[Sun Jul 15 01:52:08 2012] Detection parameters:
  Position = (316.7, 311.2) = 20 44 9.78 -10 43 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 539523.2 +/- 861.7
  Background counts = 46.3
  Rate = 9 +/- 0.01

[Sun Jul 15 01:52:08 2012] Off-axis axis estimate = 1.62'
[Sun Jul 15 02:40:27 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 02:40:27 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Jul 15 02:40:27 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Sun Jul 15 02:40:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sun Jul 15 03:09:21 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 15 03:09:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 03:09:21 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 15 03:09:21 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 15 03:09:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 03:09:21 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 15 03:09:21 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 15 03:09:21 2012] Fit fullrun_mos1_xmm0601390201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 15 04:04:52 2012] Spatial fit model total counts = 442389.000000, observed total counts = 475790.000000
[Sun Jul 15 04:04:52 2012] Offset between fit and detection position for source 1 = 0.197772 pixels
[Sun Jul 15 04:04:52 2012] 442024.000000 total counts/ 25600.000000 bgd. counts: snr = 2602.650000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.197772 pixels
  Position = (316.7, 311.4) = 20 44 9.79 -10 43 25.6
  Extent = 6.8 (6.7-6.8)", rotation angle = 0
  Source counts = 416424.0 +/- 664.8
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Sun Jul 15 04:04:52 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 04:04:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 04:04:52 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 04:04:52 2012] Source does appear to be extended
[Sun Jul 15 04:04:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 04:47:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 15 04:47:58 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Sun Jul 15 04:47:58 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Sun Jul 15 04:47:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.75"
[Sun Jul 15 09:00:56 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 15 09:00:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601390201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 09:00:56 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 15 09:00:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0601390201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 15 09:00:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0601390201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0601390201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:00:56 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 15 09:00:56 2012] fullrun_mos1_xmm0601390201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 15 09:00:56 2012] Fit fullrun_mos1_xmm0601390201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 15 09:23:32 2012] Spatial fit model total counts = 445001.000000, observed total counts = 474757.000000
[Sun Jul 15 09:23:32 2012] Offset between fit and detection position for source 1 = 0.132380 pixels
[Sun Jul 15 09:23:32 2012] 444240.000000 total counts/ 25600.000000 bgd. counts: snr = 2616.500000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.132380 pixels
  Position = (316.6, 311.5) = 20 44 9.81 -10 43 25.2
  Extent = 6.9 (6.9-6.9)", rotation angle = 0
  Source counts = 418640.0 +/- 666.5
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Sun Jul 15 09:23:32 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 09:23:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 09:23:32 2012] Assessing source extent using major axis lower bound
[Sun Jul 15 09:23:32 2012] Source does appear to be extended
[Sun Jul 15 09:23:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 11:08:46 2012] Counts = 418640.000000, rescaling region sizes by 3.000000
[Sun Jul 15 11:08:46 2012] XMMSAS src. selection expression = ellipse(27498.113600, 27053.990400, 1246.860238, 1246.860238, 0.000000, X, Y)
[Sun Jul 15 11:08:46 2012] Writing source region out to fullrun_mos1_xmm0601390201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 15 11:08:46 2012] Extracting stamp from image fullrun_mos1_xmm0601390201_pi300-10000_cl_sm2.00.img.gz, (245, 240) - (388, 383)
[Sun Jul 15 11:08:46 2012] XMMSAS bgd. selection expression = annulus(27498.113600, 27053.990400, 6234.301189, 12468.602377, X, Y) && !ellipse(33619.145410, 33880.148600, 496.213614, 496.213614, 0.000000, X, Y) && !ellipse(26902.436800, 37623.168200, 454.866413, 454.866413, 0.000000, X, Y) && !ellipse(33383.764313, 39871.211578, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 11:08:46 2012] Writing fullrun_mos1_xmm0601390201_pi300-10000_pass1_cl_src1.gif
[Sun Jul 15 11:09:18 2012] Mean detx,y = (104.69, -131.76) 
[Sun Jul 15 11:09:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 11:13:21 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 11:13:22 2012] Setting source spectrum file to fullrun_mos1_xmm0601390201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 11:13:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0601390201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 15 12:46:43 2012] Updating aperture counts using extracted products
[Sun Jul 15 12:46:43 2012] Error reading totcts from fullrun_mos1_xmm0601390201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 15 12:46:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 12:46:43 2012] Using photon index=1.80, rate=6.97, arf fullrun_mos1_xmm0601390201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 15 12:46:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 12:46:43 2012] Updating source flux to 6.1e-11
[Sun Jul 15 12:47:22 2012] Reading fit data from xmm0601390201/analysis//spectral/fullrun_mos1_xmm0601390201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 15 12:47:22 2012] Spectral fit parameter nH value = 1.4716e+13
[Sun Jul 15 12:47:22 2012] Spectral fit parameter PhoIndex value = 1.96364
[Sun Jul 15 12:47:22 2012] Failed to get F(0.3-8.0) from xmm0601390201/analysis//spectral/fullrun_mos1_xmm0601390201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 12:47:22 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 12:47:22 2012] Using Nh = 1.5e+13, photon index=1.96, rate=6.97, arf fullrun_mos1_xmm0601390201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 15 12:47:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 12:47:22 2012] Updating source flux to 5.7e-11