[Thu May 23 01:12:12 2013] Detection parameters:
  Position = (327.7, 316.9) = 20 44 5.58 -10 43 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1140.5 +/- 54.8
  Background counts = 48.6
  Rate = 0.02 +/- 0.001

[Thu May 23 01:12:14 2013] Off-axis axis estimate = 2.51'
[Thu May 23 02:26:53 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Thu May 23 02:26:53 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Thu May 23 02:26:53 2013] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.584
[Thu May 23 02:26:53 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.68"
[Thu May 23 04:19:58 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 23 04:19:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src3.csv
[Thu May 23 04:19:58 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 23 04:19:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src3.csv
[Thu May 23 04:19:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 04:20:00 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 23 04:20:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 23 04:20:00 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 23 04:20:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 23 04:20:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 04:20:17 2013] Source 3 is offset by -4.468068 and -1.530289 pixels which is larger than
2 X fitted extent = 1.044860 x 1.044860, not incorporating fit results
[Thu May 23 04:20:17 2013] Vigneting correction estimate = 1.000000
[Thu May 23 04:20:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 04:20:17 2013] Assessing source extent using major
[Thu May 23 04:20:17 2013] Source does appear to be extended
[Thu May 23 04:20:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 04:20:17 2013] Source is confused with source 4
[Thu May 23 04:56:35 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Thu May 23 04:56:35 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Thu May 23 04:56:35 2013] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.584
[Thu May 23 04:56:35 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.68"
[Thu May 23 06:04:32 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 23 06:04:32 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 23 06:04:32 2013] Fit fullrun_mos2_xmm0601390401_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu May 23 06:04:32 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 23 06:04:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 23 06:04:32 2013] fullrun_mos2_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 23 06:04:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 23 06:04:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 06:04:37 2013] Spatial fit model total counts = 19157.200000, observed total counts = 19047.000000
[Thu May 23 06:04:37 2013] Offset between fit and detection position for source 3 = 4.282134 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.282134 pixels
  Position = (331.5, 318.8) = 20 44 4.45 -10 42 58.2
  Extent = 15.4 (14.4-30.7)" x 8.7 (8.4-8.8)", rotation angle = 339 (337-341) degrees
  Source counts = 7399.6 +/- 86.0
  Background counts = 0.0
  Rate = 0.1 +/- 0.001
[Thu May 23 06:04:37 2013] Vigneting correction estimate = 1.000000
[Thu May 23 06:04:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 06:04:37 2013] Assessing source extent using major axis lower bound
[Thu May 23 06:04:37 2013] Source does appear to be extended
[Thu May 23 06:04:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.64
[Thu May 23 06:04:37 2013] Source is asymmetric
[Thu May 23 07:04:45 2013] Counts = 7399.640000, rescaling region sizes by 2.000000
[Thu May 23 07:04:45 2013] XMMSAS src. selection expression = ellipse(28792.628000, 27685.977800, 1843.620053, 1041.644430, 339.042700, X, Y)
[Thu May 23 07:04:45 2013] Writing source region out to fullrun_mos2_xmm0601390401_pi300-10000_pass1_cl_src3_src.reg
[Thu May 23 07:04:45 2013] Extracting stamp from image fullrun_mos2_xmm0601390401_pi300-10000_cl_sm2.00.img.gz, (226, 213) - (437, 425)
[Thu May 23 07:04:45 2013] XMMSAS bgd. selection expression = annulus(28792.628000, 27685.977800, 6145.400177, 12290.800354, X, Y) && !ellipse(27204.084000, 27136.508200, 1747.987250, 1609.245646, 19.362200, X, Y) && !ellipse(28206.157166, 26585.057343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28307.717346, 27083.958588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33324.641400, 33989.223000, 652.604819, 266.197608, 19.564622, X, Y) && !ellipse(37581.769196, 20982.194153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33073.303772, 39973.608093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.291718, 37731.281860, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 23 07:04:45 2013] Writing fullrun_mos2_xmm0601390401_pi300-10000_pass1_cl_src3.gif
[Thu May 23 07:14:05 2013] Mean detx,y = (-34.78, 393.34) 
[Thu May 23 07:14:08 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 07:18:42 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 07:18:42 2013] Setting source spectrum file to fullrun_mos2_xmm0601390401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 23 07:18:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0601390401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 23 08:24:06 2013] Updating aperture counts using extracted products
[Thu May 23 08:24:06 2013] Total counts from fullrun_mos2_xmm0601390401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 47241.00
[Thu May 23 08:24:06 2013] Total counts from fullrun_mos2_xmm0601390401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 44094.00
[Thu May 23 08:24:06 2013] Got source and background scale factors 1427913.000000, 272688650.000000
[Thu May 23 08:24:06 2013] User source parameters:
  Position = (331.5, 318.8) = 20 44 4.45 -10 42 58.2
  Extent = 15.4 (14.4-30.7)" x 8.7 (8.4-8.8)", rotation angle = 339 (337-341) degrees
  Source aperture counts = 47010.1 +/- 218.4
  Background aperture counts = 230.9
  Rate = 0.8 +/- 0.004

[Thu May 23 08:24:08 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 08:24:08 2013] Using photon index=1.80, rate=0.122, arf fullrun_mos2_xmm0601390401_pi300-10000_pass1_cl_src3.arf
[Thu May 23 08:24:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 08:24:08 2013] Getting flux using calc_pl_flux failed
[Thu May 23 08:24:11 2013] Flag b found in src. 3 procflags, skipping spectral fitting
[Thu May 23 08:24:11 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Thu May 23 08:24:14 2013] xmm0601390401/analysis//spectral/fullrun_mos2_xmm0601390401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete