[Sun Mar 18 11:42:40 2012] Detection parameters:
  Position = (310.5, 313.1) = 20 44 9.69 -10 43 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 667255.4 +/- 992.6
  Background counts = 58.8
  Rate = 1e+01 +/- 0.02

[Sun Mar 18 11:42:41 2012] Off-axis axis estimate = 1.37'
[Sun Mar 18 20:29:20 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 20:29:20 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Sun Mar 18 20:29:20 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.096
[Sun Mar 18 20:29:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.12"
[Sun Mar 18 20:59:55 2012] fullrun_mos1_xmm0601390601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 20:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390601_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 20:59:55 2012] fullrun_mos1_xmm0601390601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 20:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390601_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 20:59:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601390601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601390601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 20:59:55 2012] fullrun_mos1_xmm0601390601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 20:59:55 2012] fullrun_mos1_xmm0601390601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 20:59:55 2012] Fit fullrun_mos1_xmm0601390601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 18 21:48:45 2012] Spatial fit model total counts = 548828.000000, observed total counts = 590674.000000
[Sun Mar 18 21:48:45 2012] Offset between fit and detection position for source 1 = 0.198894 pixels
[Sun Mar 18 21:48:45 2012] 551508.000000 total counts/ 25600.000000 bgd. counts: snr = 3286.925000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.198894 pixels
  Position = (310.3, 313.3) = 20 44 9.73 -10 43 25.9
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 525908.0 +/- 742.6
  Background counts = 25600.0
  Rate = 8 +/- 0.01
[Sun Mar 18 21:48:45 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 21:48:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 21:48:45 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 21:48:45 2012] Source does appear to be extended
[Sun Mar 18 21:48:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 22:15:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 18 22:15:17 2012] Initial guess for spatial extent in simple fitting = 6.24"
[Sun Mar 18 22:15:17 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.070
[Sun Mar 18 22:15:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.24"
[Sun Mar 18 22:27:25 2012] fullrun_mos1_xmm0601390601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 22:27:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601390601_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 22:27:25 2012] fullrun_mos1_xmm0601390601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 22:27:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601390601_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 22:27:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601390601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601390601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 22:27:25 2012] fullrun_mos1_xmm0601390601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 22:27:25 2012] fullrun_mos1_xmm0601390601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 22:27:25 2012] Fit fullrun_mos1_xmm0601390601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 18 23:34:15 2012] Spatial fit model total counts = 554082.000000, observed total counts = 590674.000000
[Sun Mar 18 23:34:15 2012] Offset between fit and detection position for source 1 = 0.005265 pixels
[Sun Mar 18 23:34:15 2012] 557263.000000 total counts/ 25600.000000 bgd. counts: snr = 3322.893750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005265 pixels
  Position = (310.3, 313.2) = 20 44 9.73 -10 43 26.0
  Extent = 6.4 (6.4-6.4)", rotation angle = 0
  Source counts = 531663.0 +/- 746.5
  Background counts = 25600.0
  Rate = 9 +/- 0.01
[Sun Mar 18 23:34:15 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 23:34:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 23:34:15 2012] Assessing source extent using major axis lower bound
[Sun Mar 18 23:34:15 2012] Source does appear to be extended
[Sun Mar 18 23:34:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 04:01:18 2012] Counts = 531663.000000, rescaling region sizes by 3.000000
[Mon Mar 19 04:01:18 2012] XMMSAS src. selection expression = ellipse(26951.047200, 27204.125400, 1154.691033, 1154.691033, 0.000000, X, Y)
[Mon Mar 19 04:01:18 2012] Writing source region out to fullrun_mos1_xmm0601390601_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 19 04:01:18 2012] Extracting stamp from image fullrun_mos1_xmm0601390601_pi300-10000_cl_sm2.00.img.gz, (244, 247) - (377, 380)
[Mon Mar 19 04:01:18 2012] XMMSAS bgd. selection expression = annulus(26951.047200, 27204.125400, 5773.455166, 11546.910332, X, Y) && !ellipse(33028.047200, 34060.419400, 637.955218, 637.955218, 0.000000, X, Y) && !ellipse(37316.215820, 21014.819153, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 04:01:18 2012] Writing fullrun_mos1_xmm0601390601_pi300-10000_pass1_cl_src1.gif
[Mon Mar 19 04:01:52 2012] Mean detx,y = (110.52, -673.44) 
[Mon Mar 19 04:01:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 04:05:54 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 04:05:54 2012] Setting source spectrum file to fullrun_mos1_xmm0601390601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 19 04:05:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601390601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 19 04:55:01 2012] Updating aperture counts using extracted products
[Mon Mar 19 04:55:01 2012] Error reading totcts from fullrun_mos1_xmm0601390601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 19 04:55:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 04:55:01 2012] Using photon index=1.80, rate=8.51, arf fullrun_mos1_xmm0601390601_pi300-10000_pass1_cl_src1.arf
[Mon Mar 19 04:55:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 04:55:01 2012] Updating source flux to 8e-11
[Mon Mar 19 04:55:54 2012] Reading fit data from xmm0601390601/analysis//spectral/fullrun_mos1_xmm0601390601_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 19 04:55:54 2012] Spectral fit parameter nH value = 1.50855e+13
[Mon Mar 19 04:55:54 2012] Spectral fit parameter PhoIndex value = 2.1398
[Mon Mar 19 04:55:54 2012] Failed to get F(0.3-8.0) from xmm0601390601/analysis//spectral/fullrun_mos1_xmm0601390601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 19 04:55:54 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 04:55:54 2012] Using Nh = 1.5e+13, photon index=2.14, rate=8.51, arf fullrun_mos1_xmm0601390601_pi300-10000_pass1_cl_src1.arf
[Mon Mar 19 04:55:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 04:55:54 2012] Updating source flux to 6.9e-11