[Fri Feb 10 15:02:05 2012] Detection parameters:
  Position = (384.4, 458.8) = 20 43 49.79 -10 32 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 270.5 +/- 21.3
  Background counts = 27.3
  Rate = 0.004 +/- 0.0003

[Fri Feb 10 15:02:06 2012] Off-axis axis estimate = 13.19'
[Fri Feb 10 16:52:00 2012] Using EEF radius (= 13.02 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 16:52:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 10 16:52:00 2012] Initial guess for spatial extent in simple fitting = 13.02"
[Fri Feb 10 16:52:00 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.004
[Fri Feb 10 16:52:00 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.02"
[Fri Feb 10 17:28:03 2012] fullrun_mos2_xmm0601390701_pi300-10000_cl_pass0_src6.ximg exists
[Fri Feb 10 17:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390701_pi300-10000_cl_pass0_src6.csv
[Fri Feb 10 17:28:03 2012] fullrun_mos2_xmm0601390701_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Feb 10 17:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390701_pi300-10000_cl_pass0_src6.csv
[Fri Feb 10 17:28:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390701_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 17:28:03 2012] fullrun_mos2_xmm0601390701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Feb 10 17:28:03 2012] fullrun_mos2_xmm0601390701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Feb 10 17:28:03 2012] Fit fullrun_mos2_xmm0601390701_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Feb 10 17:28:10 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 17.029092 pixels away
[Fri Feb 10 17:28:10 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 17:28:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 17:28:10 2012] Assessing source extent using major
[Fri Feb 10 17:28:10 2012] Source does appear to be extended
[Fri Feb 10 17:28:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 18:08:55 2012] Using EEF radius (= 13.02 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 18:08:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 10 18:08:55 2012] Initial guess for spatial extent in simple fitting = 13.02"
[Fri Feb 10 18:08:55 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.004
[Fri Feb 10 18:08:55 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.02"
[Fri Feb 10 18:57:28 2012] fullrun_mos2_xmm0601390701_pi300-10000_cl_pass1_src5.ximg exists
[Fri Feb 10 18:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390701_pi300-10000_cl_pass1_src5.csv
[Fri Feb 10 18:57:28 2012] fullrun_mos2_xmm0601390701_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Feb 10 18:57:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390701_pi300-10000_cl_pass1_src5.csv
[Fri Feb 10 18:57:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 18:57:28 2012] fullrun_mos2_xmm0601390701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Feb 10 18:57:28 2012] fullrun_mos2_xmm0601390701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Feb 10 18:57:28 2012] Fit fullrun_mos2_xmm0601390701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Feb 10 18:57:30 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 17.047636 pixels away
[Fri Feb 10 18:57:30 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 18:57:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 18:57:30 2012] Assessing source extent using major
[Fri Feb 10 18:57:30 2012] Source does appear to be extended
[Fri Feb 10 18:57:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 19:19:42 2012] XMMSAS src. selection expression = ellipse(33390.505432, 39866.668823, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 10 19:19:42 2012] Writing source region out to fullrun_mos2_xmm0601390701_pi300-10000_pass1_cl_src8_src.reg
[Fri Feb 10 19:19:42 2012] Extracting stamp from image fullrun_mos2_xmm0601390701_pi300-10000_cl_sm2.00.img.gz, (347, 421) - (422, 496)
[Fri Feb 10 19:19:42 2012] XMMSAS bgd. selection expression = annulus(33390.505432, 39866.668823, 1087.500000, 2175.000000, X, Y)
[Fri Feb 10 19:19:42 2012] Writing fullrun_mos2_xmm0601390701_pi300-10000_pass1_cl_src8.gif
[Fri Feb 10 19:25:26 2012] Mean detx,y = (-2151.64, 13826.51) 
[Fri Feb 10 19:25:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 10 19:25:32 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 10 19:25:32 2012] Setting source spectrum file to fullrun_mos2_xmm0601390701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Feb 10 19:25:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601390701_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Feb 10 20:10:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 10 20:10:24 2012] rmf not generated due to insufficient counts
[Fri Feb 10 20:18:44 2012] Updating aperture counts using extracted products
[Fri Feb 10 20:18:44 2012] Error reading totcts from fullrun_mos2_xmm0601390701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Feb 10 20:18:44 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:18:44 2012] Using photon index=1.80, rate=0.00431, arf fullrun_mos2_xmm0601390701_pi300-10000_pass1_cl_src8.arf
[Fri Feb 10 20:18:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:18:44 2012] Updating source flux to 1.1e-13
[Fri Feb 10 20:19:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting