[Sun Aug 12 15:30:41 2012] Detection parameters:
  Position = (323.7, 309.2) = 20 44 9.75 -10 43 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 563405.4 +/- 821.2
  Background counts = 47.0
  Rate = 1e+01 +/- 0.01

[Sun Aug 12 15:30:42 2012] Off-axis axis estimate = 1.99'
[Sun Aug 12 16:06:14 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 16:06:14 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Sun Aug 12 16:06:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.821
[Sun Aug 12 16:06:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.42"
[Sun Aug 12 16:31:10 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 12 16:31:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 16:31:10 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 12 16:31:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 16:31:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 16:31:10 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 12 16:31:10 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 12 16:31:10 2012] Fit fullrun_mos1_xmm0601390501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 12 18:07:53 2012] Spatial fit model total counts = 471451.000000, observed total counts = 503935.000000
[Sun Aug 12 18:07:53 2012] Offset between fit and detection position for source 1 = 0.238722 pixels
[Sun Aug 12 18:07:53 2012] 471065.000000 total counts/ 25600.000000 bgd. counts: snr = 2784.156250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.238722 pixels
  Position = (323.7, 309.5) = 20 44 9.75 -10 43 25.3
  Extent = 6.8 (6.8-6.8)", rotation angle = 0
  Source counts = 445465.0 +/- 686.3
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Sun Aug 12 18:07:53 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 18:07:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 18:07:53 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 18:07:53 2012] Source does appear to be extended
[Sun Aug 12 18:07:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 00:42:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 13 00:42:07 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Mon Aug 13 00:42:07 2012] source mask rpix=1.6, npix_max = 16, mask sum = 20, frac = 1.178
[Mon Aug 13 00:42:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.79"
[Mon Aug 13 00:48:40 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 13 00:48:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 00:48:40 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 13 00:48:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 00:48:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 00:48:40 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 13 00:48:40 2012] fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 13 00:48:40 2012] Fit fullrun_mos1_xmm0601390501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 13 02:17:49 2012] Spatial fit model total counts = 471479.000000, observed total counts = 503935.000000
[Mon Aug 13 02:17:49 2012] Offset between fit and detection position for source 1 = 0.000299 pixels
[Mon Aug 13 02:17:49 2012] 471092.000000 total counts/ 25600.000000 bgd. counts: snr = 2784.325000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000299 pixels
  Position = (323.7, 309.5) = 20 44 9.75 -10 43 25.3
  Extent = 6.8 (6.8-6.8)", rotation angle = 0
  Source counts = 445492.0 +/- 686.4
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Mon Aug 13 02:17:49 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 02:17:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 02:17:49 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 02:17:49 2012] Source does appear to be extended
[Mon Aug 13 02:17:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 03:38:10 2012] Counts = 445492.000000, rescaling region sizes by 3.000000
[Mon Aug 13 03:38:10 2012] XMMSAS src. selection expression = ellipse(28113.220400, 26876.326000, 1220.792435, 1220.792435, 0.000000, X, Y)
[Mon Aug 13 03:38:10 2012] Writing source region out to fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 13 03:38:10 2012] Extracting stamp from image fullrun_mos1_xmm0601390501_pi300-10000_cl_sm2.00.img.gz, (254, 239) - (394, 380)
[Mon Aug 13 03:38:10 2012] XMMSAS bgd. selection expression = annulus(28113.220400, 26876.326000, 6103.962176, 12207.924351, X, Y) && !ellipse(36017.433899, 30681.010864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34238.009369, 33716.120880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38476.272461, 20718.154144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33966.579922, 39714.023705, 693.808865, 323.046462, 20.539603, X, Y)
[Mon Aug 13 03:38:10 2012] Writing fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src1.gif
[Mon Aug 13 03:38:42 2012] Mean detx,y = (105.15, 464.66) 
[Mon Aug 13 03:38:46 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 03:42:39 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 03:42:39 2012] Setting source spectrum file to fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 13 03:42:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 13 06:33:57 2012] Updating aperture counts using extracted products
[Mon Aug 13 06:33:57 2012] Error reading totcts from fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 13 06:33:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 06:33:57 2012] Using photon index=1.80, rate=7.35, arf fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src1.arf
[Mon Aug 13 06:33:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 06:33:57 2012] Updating source flux to 6.5e-11
[Mon Aug 13 06:34:26 2012] Reading fit data from xmm0601390501/analysis//spectral/fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src1_pl.csv
[Mon Aug 13 06:34:26 2012] Spectral fit parameter nH value = 2.06169e+13
[Mon Aug 13 06:34:26 2012] Spectral fit parameter PhoIndex value = 2.12472
[Mon Aug 13 06:34:26 2012] Failed to get F(0.3-8.0) from xmm0601390501/analysis//spectral/fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Aug 13 06:34:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 06:34:26 2012] Using Nh = 2.1e+13, photon index=2.12, rate=7.35, arf fullrun_mos1_xmm0601390501_pi300-10000_pass1_cl_src1.arf
[Mon Aug 13 06:34:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 06:34:26 2012] Updating source flux to 5.7e-11