[Sun Aug 12 15:31:22 2012] Detection parameters:
  Position = (350.5, 403.9) = 20 44 1.85 -10 36 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.8 +/- 13.4
  Background counts = 34.1
  Rate = 0.002 +/- 0.0004

[Sun Aug 12 15:31:23 2012] Off-axis axis estimate = 8.53'
[Sun Aug 12 16:31:10 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 16:31:10 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Sun Aug 12 16:31:10 2012] source mask rpix=2.5, npix_max = 34, mask sum = 30, frac = 0.857
[Sun Aug 12 16:31:10 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.69"
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src13.ximg exists
[Sun Aug 12 18:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src13.csv
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Aug 12 18:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src13.csv
[Sun Aug 12 18:07:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Aug 12 18:07:47 2012] Fit fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Aug 12 18:08:00 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 15.903968 pixels away
[Sun Aug 12 18:08:00 2012] Source 25 is offset by -9.345695 and -0.248213 pixels which is larger than
2 X fitted extent = 1.238349 x 1.238349, not incorporating fit results
[Sun Aug 12 18:08:00 2012] Spatial fit model total counts = 516.971000, observed total counts = 519.000000
[Sun Aug 12 18:08:00 2012] Offset between fit and detection position for source 25 = 4.579763 pixels
[Sun Aug 12 18:08:00 2012] Warning, changing simple spatial fit ID from 13 to 32
[Sun Aug 12 18:08:00 2012] 561.141000 total counts/ 361.797000 bgd. counts: snr = 10.480227
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 4.579763 pixels
  Position = (348.6, 408.1) = 20 44 2.41 -10 36 16.4
  Extent = 22.1 (18.3-44.2)" x 18.7 (14.4-22.1)", rotation angle = 307
  Source counts = 199.3 +/- 23.7
  Background counts = 361.8
  Rate = 0.003 +/- 0.0004
[Sun Aug 12 18:08:00 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 18:08:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 18:08:00 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 18:08:00 2012] Source does appear to be extended
[Sun Aug 12 18:08:00 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.83
[Sun Aug 12 18:08:00 2012] Source is confused with source 26
[Sun Aug 12 18:08:00 2012] Source is confused with source 24
[Mon Aug 13 00:48:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 13 00:48:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 13 00:48:40 2012] Initial guess for spatial extent in simple fitting = 20.43"
[Mon Aug 13 00:48:40 2012] source mask rpix=4.7, npix_max = 108, mask sum = 103, frac = 0.954
[Mon Aug 13 00:48:40 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 20.43"
[Mon Aug 13 02:17:45 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src13.ximg exists
[Mon Aug 13 02:17:45 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Aug 13 02:17:45 2012] Fit fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src13 appears to have run properly
[Mon Aug 13 02:17:46 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Aug 13 02:17:46 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Aug 13 02:17:46 2012] Fit fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Aug 13 02:17:56 2012] Warning, spatial fit 13 centroid is now closest to src. 23
[Mon Aug 13 02:17:56 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 02:17:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 02:17:56 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 02:17:56 2012] Source does appear to be extended
[Mon Aug 13 02:17:56 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.83
[Mon Aug 13 04:15:37 2012] XMMSAS src. selection expression = ellipse(30278.532000, 35453.866000, 1326.612038, 1124.964032, 307.215500, X, Y)
[Mon Aug 13 04:15:37 2012] Writing source region out to fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src25_src.reg
[Mon Aug 13 04:15:37 2012] Extracting stamp from image fullrun_mos2_xmm0601390501_pi300-10000_cl_sm2.00.img.gz, (272, 332) - (425, 484)
[Mon Aug 13 04:15:37 2012] XMMSAS bgd. selection expression = annulus(30278.532000, 35453.866000, 2211.020064, 4422.040127, X, Y) && !ellipse(34229.728333, 33713.375580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33965.465302, 39715.478180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27566.414581, 37470.348236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30876.338000, 36281.916000, 1508.768043, 1508.768043, 0.000000, X, Y) && !ellipse(29867.420000, 33900.124000, 1654.792048, 1654.792048, 0.000000, X, Y) && !ellipse(30140.178741, 34305.165680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31492.580800, 39132.337000, 840.984024, 840.984024, 0.000000, X, Y) && !ellipse(31047.317291, 37081.208557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31574.810000, 38418.898000, 1902.176055, 1902.176055, 0.000000, X, Y)
[Mon Aug 13 04:15:37 2012] Writing fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src25.gif
[Mon Aug 13 04:28:40 2012] Mean detx,y = (-509.49, 8716.59) 
[Mon Aug 13 04:28:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 04:29:11 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 04:29:11 2012] Setting source spectrum file to fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Aug 13 04:29:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon Aug 13 06:33:58 2012] Updating aperture counts using extracted products
[Mon Aug 13 06:33:58 2012] Error reading totcts from fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Aug 13 06:33:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 06:33:58 2012] Using photon index=1.80, rate=0.00329, arf fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src25.arf
[Mon Aug 13 06:33:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 06:33:58 2012] Updating source flux to 5.1e-14
[Mon Aug 13 06:34:26 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Mon Aug 13 06:34:26 2012] Flag c found in src. 25 procflags, skipping spectral fitting