[Thu May 23 01:11:22 2013] Detection parameters:
  Position = (334.3, 316.3) = 20 44 3.63 -10 43 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 530.5 +/- 51.1
  Background counts = 262.2
  Rate = 0.01 +/- 0.001

[Thu May 23 01:11:23 2013] Off-axis axis estimate = 2.90'
[Thu May 23 01:33:57 2013] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Thu May 23 01:33:57 2013] Initial guess for spatial extent in simple fitting = 7.88"
[Thu May 23 01:33:57 2013] source mask rpix=1.8, npix_max = 21, mask sum = 23, frac = 1.076
[Thu May 23 01:33:57 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.88"
[Thu May 23 01:55:18 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 23 01:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src2.csv
[Thu May 23 01:55:18 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 23 01:55:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src2.csv
[Thu May 23 01:55:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 01:55:19 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 23 01:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 23 01:55:19 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 23 01:55:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 23 01:55:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 04:20:04 2013] Source 2 is offset by -6.968230 and 4.722351 pixels which is larger than
2 X fitted extent = 4.841655 x 7.246207, not incorporating fit results
[Thu May 23 04:20:04 2013] Vigneting correction estimate = 1.000000
[Thu May 23 04:20:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 04:20:04 2013] Assessing source extent using major
[Thu May 23 04:20:04 2013] Source does appear to be extended
[Thu May 23 04:20:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 04:20:25 2013] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Thu May 23 04:20:25 2013] Initial guess for spatial extent in simple fitting = 7.88"
[Thu May 23 04:20:25 2013] source mask rpix=1.8, npix_max = 21, mask sum = 23, frac = 1.076
[Thu May 23 04:20:25 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.88"
[Thu May 23 04:39:12 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 23 04:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src2.csv
[Thu May 23 04:39:12 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 23 04:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src2.csv
[Thu May 23 04:39:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 04:39:12 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 23 04:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 23 04:39:12 2013] fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 23 04:39:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 23 04:39:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 06:04:34 2013] Source 2 is offset by -6.968230 and 4.710742 pixels which is larger than
2 X fitted extent = 4.854529 x 7.246207, not incorporating fit results
[Thu May 23 06:04:34 2013] Vigneting correction estimate = 1.000000
[Thu May 23 06:04:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 06:04:34 2013] Assessing source extent using major
[Thu May 23 06:04:34 2013] Source does appear to be extended
[Thu May 23 06:04:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 06:04:43 2013] XMMSAS src. selection expression = ellipse(29033.682007, 27469.532562, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 06:04:43 2013] Writing source region out to fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src2_src.reg
[Thu May 23 06:04:43 2013] Extracting stamp from image fullrun_pn_xmm0601390401_pi300-10000_cl_sm2.00.img.gz, (297, 279) - (372, 354)
[Thu May 23 06:04:43 2013] XMMSAS bgd. selection expression = annulus(29033.682007, 27469.532562, 1087.500000, 2175.000000, X, Y) && !ellipse(27206.966800, 27143.296600, 1842.465653, 1820.920852, 296.959706, X, Y) && !ellipse(26316.175200, 23927.646200, 1502.016043, 367.084811, 105.496000, X, Y)
[Thu May 23 06:04:43 2013] Writing fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src2.gif
[Thu May 23 06:22:04 2013] Mean detx,y = (1400.52, -608.73) 
[Thu May 23 06:22:23 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 06:22:44 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 06:22:45 2013] Setting source spectrum file to fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 23 06:22:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 23 06:45:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 23 06:45:31 2013] rmf not generated due to insufficient counts
[Thu May 23 08:24:04 2013] Updating aperture counts using extracted products
[Thu May 23 08:24:04 2013] Total counts from fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 10785.00
[Thu May 23 08:24:04 2013] Total counts from fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 9449.00
[Thu May 23 08:24:04 2013] Got source and background scale factors 836302.000000, 2235067.000000
[Thu May 23 08:24:04 2013] User source parameters:
  Position = (334.3, 316.3) = 20 44 3.63 -10 43 6.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 7249.4 +/- 104.9
  Background aperture counts = 3535.6
  Rate = 0.1 +/- 0.002

[Thu May 23 08:24:04 2013] Updating counts from extracted products
[Thu May 23 08:24:04 2013] Set source signif. to 7249.44/59.46 = 121.92
[Thu May 23 08:24:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 08:24:04 2013] Using photon index=1.80, rate=0.12, arf fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src2.arf
[Thu May 23 08:24:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 08:24:04 2013] Updating source flux to 3.9e-13
[Thu May 23 08:24:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 08:24:17 2013] xmm0601390401/analysis//spectral/fullrun_pn_xmm0601390401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete