[Sun Jul 15 01:52:08 2012] Detection parameters:
  Position = (409.5, 354.9) = 20 43 42.41 -10 40 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.7 +/- 12.2
  Background counts = 30.2
  Rate = 0.001 +/- 0.0002

[Sun Jul 15 01:52:08 2012] Off-axis axis estimate = 9.03'
[Sun Jul 15 02:40:27 2012] Using EEF radius (= 10.94 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 02:40:27 2012] Initial guess for spatial extent in simple fitting = 10.94"
[Sun Jul 15 02:40:27 2012] source mask rpix=2.5, npix_max = 36, mask sum = 20, frac = 0.550
[Sun Jul 15 02:40:27 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.94"
[Sun Jul 15 03:09:21 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jul 15 03:09:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src10.csv
[Sun Jul 15 03:09:21 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jul 15 03:09:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src10.csv
[Sun Jul 15 03:09:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 03:09:21 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jul 15 03:09:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jul 15 03:09:21 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jul 15 03:09:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun Jul 15 03:09:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 04:04:52 2012] Source 13 is offset by 6.237585 and -4.907995 pixels which is larger than
2 X fitted extent = 1.692492 x 1.692492, not incorporating fit results
[Sun Jul 15 04:04:52 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 04:04:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 04:04:52 2012] Assessing source extent using major
[Sun Jul 15 04:04:52 2012] Source does appear to be extended
[Sun Jul 15 04:04:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 04:04:52 2012] Deleting source due to low Poisson probability 0.9