
[Sun Aug 12 18:51:51 2012] XMMSAS bgd. selection expression = annulus(41546.043884, 24523.692596, 1087.500000, 2175.000000, X, Y) && !ellipse(44268.306488, 24183.288635, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 18:51:51 2012] Writing fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src17.gif
[Sun Aug 12 19:11:16 2012] Mean detx,y = (-14204.31, 1372.26) 
[Sun Aug 12 19:11:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 19:11:27 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 19:11:27 2012] Setting source spectrum file to fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Aug 12 19:11:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Aug 12 19:20:50 2012] Not generating rmf since there are only 59 counts
[Sun Aug 12 19:20:50 2012] rmf not generated due to insufficient counts
[Sun Aug 12 19:26:23 2012] Updating aperture counts using extracted products
[Sun Aug 12 19:26:23 2012] Error reading totcts from fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Aug 12 19:26:24 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 19:26:24 2012] Using photon index=1.80, rate=0.000984, arf fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src17.arf
[Sun Aug 12 19:26:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 19:26:24 2012] Updating source flux to 2.1e-14
[Sun Aug 12 19:26:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting