[Sun Jul 15 01:52:32 2012] Detection parameters:
  Position = (316.8, 311.2) = 20 44 9.74 -10 43 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 523352.1 +/- 796.2
  Background counts = 53.3
  Rate = 9 +/- 0.01

[Sun Jul 15 01:52:33 2012] Off-axis axis estimate = 1.63'
[Sun Jul 15 03:09:21 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 03:09:21 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Jul 15 03:09:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Sun Jul 15 03:09:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sun Jul 15 04:04:45 2012] fullrun_mos2_xmm0601390201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 15 04:04:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 04:04:45 2012] fullrun_mos2_xmm0601390201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 15 04:04:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 04:04:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 04:04:45 2012] fullrun_mos2_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 15 04:04:45 2012] fullrun_mos2_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 15 04:04:45 2012] Fit fullrun_mos2_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 15 04:04:57 2012] Spatial fit model total counts = 459729.000000, observed total counts = 466544.000000
[Sun Jul 15 04:04:57 2012] Offset between fit and detection position for source 1 = 0.277413 pixels
[Sun Jul 15 04:04:57 2012] 435010.000000 total counts/ 25600.000000 bgd. counts: snr = 2558.812500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.277413 pixels
  Position = (316.7, 311.5) = 20 44 9.79 -10 43 25.5
  Extent = 6.6 (6.6-6.6)", rotation angle = 0
  Source counts = 409410.0 +/- 659.6
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Sun Jul 15 04:04:57 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 04:04:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 04:04:57 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 04:04:57 2012] Source does appear to be extended
[Sun Jul 15 04:04:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 09:00:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 09:00:56 2012] Initial guess for spatial extent in simple fitting = 6.59"
[Sun Jul 15 09:00:56 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.986
[Sun Jul 15 09:00:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.59"
[Sun Jul 15 09:23:29 2012] fullrun_mos2_xmm0601390201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 15 09:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 09:23:29 2012] fullrun_mos2_xmm0601390201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 15 09:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0601390201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 09:23:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0601390201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0601390201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:23:29 2012] fullrun_mos2_xmm0601390201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 15 09:23:29 2012] fullrun_mos2_xmm0601390201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 15 09:23:29 2012] Fit fullrun_mos2_xmm0601390201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 15 09:23:33 2012] Spatial fit model total counts = 444289.000000, observed total counts = 467359.000000
[Sun Jul 15 09:23:33 2012] Offset between fit and detection position for source 1 = 0.009347 pixels
[Sun Jul 15 09:23:33 2012] 436993.000000 total counts/ 25600.000000 bgd. counts: snr = 2571.206250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.009347 pixels
  Position = (316.7, 311.4) = 20 44 9.80 -10 43 25.5
  Extent = 6.6 (6.6-6.7)", rotation angle = 0
  Source counts = 411393.0 +/- 661.1
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Sun Jul 15 09:23:33 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 09:23:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 09:23:33 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 09:23:33 2012] Source does appear to be extended
[Sun Jul 15 09:23:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 12:32:05 2012] Counts = 411393.000000, rescaling region sizes by 3.000000
[Sun Jul 15 12:32:05 2012] XMMSAS src. selection expression = ellipse(27502.600400, 27047.595800, 1196.532034, 1196.532034, 0.000000, X, Y)
[Sun Jul 15 12:32:05 2012] Writing source region out to fullrun_mos2_xmm0601390201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 15 12:32:05 2012] Extracting stamp from image fullrun_mos2_xmm0601390201_pi300-10000_cl_sm2.00.img.gz, (248, 243) - (385, 380)
[Sun Jul 15 12:32:05 2012] XMMSAS bgd. selection expression = annulus(27502.600400, 27047.595800, 5982.660172, 11965.320344, X, Y) && !ellipse(28391.141022, 26674.056580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37886.598419, 20902.009613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33618.545898, 33896.280548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26955.144531, 37645.274841, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 12:32:05 2012] Writing fullrun_mos2_xmm0601390201_pi300-10000_pass1_cl_src1.gif
[Sun Jul 15 12:32:38 2012] Mean detx,y = (-13.74, -105.03) 
[Sun Jul 15 12:32:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 12:36:57 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 12:36:57 2012] Setting source spectrum file to fullrun_mos2_xmm0601390201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 12:36:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0601390201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 15 12:46:43 2012] Updating aperture counts using extracted products
[Sun Jul 15 12:46:43 2012] Error reading totcts from fullrun_mos2_xmm0601390201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 12:46:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 12:46:44 2012] Using photon index=1.80, rate=6.84, arf fullrun_mos2_xmm0601390201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 15 12:46:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 12:46:44 2012] Updating source flux to 6.4e-11
[Sun Jul 15 12:47:44 2012] Reading fit data from xmm0601390201/analysis//spectral/fullrun_mos2_xmm0601390201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 15 12:47:44 2012] Spectral fit parameter nH value = 6.55803e+14
[Sun Jul 15 12:47:44 2012] Spectral fit parameter PhoIndex value = 1.93557
[Sun Jul 15 12:47:44 2012] Failed to get F(0.3-8.0) from xmm0601390201/analysis//spectral/fullrun_mos2_xmm0601390201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 12:47:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 12:47:44 2012] Using Nh = 6.6e+14, photon index=1.94, rate=6.84, arf fullrun_mos2_xmm0601390201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 15 12:47:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 12:47:44 2012] Updating source flux to 6e-11