[Sun Aug 12 15:30:42 2012] Detection parameters:
  Position = (442.8, 238.7) = 20 43 34.58 -10 48 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.3 +/- 18.4
  Background counts = 28.0
  Rate = 0.006 +/- 0.0006

[Sun Aug 12 15:30:42 2012] Off-axis axis estimate = 11.33'
[Sun Aug 12 16:06:14 2012] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 16:06:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 12 16:06:14 2012] Initial guess for spatial extent in simple fitting = 12.09"
[Sun Aug 12 16:06:14 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.976
[Sun Aug 12 16:06:14 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.09"
[Sun Aug 12 16:31:10 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src4.ximg exists
[Sun Aug 12 16:31:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src4.csv
[Sun Aug 12 16:31:10 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Aug 12 16:31:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src4.csv
[Sun Aug 12 16:31:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:31:10 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Aug 12 16:31:10 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Aug 12 16:31:10 2012] Fit fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Aug 12 18:07:53 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.399723 pixels away
[Sun Aug 12 18:07:53 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 18:07:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 18:07:53 2012] Assessing source extent using major
[Sun Aug 12 18:07:53 2012] Source does appear to be extended
[Sun Aug 12 18:07:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 00:42:07 2012] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 00:42:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 13 00:42:07 2012] Initial guess for spatial extent in simple fitting = 12.09"
[Mon Aug 13 00:42:07 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.976
[Mon Aug 13 00:42:07 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.09"
[Mon Aug 13 00:48:40 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_src4.ximg exists
[Mon Aug 13 00:48:40 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Aug 13 00:48:40 2012] Fit fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_src4 appears to have run properly
[Mon Aug 13 00:48:40 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Aug 13 00:48:40 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Aug 13 00:48:40 2012] Fit fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Aug 13 02:17:49 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.399723 pixels away
[Mon Aug 13 02:17:49 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 02:17:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 02:17:49 2012] Assessing source extent using major
[Mon Aug 13 02:17:49 2012] Source does appear to be extended
[Mon Aug 13 02:17:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 03:38:10 2012] XMMSAS src. selection expression = ellipse(38476.272461, 20718.154144, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Aug 13 03:38:10 2012] Writing source region out to fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src11_src.reg
[Mon Aug 13 03:38:10 2012] Extracting stamp from image fullrun_mos1_xmm0601390501_pi300-10000_cl_sm2.00.img.gz, (405, 201) - (480, 276)
[Mon Aug 13 03:38:10 2012] XMMSAS bgd. selection expression = annulus(38476.272461, 20718.154144, 1087.500000, 2175.000000, X, Y)
[Mon Aug 13 03:38:10 2012] Writing fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src11.gif
[Mon Aug 13 03:44:03 2012] Mean detx,y = (-3033.75, 12126.97) 
[Mon Aug 13 03:44:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 03:44:12 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 03:44:12 2012] Setting source spectrum file to fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Aug 13 03:44:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon Aug 13 04:11:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Aug 13 04:11:53 2012] rmf not generated due to insufficient counts
[Mon Aug 13 06:33:57 2012] Updating aperture counts using extracted products
[Mon Aug 13 06:33:57 2012] Error reading totcts from fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Aug 13 06:33:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 06:33:57 2012] Using photon index=1.80, rate=0.00596, arf fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src11.arf
[Mon Aug 13 06:33:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 06:33:57 2012] Updating source flux to 9.8e-14
[Mon Aug 13 06:33:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting