[Thu May 23 01:12:12 2013] Detection parameters:
  Position = (377.6, 124.8) = 20 43 50.83 -10 57 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.8 +/- 10.7
  Background counts = 21.5
  Rate = 0.0009 +/- 0.0002

[Thu May 23 01:12:14 2013] Off-axis axis estimate = 13.83'
[Thu May 23 02:26:53 2013] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Thu May 23 02:26:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 23 02:26:53 2013] Initial guess for spatial extent in simple fitting = 13.35"
[Thu May 23 02:26:53 2013] source mask rpix=3.1, npix_max = 50, mask sum = 36, frac = 0.707
[Thu May 23 02:26:53 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 13.35"
[Thu May 23 04:20:00 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src25.ximg exists
[Thu May 23 04:20:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src25.csv
[Thu May 23 04:20:00 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu May 23 04:20:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src25.csv
[Thu May 23 04:20:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 04:20:01 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu May 23 04:20:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu May 23 04:20:01 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu May 23 04:20:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu May 23 04:20:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 04:20:17 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.957630 pixels away
[Thu May 23 04:20:17 2013] Vigneting correction estimate = 1.000000
[Thu May 23 04:20:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 04:20:17 2013] Assessing source extent using major
[Thu May 23 04:20:17 2013] Source does appear to be extended
[Thu May 23 04:20:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 04:20:17 2013] Deleting source due to low Poisson probability 0.9