[Fri Feb 10 15:02:04 2012] Detection parameters:
  Position = (316.8, 311.1) = 20 44 9.72 -10 43 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 701269.8 +/- 916.2
  Background counts = 47.8
  Rate = 1e+01 +/- 0.02

[Fri Feb 10 15:02:05 2012] Off-axis axis estimate = 1.62'
[Fri Feb 10 15:21:12 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 15:21:12 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Fri Feb 10 15:21:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Fri Feb 10 15:21:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Fri Feb 10 16:51:58 2012] fullrun_mos1_xmm0601390701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 10 16:51:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390701_pi300-10000_cl_pass0_src1.csv
[Fri Feb 10 16:51:58 2012] fullrun_mos1_xmm0601390701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 10 16:51:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390701_pi300-10000_cl_pass0_src1.csv
[Fri Feb 10 16:51:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601390701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601390701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 10 16:51:59 2012] fullrun_mos1_xmm0601390701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 10 16:51:59 2012] fullrun_mos1_xmm0601390701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 10 16:51:59 2012] Fit fullrun_mos1_xmm0601390701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 10 17:28:06 2012] Spatial fit model total counts = 585385.000000, observed total counts = 619223.000000
[Fri Feb 10 17:28:06 2012] Offset between fit and detection position for source 1 = 0.241293 pixels
[Fri Feb 10 17:28:06 2012] 574462.000000 total counts/ 25600.000000 bgd. counts: snr = 3430.387500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.241293 pixels
  Position = (316.9, 311.4) = 20 44 9.70 -10 43 25.8
  Extent = 7.0 (7.0-7.0)", rotation angle = 0
  Source counts = 548862.0 +/- 757.9
  Background counts = 25600.0
  Rate = 9 +/- 0.01
[Fri Feb 10 17:28:06 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 17:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 17:28:06 2012] Assessing source extent using major axis lower bound
[Fri Feb 10 17:28:06 2012] Source does appear to be extended
[Fri Feb 10 17:28:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 10 18:01:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 10 18:01:13 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Fri Feb 10 18:01:13 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.113
[Fri Feb 10 18:01:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.05"
[Fri Feb 10 18:08:55 2012] fullrun_mos1_xmm0601390701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 10 18:08:55 2012] fullrun_mos1_xmm0601390701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 10 18:08:55 2012] Fit fullrun_mos1_xmm0601390701_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Feb 10 18:08:55 2012] fullrun_mos1_xmm0601390701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 10 18:08:55 2012] fullrun_mos1_xmm0601390701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 10 18:08:55 2012] Fit fullrun_mos1_xmm0601390701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 10 18:57:29 2012] Spatial fit model total counts = 576354.000000, observed total counts = 619223.000000
[Fri Feb 10 18:57:29 2012] Offset between fit and detection position for source 1 = 0.114586 pixels
[Fri Feb 10 18:57:29 2012] 575964.000000 total counts/ 25600.000000 bgd. counts: snr = 3439.775000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.114586 pixels
  Position = (316.8, 311.3) = 20 44 9.72 -10 43 26.1
  Extent = 7.2 (7.2-7.2)" x 6.9 (6.9-6.9)", rotation angle = 31 (29-33) degrees
  Source counts = 550364.0 +/- 758.9
  Background counts = 25600.0
  Rate = 9 +/- 0.01
[Fri Feb 10 18:57:29 2012] Vigneting correction estimate = 1.000000
[Fri Feb 10 18:57:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 10 18:57:29 2012] Assessing source extent using major axis lower bound
[Fri Feb 10 18:57:29 2012] Source does appear to be extended
[Fri Feb 10 18:57:29 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Fri Feb 10 19:13:06 2012] Counts = 550364.000000, rescaling region sizes by 3.000000
[Fri Feb 10 19:13:06 2012] XMMSAS src. selection expression = ellipse(27512.352100, 27034.655200, 1296.109837, 1237.644036, 31.284899, X, Y)
[Fri Feb 10 19:13:06 2012] Writing source region out to fullrun_mos1_xmm0601390701_pi300-10000_pass1_cl_src1_src.reg
[Fri Feb 10 19:13:06 2012] Extracting stamp from image fullrun_mos1_xmm0601390701_pi300-10000_cl_sm2.00.img.gz, (242, 237) - (391, 386)
[Fri Feb 10 19:13:06 2012] XMMSAS bgd. selection expression = annulus(27512.352100, 27034.655200, 6480.549186, 12961.098373, X, Y) && !ellipse(26953.596649, 37628.072906, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Feb 10 19:13:06 2012] Writing fullrun_mos1_xmm0601390701_pi300-10000_pass1_cl_src1.gif
[Fri Feb 10 19:13:35 2012] Mean detx,y = (96.46, -121.41) 
[Fri Feb 10 19:13:38 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 10 19:16:12 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 10 19:16:12 2012] Setting source spectrum file to fullrun_mos1_xmm0601390701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 10 19:16:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601390701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Feb 10 20:18:43 2012] Updating aperture counts using extracted products
[Fri Feb 10 20:18:43 2012] Error reading totcts from fullrun_mos1_xmm0601390701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Feb 10 20:18:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:18:43 2012] Using photon index=1.80, rate=8.78, arf fullrun_mos1_xmm0601390701_pi300-10000_pass1_cl_src1.arf
[Fri Feb 10 20:18:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:18:44 2012] Updating source flux to 7.6e-11
[Fri Feb 10 20:19:02 2012] Reading fit data from xmm0601390701/analysis//spectral/fullrun_mos1_xmm0601390701_pi300-10000_pass1_cl_src1_pl.csv
[Fri Feb 10 20:19:02 2012] Spectral fit parameter nH value = 2.2443e+13
[Fri Feb 10 20:19:02 2012] Spectral fit parameter PhoIndex value = 2.00419
[Fri Feb 10 20:19:02 2012] Failed to get F(0.3-8.0) from xmm0601390701/analysis//spectral/fullrun_mos1_xmm0601390701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 10 20:19:02 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 10 20:19:02 2012] Using Nh = 2.2e+13, photon index=2.00, rate=8.78, arf fullrun_mos1_xmm0601390701_pi300-10000_pass1_cl_src1.arf
[Fri Feb 10 20:19:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 10 20:19:02 2012] Updating source flux to 6.9e-11