[Sun Mar 18 11:43:19 2012] Detection parameters:
  Position = (310.5, 313.1) = 20 44 9.69 -10 43 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 688014.1 +/- 941.7
  Background counts = 57.7
  Rate = 1e+01 +/- 0.02

[Sun Mar 18 11:43:20 2012] Off-axis axis estimate = 1.38'
[Sun Mar 18 20:59:55 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 20:59:55 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Sun Mar 18 20:59:55 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Sun Mar 18 20:59:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.12"
[Sun Mar 18 21:48:39 2012] fullrun_mos2_xmm0601390601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 21:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390601_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 21:48:39 2012] fullrun_mos2_xmm0601390601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 21:48:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390601_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 21:48:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 21:48:39 2012] fullrun_mos2_xmm0601390601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 21:48:40 2012] fullrun_mos2_xmm0601390601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 21:48:40 2012] Fit fullrun_mos2_xmm0601390601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 18 21:48:49 2012] Spatial fit model total counts = 581589.000000, observed total counts = 615438.000000
[Sun Mar 18 21:48:49 2012] Offset between fit and detection position for source 2 = 0.237076 pixels
[Sun Mar 18 21:48:49 2012] 581839.000000 total counts/ 25600.000000 bgd. counts: snr = 3476.493750
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.237076 pixels
  Position = (310.3, 313.3) = 20 44 9.74 -10 43 25.9
  Extent = 7.0 (7.0-7.1)", rotation angle = 0
  Source counts = 556239.0 +/- 762.8
  Background counts = 25600.0
  Rate = 9 +/- 0.01
[Sun Mar 18 21:48:49 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 21:48:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 21:48:49 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 21:48:49 2012] Source does appear to be extended
[Sun Mar 18 21:48:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 22:27:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 22:27:25 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Sun Mar 18 22:27:25 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Sun Mar 18 22:27:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.04"
[Sun Mar 18 23:34:10 2012] fullrun_mos2_xmm0601390601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 23:34:10 2012] fullrun_mos2_xmm0601390601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 23:34:10 2012] Fit fullrun_mos2_xmm0601390601_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Mar 18 23:34:10 2012] fullrun_mos2_xmm0601390601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 23:34:10 2012] fullrun_mos2_xmm0601390601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 23:34:10 2012] Fit fullrun_mos2_xmm0601390601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 18 23:34:17 2012] Spatial fit model total counts = 581652.000000, observed total counts = 615438.000000
[Sun Mar 18 23:34:17 2012] Offset between fit and detection position for source 2 = 0.000213 pixels
[Sun Mar 18 23:34:17 2012] 581902.000000 total counts/ 25600.000000 bgd. counts: snr = 3476.887500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000213 pixels
  Position = (310.3, 313.3) = 20 44 9.74 -10 43 25.9
  Extent = 7.0 (7.0-7.1)", rotation angle = 0
  Source counts = 556302.0 +/- 762.8
  Background counts = 25600.0
  Rate = 9 +/- 0.01
[Sun Mar 18 23:34:17 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 23:34:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 23:34:17 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 23:34:17 2012] Source does appear to be extended
[Sun Mar 18 23:34:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 04:30:34 2012] Counts = 556302.000000, rescaling region sizes by 3.000000
[Mon Mar 19 04:30:34 2012] XMMSAS src. selection expression = ellipse(26945.901000, 27205.307200, 1267.426836, 1267.426836, 0.000000, X, Y)
[Mon Mar 19 04:30:34 2012] Writing source region out to fullrun_mos2_xmm0601390601_pi300-10000_pass1_cl_src2_src.reg
[Mon Mar 19 04:30:34 2012] Extracting stamp from image fullrun_mos2_xmm0601390601_pi300-10000_cl_sm2.00.img.gz, (237, 240) - (383, 386)
[Mon Mar 19 04:30:34 2012] XMMSAS bgd. selection expression = annulus(26945.901000, 27205.307200, 6337.134182, 12674.268365, X, Y) && !ellipse(28485.020203, 27540.761688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.574890, 26570.579468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28272.100128, 27102.562378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33077.835907, 34057.124878, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 04:30:34 2012] Writing fullrun_mos2_xmm0601390601_pi300-10000_pass1_cl_src2.gif
[Mon Mar 19 04:31:19 2012] Mean detx,y = (527.56, -104.04) 
[Mon Mar 19 04:31:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 04:36:27 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 04:36:28 2012] Setting source spectrum file to fullrun_mos2_xmm0601390601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 19 04:36:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601390601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Mar 19 04:55:01 2012] Updating aperture counts using extracted products
[Mon Mar 19 04:55:01 2012] Error reading totcts from fullrun_mos2_xmm0601390601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 19 04:55:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 04:55:01 2012] Using photon index=1.80, rate=8.91, arf fullrun_mos2_xmm0601390601_pi300-10000_pass1_cl_src2.arf
[Mon Mar 19 04:55:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 04:55:01 2012] Updating source flux to 8.4e-11
[Mon Mar 19 04:56:33 2012] Reading fit data from xmm0601390601/analysis//spectral/fullrun_mos2_xmm0601390601_pi300-10000_pass1_cl_src2_pl.csv
[Mon Mar 19 04:56:33 2012] Spectral fit parameter nH value = 1.80061e+13
[Mon Mar 19 04:56:33 2012] Spectral fit parameter PhoIndex value = 2.11652
[Mon Mar 19 04:56:33 2012] Failed to get F(0.3-8.0) from xmm0601390601/analysis//spectral/fullrun_mos2_xmm0601390601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Mar 19 04:56:33 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 04:56:33 2012] Using Nh = 1.8e+13, photon index=2.12, rate=8.91, arf fullrun_mos2_xmm0601390601_pi300-10000_pass1_cl_src2.arf
[Mon Mar 19 04:56:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 04:56:33 2012] Updating source flux to 7.4e-11