[Thu May 23 01:11:23 2013] Detection parameters:
  Position = (301.3, 269.1) = 20 44 13.37 -10 46 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2255.0 +/- 63.4
  Background counts = 219.6
  Rate = 0.06 +/- 0.002

[Thu May 23 01:11:23 2013] Off-axis axis estimate = 2.14'
[Thu May 23 01:33:57 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Thu May 23 01:33:57 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Thu May 23 01:33:57 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Thu May 23 01:33:57 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.50"
[Thu May 23 01:55:18 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 23 01:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src4.csv
[Thu May 23 01:55:18 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 23 01:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src4.csv
[Thu May 23 01:55:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 01:55:19 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 23 01:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 23 01:55:19 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 23 01:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 23 01:55:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 04:20:04 2013] Spatial fit model total counts = 7871.060000, observed total counts = 6138.000000
[Thu May 23 04:20:04 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 23 04:20:04 2013] Vigneting correction estimate = 1.000000
[Thu May 23 04:20:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 04:20:04 2013] Assessing source extent using major
[Thu May 23 04:20:04 2013] Source does appear to be extended
[Thu May 23 04:20:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 04:20:04 2013] Source is confused with source 3
[Thu May 23 04:20:25 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Thu May 23 04:20:25 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Thu May 23 04:20:25 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Thu May 23 04:20:25 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.50"
[Thu May 23 04:39:12 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src4.ximg exists
[Thu May 23 04:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src4.csv
[Thu May 23 04:39:12 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu May 23 04:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src4.csv
[Thu May 23 04:39:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 04:39:12 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu May 23 04:39:12 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu May 23 04:39:12 2013] Fit fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu May 23 06:04:34 2013] Spatial fit model total counts = 6589.330000, observed total counts = 6138.000000
[Thu May 23 06:04:34 2013] Offset between fit and detection position for source 4 = 0.104270 pixels
[Thu May 23 06:04:34 2013] 6561.460000 total counts/ 4291.940000 bgd. counts: snr = 34.642338
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.104270 pixels
  Position = (301.2, 269.2) = 20 44 13.39 -10 46 33.8
  Extent = 9.1 (8.6-9.9)", rotation angle = 0
  Source counts = 2269.5 +/- 81.0
  Background counts = 4291.9
  Rate = 0.04 +/- 0.001
[Thu May 23 06:04:34 2013] Vigneting correction estimate = 1.000000
[Thu May 23 06:04:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 06:04:34 2013] Assessing source extent using major axis lower bound
[Thu May 23 06:04:34 2013] Source does appear to be extended
[Thu May 23 06:04:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 06:04:43 2013] Counts = 2269.520000, rescaling region sizes by 2.000000
[Thu May 23 06:04:43 2013] XMMSAS src. selection expression = ellipse(26158.481440, 23372.617000, 1097.562032, 1097.562032, 0.000000, X, Y)
[Thu May 23 06:04:43 2013] Writing source region out to fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src4_src.reg
[Thu May 23 06:04:43 2013] Extracting stamp from image fullrun_pn_xmm0601390401_pi300-10000_cl_sm2.00.img.gz, (238, 206) - (364, 332)
[Thu May 23 06:04:43 2013] XMMSAS bgd. selection expression = annulus(26158.481440, 23372.617000, 3658.540105, 7317.080211, X, Y) && !ellipse(27206.966800, 27143.296600, 1842.465653, 1820.920852, 296.959706, X, Y) && !ellipse(29033.682007, 27469.532562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26316.175200, 23927.646200, 1502.016043, 367.084811, 105.496000, X, Y)
[Thu May 23 06:04:43 2013] Writing fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src4.gif
[Thu May 23 06:40:50 2013] Mean detx,y = (-121.84, 3470.82) 
[Thu May 23 06:41:14 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 06:42:14 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 06:42:15 2013] Setting source spectrum file to fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 23 06:42:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 23 08:24:04 2013] Updating aperture counts using extracted products
[Thu May 23 08:24:04 2013] Total counts from fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 9628.00
[Thu May 23 08:24:04 2013] Total counts from fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 9815.00
[Thu May 23 08:24:04 2013] Got source and background scale factors 2830564.000000, 2924877.000000
[Thu May 23 08:24:04 2013] User source parameters:
  Position = (301.2, 269.2) = 20 44 13.39 -10 46 33.8
  Extent = 9.1 (8.6-9.9)", rotation angle = 0
  Source aperture counts = 129.5 +/- 99.1
  Background aperture counts = 9498.5
  Rate = 0.002 +/- 0.002

[Thu May 23 08:24:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 08:24:04 2013] Using photon index=1.80, rate=0.0375, arf fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src4.arf
[Thu May 23 08:24:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 08:24:04 2013] Updating source flux to 1.5e-13
[Thu May 23 08:24:14 2013] Flag p found in src. 4 procflags, skipping spectral fitting
[Thu May 23 08:24:14 2013] Flag c found in src. 4 procflags, skipping spectral fitting
[Thu May 23 08:24:17 2013] xmm0601390401/analysis//spectral/fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete