[Sun Aug 12 11:12:52 2012] Detection parameters:
  Position = (320.4, 311.0) = 20 44 9.69 -10 43 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 568396.7 +/- 783.3
  Background counts = 44.5
  Rate = 1e+01 +/- 0.02

[Sun Aug 12 11:12:54 2012] Off-axis axis estimate = 1.84'
[Sun Aug 12 12:38:41 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 12:38:41 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Sun Aug 12 12:38:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.731
[Sun Aug 12 12:38:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.35"
[Sun Aug 12 13:49:52 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 12 13:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 13:49:52 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 12 13:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 13:49:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 13:49:53 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 12 13:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 12 13:49:53 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 12 13:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 12 13:49:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 13:50:10 2012] Spatial fit model total counts = 610214.000000, observed total counts = 514407.000000
[Sun Aug 12 13:50:10 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 13:50:10 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 13:50:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 13:50:10 2012] Assessing source extent using major
[Sun Aug 12 13:50:10 2012] Source does appear to be extended
[Sun Aug 12 13:50:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 15:31:55 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 15:31:55 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Sun Aug 12 15:31:55 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.731
[Sun Aug 12 15:31:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.35"
[Sun Aug 12 16:23:39 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 12 16:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_src1.csv
[Sun Aug 12 16:23:39 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 12 16:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_src1.csv
[Sun Aug 12 16:23:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:23:39 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 12 16:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Aug 12 16:23:39 2012] fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 12 16:23:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Aug 12 16:23:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:23:52 2012] Spatial fit model total counts = 739527.000000, observed total counts = 514407.000000
[Sun Aug 12 16:23:52 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 12 16:23:52 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 16:23:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 16:23:52 2012] Assessing source extent using major
[Sun Aug 12 16:23:52 2012] Source does appear to be extended
[Sun Aug 12 16:23:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 18:51:50 2012] Counts = 568396.687500, rescaling region sizes by 3.000000
[Sun Aug 12 18:51:50 2012] XMMSAS src. selection expression = ellipse(27828.118164, 27009.495636, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun Aug 12 18:51:50 2012] Writing source region out to fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug 12 18:51:50 2012] Extracting stamp from image fullrun_mos2_xmm0601390801_pi300-10000_cl_sm2.00.img.gz, (208, 199) - (433, 424)
[Sun Aug 12 18:51:50 2012] XMMSAS bgd. selection expression = annulus(27828.118164, 27009.495636, 9787.500000, 19575.000000, X, Y) && !ellipse(24912.583940, 11468.854400, 671.607219, 325.950409, 13.419340, X, Y) && !ellipse(35730.831451, 30742.517273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33905.947510, 33816.496918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38196.496094, 20809.369003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33686.158875, 39787.671082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27278.314697, 37542.490692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22048.626495, 33997.702667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34829.459625, 18707.379654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33666.883362, 22405.932373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37469.195953, 20877.688217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36390.367279, 37877.966919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20086.218674, 21088.298416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30555.393463, 18101.407715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41800.430206, 30404.869232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41063.490800, 19188.791400, 562.820016, 194.204806, 113.336589, X, Y) && !ellipse(25783.719055, 39583.584290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26184.138600, 13680.095040, 697.854420, 230.628007, 25.739200, X, Y) && !ellipse(22211.507233, 11185.947159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33992.891000, 21443.655000, 431.819212, 431.819212, 0.000000, X, Y) && !ellipse(28527.136932, 11554.005905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11292.855896, 27897.571075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15488.187164, 33439.737640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37910.862800, 18317.416800, 566.044816, 566.044816, 0.000000, X, Y) && !ellipse(41546.043884, 24523.692596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27144.564941, 11623.770782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30839.805400, 37487.716000, 1291.064037, 1291.064037, 0.000000, X, Y) && !ellipse(31556.743073, 40256.275787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44268.306488, 24183.288635, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 18:51:50 2012] Writing fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src1.gif
[Sun Aug 12 18:52:23 2012] Mean detx,y = (-291.77, -99.66) 
[Sun Aug 12 18:52:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 19:02:15 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 19:02:15 2012] Setting source spectrum file to fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 19:02:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug 12 19:13:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 12 19:13:20 2012] rmf not generated due to insufficient counts
[Sun Aug 12 19:26:23 2012] Updating aperture counts using extracted products
[Sun Aug 12 19:26:23 2012] Error reading totcts from fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 19:26:24 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 19:26:24 2012] Using photon index=1.80, rate=11.2, arf fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src1.arf
[Sun Aug 12 19:26:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 19:26:24 2012] Updating source flux to 1.1e-10
[Sun Aug 12 19:26:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 12 19:27:08 2012] xmm0601390801/analysis//spectral/fullrun_mos2_xmm0601390801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete