[Sun Aug 12 15:31:21 2012] Detection parameters:
  Position = (320.9, 310.4) = 20 44 10.59 -10 43 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7845.9 +/- 314.7
  Background counts = 48.5
  Rate = 0.2 +/- 0.007

[Sun Aug 12 15:31:23 2012] Off-axis axis estimate = 1.84'
[Sun Aug 12 16:31:10 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 16:31:10 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Sun Aug 12 16:31:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.626
[Sun Aug 12 16:31:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.35"
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 12 18:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 12 18:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 18:07:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 12 18:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 12 18:07:47 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 12 18:07:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Aug 12 18:07:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 18:08:00 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Sun Aug 12 18:08:00 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 18:08:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 18:08:00 2012] Assessing source extent using major
[Sun Aug 12 18:08:00 2012] Source does appear to be extended
[Sun Aug 12 18:08:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 18:08:00 2012] Source is confused with source 2
[Mon Aug 13 00:48:40 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 00:48:40 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Mon Aug 13 00:48:40 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.626
[Mon Aug 13 00:48:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.35"
[Mon Aug 13 02:17:45 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 13 02:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 02:17:45 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 13 02:17:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 02:17:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 02:17:46 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 13 02:17:46 2012] fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 13 02:17:46 2012] Fit fullrun_mos2_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 13 02:17:56 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Mon Aug 13 02:17:56 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 02:17:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 02:17:56 2012] Assessing source extent using major
[Mon Aug 13 02:17:56 2012] Source does appear to be extended
[Mon Aug 13 02:17:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 04:15:37 2012] Counts = 7845.946777, rescaling region sizes by 2.000000
[Mon Aug 13 04:15:37 2012] XMMSAS src. selection expression = ellipse(27867.577209, 26952.839966, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Aug 13 04:15:37 2012] Writing source region out to fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 13 04:15:37 2012] Extracting stamp from image fullrun_mos2_xmm0601390501_pi300-10000_cl_sm2.00.img.gz, (246, 235) - (396, 385)
[Mon Aug 13 04:15:37 2012] XMMSAS bgd. selection expression = annulus(27867.577209, 26952.839966, 4350.000000, 8700.000000, X, Y) && !ellipse(28094.086000, 26870.582400, 2147.411613, 2147.411613, 0.000000, X, Y) && !ellipse(36023.020081, 30655.081848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34229.728333, 33713.375580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30876.338000, 36281.916000, 1508.768043, 1508.768043, 0.000000, X, Y) && !ellipse(29867.420000, 33900.124000, 1654.792048, 1654.792048, 0.000000, X, Y) && !ellipse(30140.178741, 34305.165680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30278.532000, 35453.866000, 1768.816051, 1499.952043, 307.215500, X, Y)
[Mon Aug 13 04:15:37 2012] Writing fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src1.gif
[Mon Aug 13 04:22:16 2012] Mean detx,y = (-625.32, -100.82) 
[Mon Aug 13 04:22:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 04:24:33 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 04:24:33 2012] Setting source spectrum file to fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 13 04:24:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 13 06:14:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 13 06:14:26 2012] rmf not generated due to insufficient counts
[Mon Aug 13 06:33:57 2012] Updating aperture counts using extracted products
[Mon Aug 13 06:33:57 2012] Error reading totcts from fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 13 06:33:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 06:33:58 2012] Using photon index=1.80, rate=0.167, arf fullrun_mos2_xmm0601390501_pi300-10000_pass1_cl_src1.arf
[Mon Aug 13 06:33:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 06:33:58 2012] Updating source flux to 1.7e-12
[Mon Aug 13 06:34:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting