[Sun Aug 12 15:31:21 2012] Detection parameters:
  Position = (362.5, 450.0) = 20 43 58.30 -10 33 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.3 +/- 14.9
  Background counts = 35.7
  Rate = 0.001 +/- 0.0002

[Sun Aug 12 15:31:23 2012] Off-axis axis estimate = 11.93'
[Sun Aug 12 16:31:10 2012] Using EEF radius (= 12.39 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 16:31:10 2012] Initial guess for spatial extent in simple fitting = 12.39"
[Sun Aug 12 16:31:10 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.936
[Sun Aug 12 16:31:10 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.39"
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src18.ximg exists
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Aug 12 18:07:47 2012] Fit fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src18 appears to have run properly
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Aug 12 18:07:47 2012] Fit fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Aug 12 18:08:00 2012] Spatial fit model total counts = 709.868000, observed total counts = 702.000000
[Sun Aug 12 18:08:00 2012] Offset between fit and detection position for source 18 = 0.442787 pixels
[Sun Aug 12 18:08:00 2012] 676.959400 total counts/ 590.704000 bgd. counts: snr = 3.548962
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.442787 pixels
  Position = (362.3, 450.4) = 20 43 58.36 -10 33 12.3
  Extent = 9.8 (5.6-16.6)", rotation angle = 0
  Source counts = 86.3 +/- 26.0
  Background counts = 590.7
  Rate = 0.001 +/- 0.0004
[Sun Aug 12 18:08:00 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 18:08:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 18:08:00 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 18:08:00 2012] Source does appear to be extended
[Sun Aug 12 18:08:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 18:08:00 2012] Source is confused with source 19
[Mon Aug 13 00:48:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 13 00:48:40 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Mon Aug 13 00:48:40 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.824
[Mon Aug 13 00:48:40 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 9.80"
[Mon Aug 13 02:17:45 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src17.ximg exists
[Mon Aug 13 02:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src17.csv
[Mon Aug 13 02:17:45 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Aug 13 02:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src17.csv
[Mon Aug 13 02:17:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 02:17:46 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Aug 13 02:17:46 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Aug 13 02:17:46 2012] Fit fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Aug 13 02:17:56 2012] Spatial fit model total counts = 574.904000, observed total counts = 568.000000
[Mon Aug 13 02:17:56 2012] Offset between fit and detection position for source 18 = 0.211973 pixels
[Mon Aug 13 02:17:56 2012] 482.341800 total counts/ 382.963000 bgd. counts: snr = 5.078265
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.211973 pixels
  Position = (362.5, 450.4) = 20 43 58.30 -10 33 12.4
  Extent = 10.5 (6.0-18.3)", rotation angle = 0
  Source counts = 99.4 +/- 22.0
  Background counts = 383.0
  Rate = 0.002 +/- 0.0004
[Mon Aug 13 02:17:56 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 02:17:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 02:17:56 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 02:17:56 2012] Source does appear to be extended
[Mon Aug 13 02:17:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 04:15:37 2012] XMMSAS src. selection expression = ellipse(31492.580800, 39132.337000, 630.738018, 630.738018, 0.000000, X, Y)
[Mon Aug 13 04:15:37 2012] Writing source region out to fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src18_src.reg
[Mon Aug 13 04:15:37 2012] Extracting stamp from image fullrun_mos2_xmm0601390501_pi300-10000_cl_sm2.00.img.gz, (326, 414) - (399, 487)
[Mon Aug 13 04:15:37 2012] XMMSAS bgd. selection expression = annulus(31492.580800, 39132.337000, 1051.230030, 2102.460060, X, Y) && !ellipse(33965.465302, 39715.478180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30876.338000, 36281.916000, 1508.768043, 1508.768043, 0.000000, X, Y) && !ellipse(30278.532000, 35453.866000, 1768.816051, 1499.952043, 307.215500, X, Y) && !ellipse(31047.317291, 37081.208557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31574.810000, 38418.898000, 1902.176055, 1902.176055, 0.000000, X, Y)
[Mon Aug 13 04:15:37 2012] Writing fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src18.gif
[Mon Aug 13 04:29:18 2012] Mean detx,y = (-579.23, 12609.29) 
[Mon Aug 13 04:29:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 04:29:30 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 04:29:30 2012] Setting source spectrum file to fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Aug 13 04:29:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon Aug 13 06:28:00 2012] Not generating rmf since there are only 99 counts
[Mon Aug 13 06:28:00 2012] rmf not generated due to insufficient counts
[Mon Aug 13 06:33:58 2012] Updating aperture counts using extracted products
[Mon Aug 13 06:33:58 2012] Error reading totcts from fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon Aug 13 06:33:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 06:33:58 2012] Using photon index=1.80, rate=0.00164, arf fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src18.arf
[Mon Aug 13 06:33:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 06:33:58 2012] Updating source flux to 3.8e-14
[Mon Aug 13 06:34:26 2012] Flag c found in src. 18 procflags, skipping spectral fitting
[Mon Aug 13 06:34:26 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting